• Video

  20 answers, most recent 7 hours ago

  RE: GoPro Hero 5 Black video probem
  @Ruby888 I find your post a small bit confusing, maybe because i'm not familiar with gopro footage. The 1st video info is for mp41 which is considered nowadays to be near obsolete codec. The 2nd. one, avc, looks ok. Can you post mediainfo output of
• Video

  78 answers, most recent on 10/1/2025

  VP22 vs VP23 rendering speed, VP23 ½ slower than VP22...?
  I just downloaded the Trial & tested a very recent project created in VP22. (didn't want to hijack someone elses post) Exactly the same project, a mix of Samsung S23 phone clips & GoPro11 clips, all UHD 29.97fps. MediaInfo says variable for
• Video

  18 answers, most recent on 8/28/2025

  RE: Timeline Resets After 24 Hours in Vegas Pro 22
  I've never had a timeline anywhere nearing 24 hours or longer, the longest most recently being a bit under 9 hours which was a 4K project with video for the entire project being from a video camera, GoPro camera and phone video just mass grouped in
• Video

  8 answers, most recent on 7/6/2025

  RE: File I/O -> Experimental HEVC decoding: Has severe problem with a clip
  Experimental HEVC decoding was useful for me with GoPro 11 HEVC video in Vegas Pro 21 because it reduced the amount of stuttering on the timeline (not completely though). From various posts on the forum, the Vegas team have been developing VP's
• Video

  31 answers, most recent on 7/2/2025

  RE: RX 9070 Crashes whilst rendering in Vegas Pro 22 (build 250)
  @VEGAS-Daniel - Not really. At first I am setting up each of my projects as follows before doing anything more advanced such as color grading: Add clips to timeline Clips include a combination of Sony and GoPro. Both are H.264 4K at 25fps Select
• Video

  One answer, on 4/20/2025

  RE: How do I get 4096x2160 Video. I only see 8192x4320
  @keith-b Open Properties (cog wheel top left of the preview window) & type in the size you want. Modern GoPro's are MP4 HEVC so use Magix HEVC, if the size isn't already set open Custom Template & type in your settings, save it as a
• Video

  78 answers, most recent on 10/1/2025

  RE: VP22 vs VP23 rendering speed, VP23 ½ slower than VP22...?
  Did again a 3min timeline for rendering. Source: 10bit422AVC 4kHLG30/60p, 10bit420HEVC 4kHLG60p, 10bit422 ProRes HDR10 4k60p, 8bit goPro Protune flat color 2k60p, 8bit SDR fullHD25p.  V22 speed: 2min29sec, 72.48fps average.  V23 speed: 3min05sec,
• Video

  13 answers, most recent 16 hours ago

  RE: Suggestions for VEGAS Pro 23 - Addressing Performance and Stability.
  I can get by for the most part, compositing in Vegas alone. But I do see a need for "more". But I am wondering if there has been any real advancements in Hitfilm to justify using it, and it is subscription based. But if they get all the core
• DVD Architect

  14 answers, most recent on 8/18/2025

  RE: Using Davinci Resolve for video for BD, avoiding recompression?
  I've checked the reference frame number in MAGIX AVC/AAC renders that I've used for years in Vegas Pro and the reference frame number is always 4 - but that's for HD 25 fps projects, not 24 (23.976) fps projects. One of the failures of Resolve is
• Video

  32 answers, most recent on 6/17/2025

  RE: Big problems with 9070 XT
  I have a RX 9070. Using it for GPU acceleration for older video sources (.avi of 1080P or less) works great. However, with 4K MP4's from my Sony and GoPro I find that occasional clips in my timeline will be grossly pixelated in the rendered MP4. I
• Video

  36 answers, most recent on 7/29/2025

  RE: Are you EU people shooting in 30P if it's a purely youtube project?
  @3POINT ... Today's TV'S and PC monitors are not depending on the 50/60Hz electricity frequency of the local network. I completely and fully understand that, but the video in my projects is substantially sourced from other cameras which are
• Video

  2 answers, most recent on 8/27/2025

  RE: At what point do you spread your media to separate disks?
  ... at what amount of load do you start spreading the footage to separate disks for reading spead and timeline performance? So many variables influence this. When adding 8+ hours 4K camera, GoPro and phone video to my low-to-medium powered laptop
• Video

