Video card for Vegas Video

Sark schrieb am 14.07.2003 um 01:11 Uhr
Hi

I'm just about to purchase Vegas Video, which I hope to use for editing video created in Flash.
Can anyone recommend a video editing card, or setup, that would enable me to preview through a video monitor.
I don't need capture capability, just something suited to VV's realtime preview function.

Any suggestion greatly appreciated.

Mark

Kommentare

Chienworks schrieb am 14.07.2003 um 03:28 Uhr
External preview is through the firewire (1394) port. If you have one of these in your computer already then you don't need a card. If you don't have one, then any cheap generic card that is OHCI compliant will do. Expect to pay $15 to $30.

To connect the firewire port to an external monitor you'll need some sort of external DV to analog converter. Lots of people use their DV camcorder for this, feeding it the DV signal from the computer and using it's analog out to connect to a television. Others use something like the Canopus ADVC-100 converter.
TheHappyFriar schrieb am 14.07.2003 um 05:26 Uhr
I belive Canopus makes a card that doesn DV/in out and Analog video in/out. It comes bundled with Vegas and isn't very expensive (around $450-500).

RBartlett schrieb am 14.07.2003 um 10:43 Uhr
For VGA preview - SoFo Vegas isn't fussy. A good 2D card, perhaps dual head, perhaps dual-head where you can extend the primary desktop over more than one monitor (as opposed to windows primary/secondary). That shortlists nvidia and Matrox P series to be extendable primary, AFAIK. That way you'll have more freedom with motion graphics and where their window is best located.

Sark, so you're heading down the route of playing with Flash! animations in Vegas?
Jsnkc schrieb am 14.07.2003 um 17:14 Uhr
I'd go with the Canopus AcedVio or something like that you get a great card plus Vegas for about the same price as Vegas alone, I believe it's around $499, but I know you can find it cheaper if you do a little searching.


http://www.canopus.us/US/products/ACEDVio/pm_ACEDVio.asp
Sark schrieb am 14.07.2003 um 20:48 Uhr
Thanks for the advice, it's greatly appreciated.

My current Matrox G450 will, I assume, give acceptable previews on the PC, but I want to see what I will be getting on a video monitor as DVD-R will be my intended final output. I guess it's a choice between the slightly more affordable 1394 card and an ADVC, or the more versatile Video Editing card route.

RBartlett.......Yes, just want to play around with Flash animations for home TV.

I had considered After Effects with a Matrox Parhelia which can preview from AE, but because I don't expect to be applying a lot of effects, other than the usual, color, deinterlace, etc, VV's audio tools with its realtime preview seemed a better choice. (The envelope function looks interesting as well). Also, I've never really liked the Adobe interface on a PC.

In your opinion is VV a good choice for video from Flash?

Thanks again for the replies.

Sark
Sark schrieb am 16.07.2003 um 02:03 Uhr
One other question I forgot to ask.

Does VV's MPEG-2 encoder hold its own amongst stand alone products.
I've been told Canopus Procoder is the best software encoder available, but this is a bit pricey for me at the moment.
I've tried TMPG, but have not yet purchased a video monitor to fully guage the results, but it seems reasonable on the PC's monitor.
Do VV users generally use its own encoder, or look elsewhere.

Thanks again.

Sark
BillyBoy schrieb am 16.07.2003 um 05:20 Uhr
Yes, the included MC encoder not only holds its own, it is on of the best software encoders for digital video regardless of price. Why? Because the version that comes with Vegas has been "tuned" to work best with what Vegas generates. Also do yourself a favor. Do NOT fiddle with the settings. This forum is filled with posts of people that have, only to report problems. The default settings are fine, 99.9% of the time.
Sark schrieb am 16.07.2003 um 22:29 Uhr
Thanks for the advice, it really is appreciated.

Sark