• Audio

  10 answers, most recent on 7/14/2025

  RE: Random part of audio track at start of render
  I don't understand then what "Random part of audio track at start of render" means- doesn't random mean it is audio from a random place on the timeline? There was an issue with noise at the end of certain audio events (never experienced it myself).
• Video

  31 answers, most recent on 5/23/2025

  RE: Render crawls with a green screen on the preview. I hate this software
  I'll check about the media, but I don't usually get to the crash stage. It just hangs. I've "fixed" the green screen issue, and now I have a memory leak issue. The usage just grows and grows until everything stops. Can't seem to disable GPU
• Video

  19 answers, most recent on 2/5/2025

  RE: Vegas Pro 22 Horrifically Slow HVEC rendering
  You can add two LUTs via the CGP at once. (input and output). You could also apply the two correction ones to the media as CGP at the media level and then a look LUT via CGP at the track level.Or use third-party software to merge the gamma and gamut
• Video

  33 answers, most recent Yesterday

  RE: Auto Captions for Vegas
  Speaker ID is very interesting. I was going to suggest a feature where speakers can be moved to their own track but I watched the tutorial video 11 and you've already implemented it under the find text feature!Users may not find it there so if it's
• Video

  39 answers, most recent on 1/30/2025

  RE: Some curiosity full questions about VEGAS's Future?
  It is unfortunate that Vegas Effects couldn't have continued as a plugin even if no further development was forthcoming from Artlist. I stll use the integration feature with Vegas and the full version of Hitfilm Pro. I still find the layers based
• Video

  12 answers, most recent on 2/26/2025

  RE: Add Media Across Tracks feature New Bug（VEGAS Pro 22 build 239）
  So if that is a virtual timeline/track does dragging the media onto it put that media into a virtual place whist still retaining a physical presence?🙃😂😉 Because when the event is double clicked the region is in the correct position.
• Video

  One answer, on 1/31/2025

  Understand vegas' proxy settings
  Hey, i have been trying to create my own proxies with ffmpeg which works well with some of my videos. So far I have understood that regardless what's the input frame rate, all proxies created by vegas have a frame rate of 23,976 (240000/1001). Some
• Video

  39 answers, most recent on 2/23/2025

  RE: VP21 -- ProRes file is read as 60fps instead of 59.94fps
  @rgr Your sample file does not have an audio track. Does your external application have the option of creating a still image sequence? If so, you can avoid the whole mess. A folder full of still images doesn't have a frame rate. A folder full of
• Scripting

  7 answers, most recent on 3/30/2025

  RE: [SOLVED] Timecode Format from "00:00:00,000" to "00:00:00.000"
  @tf_studio What language is your VEGAS set to? Set to US English, it uses a ";" or "." instead of "," (depending on the timecode format.) The one time I had a really hard to track down error in Excalibur was from another country running another
• Video

  13 answers, most recent on 5/28/2025

  RE: Close gaps leaves envelope points behind?
  @bitman Thanks yep, I just tried a Composite envelope on the video track & that also doesn't move with Close Gaps. ------------- I don't use this option very often but I just tried VP18 & 19, the envelope points don't move with Close Gaps
• Scripting

  12 answers, most recent on 7/11/2025

  enable Multicamera script
  Hello, @jetdv Is it possible to turn on/enable Multicamera view by script in C#? If no, is it any other possible way to enable this via script? I didn`t see any similar methods in documentation. I would like script to do these things: a) CTRL +
• Video

  3 answers, most recent on 5/16/2025

  RE: 2 Questions: Vegasaur Plugin + Deep Glow Alternative
  To your first question, I can confirm that Vegasaur is always automatically transferred to a new Vegasversion. I'm using Vegasaur several years and never had any issue using it in a newer version. The reason is that Vegasaur is actually a script
• Audio

  12 answers, most recent on 7/7/2025

  RE: Applied effects are disabled when changing the playback rate
  Yes, I can hear the FX dropout now. I used Volume FX as my non musical ears can detect a reduction in volume. Also I placed a mp3 music file on the track instead of ac3 audio camera clips. Interestingly although the FX mutes itself it doesn't untick
• Audio

  12 answers, most recent on 7/14/2025

  RE: Increase the volume of quiet sounds and decrease the loud sounds?
  ,Hi @ryan-hall34See the recent topic, which deals with a similar issue or erratic levels. In this case, I recommended the legacy Wave Hammer plug-in which is a two-stage comp/limiter with an auto gain option in the first stage which is controlled by
• Audio

  2 answers, most recent on 2/19/2025

  Multicamera Synchronize Audio Sync Fails in Vegas22 Build 239
  I have 3 tracks of video with audio in standard Sony file formats. I have one large track in .wav format. When I select all the tracks to sync by using the Multicamera synchronize audio feature, it will process for a couple of minutes and then crash
• Audio

  7 answers, most recent on 5/12/2025

  Event Heal Question
  I have an audio event on one track. There's a gap of silence that I want to remove between two sections of dialog. If I split the event and trim them to remove the silence, I then try to "event heal" them, but when it makes it a single event, it
• Video

  25 answers, most recent on 7/4/2025

  RE: Chroma Keyer "pictures of eyes" icons are missing in Vegas Pro 22
  I seldom use the Video FX window to apply effects, I normally use the Plug-In Chooser: @3POINT - Yes, I have selected my Video FX's both ways. Personally, I like using the VideoFX tab and then drag down into the track the FX-effects I wish to
• Video

  10 answers, most recent on 1/26/2025

  RE: Issues with rendering multi-track project as MP3
  The video file could be the cause of the issue. Try removing the video (picture) events from the timeline leaving just the audio, If that does not help, transcode the video's audio to PCM or render the video audio to a new track and remove the
• Video

  13 answers, most recent on 3/23/2025

  RE: Searching for downloaded video effects
  Please read the Readme.pdf that is included in the download package - it explains how to use the free transitions. In a nutshell, these transitions are not OFX transitions; rather, they are Vegas Pro projects that are placed on an upper track on the
• Audio

  10 answers, most recent on 4/4/2025

  Video and Audio Events screens open until I click on them to close
  My latest complaint. In Vegas 21 when I clicked on the FX on a track I would get a small box with the effect inside it, could work with it, and then click on it and it would go away.In 22 when I click on the FX I get a box that takes up half the
• Scripting

  5 answers, most recent on 5/27/2025

  Remove audio, increase speed, remove gaps
  Here is my manual process right now (Vegas Pro 14.00): - one video track + one audio track - grouped using "G" key - make a few splits, using "S" key, video and audio are always split at the same time marker - ungroup a few segments (not all, green
• Video

  6 answers, most recent on 3/9/2025

  RE: How to Quantize 2,698 Unquantized events at once...?
  If you're done with unquantized clip realignment, you can close the gaps: 1. select the track with the gaps 2. to close all gaps select all or none of the events 3. (menu) edit -> close gaps Otherwise, wait a bit and more users will come along
• Video

  17 answers, most recent on 4/21/2025

  RE: Vegas Pro 22 (239 Build) Timecode issue
  The work round I use is very straight forward, if you are a long time user of Vegas and lucky enough to have a previous going back in time from V.19 just start and sync your project as the TC works fine, save it and then re-open in V.22 lock your
• Video

  5 answers, most recent on 1/20/2025

  RE: Can I copy and past a single frame or section of an event?
  @beaverbrook Please tell me there is a way to simply copy and paste a single frame or section of frames. Zoom in to isolate the frame, press S then select the frame and press Ctrl+C. Now you can paste the frame anywhere else. Select the original