  36 answers, most recent on 7/29/2025

  RE: Are you EU people shooting in 30P if it's a purely youtube project?
  @3POINT  ... Optical flow rendering in Vegas is a pita, takes ages...try (and compare) optical flow in DR. Totally agreed that rendering in DR with Optical Flow is so much faster than in VP - and DR has bulk rendering which is really great. When
• Video

  4 answers, most recent on 5/11/2025

  Continued crashing of Vegas Pro 22 on new system
  Long time user of Vegas Pro, and I am about to give up and go and buy and teach myself Adobe Premiere due to the untenable crashes that I continue to get with this software. I recently have even built a new system(specs below), and the crashing
• Video

  78 answers, most recent on 10/1/2025

  RE: VP22 vs VP23 rendering speed, VP23 ½ slower than VP22...?
  @Reyfox Thanks, yep me too. I've been down the alternate editor route before & came back to VP, in fact the other day I opened DaVinci again for the first time after a yr or two & within ½hr I'd decided I'll stick with VP22. My latest
• Video

  10 answers, most recent on 9/18/2025

  RE: VEGAS Pro 23 - Jerky and Laggy Audio Dragging on Timeline
  @Abdali: Could you please describe what you mean by 'extracted'. What's your workflow? We would like to reproduce it. By "extracted," I meant the standard process of working with an audio event that has been separated from a video clip. Here is a
• Video

  10 answers, most recent on 9/18/2025

  RE: VEGAS Pro 23 - Jerky and Laggy Audio Dragging on Timeline
  Does it matter what kind of audio it is? PCM WAV? MP3? AAC from a video?It's not just that it's snapping to frames is it? After further testing, I've found that the issue is specific to the media type. The jerky and laggy behavior happens with audio
• Video

  31 answers, most recent on 7/2/2025

  RE: RX 9070 Crashes whilst rendering in Vegas Pro 22 (build 250)
  @Reyfox - I can see from my comment on 25/06 I had a crash at about 16:25. I see that I have a rendered video made at 17:21 the same day, so I assume that was the same project, but rendered successfully that time. So, I have uploaded the .veg
• Video

  36 answers, most recent on 7/29/2025

  RE: Are you EU people shooting in 30P if it's a purely youtube project?
  @3POINT  ... Optical flow rendering in Vegas is a pita, takes ages...try (and compare) optical flow in DR. Totally agreed that rendering in DR with Optical Flow is so much faster than in VP - and DR has bulk rendering which is really great. When
• Offtopic

  24 answers, most recent on 9/25/2025

  RE: I'm Tired of Vegas Slander
  @chell ... Have you ever used silhouette standalone? No, I've never used Silhouette at all. But BorisFX's Particle Illusion (OFX plugin) uses nodes. How long ago did you start using Vegas? I got ULead Video Studio (it may have been an SE version)
• Video

  31 answers, most recent on 7/2/2025

  RE: RX 9070 Crashes whilst rendering in Vegas Pro 22 (build 250)
  I tried to find the best VP settings for my hardware (Ryzen 7 9700X, RX 6600 8 GB) & my footage (see below) & my editings in Full HD (1080-60p) and I ended up with:1. Video tab: Using RX6600, Dynamic RAM Preview 5% (default) 2. File I/O tab:
• Video

  31 answers, most recent on 7/2/2025

  RE: RX 9070 Crashes whilst rendering in Vegas Pro 22 (build 250)
  @Solmea - I normally render to HEVC, but can use AVC instead. I tried the option, with and without enabled. For a 24min timeline of GoPro HEVC 4K media: MAGIX AVC (AMD VCE) - Legacy AVC decoding = Disable = Render time = 5min 35s & 4.72Gb MAGIX
• Video

  10 answers, most recent on 6/2/2025

  V22 - Build 250 - Laggy and Slow playback/editing
  Hi,Would someone be able to suggest a way of reducing the lag when editing? Admittedly I’m using a lot of 4K footage ( MXF. GoPro 11 and DJI Mavic 3 Pro), although I've converted all the video files to proxies in Vegas. Even so, it’s still very,
• Video

  8 answers, most recent on 7/6/2025

  File I/O -> Experimental HEVC decoding: Has severe problem with a clip
  I have been using the option in preferences: File I/O ->Enable experimental HEVC decoding. I noticed recently whilst rendering a series of clips (11 clips = 8min 26sec) that at about 46% into the render it slowed down substantially. Using a