• Video

  8 answers, most recent on 4/4/2025

  RE: Grouping, moving, ungrouping
  Hi, Thanks to all for the help. What I found is, to break the connection between all of the tracks is, remove all the tracks from the group, then click on the colored part of the header and then all works normally. Click on the M one track and only
• Video

  28 answers, most recent on 4/15/2025

  RE: Broadcast Safe - V22 vs V17
  I tested here with 8-bit legacy projects in 21 and 22 and the behavior seems the same. Adding a broadcast color set to extremely conservative after other edits (in this case color curves) tames superwhites back to 235. I tried a similar MXF render
• Video

  37 answers, most recent on 3/5/2025

  RE: Equalize Histogram setting in White Balance FX
  @3POINT Thanks for the additional information, and the example illustrates the problem with SeMW Autolevel. By the way, who is this person that developed Graide Color Match and Graide Color Curves? Jøran Toresen That's a german engineer, Michael
• Video

  119 answers, most recent on 6/20/2025

  RE: VEGAS Pro 22 Build 239 General Discussion
  i9 9900K64GB DDR4 3200MhzNvidia RTX 4060 8GByes I use LUT fx and wheel colors I had no problems before. short projects that are 3-4 minutes long do the trick. But a longer project of 1.5-2 hours is unfortunately not possible
• Video

  11 answers, most recent on 2/19/2025

  RE: iPhone videos' colours change after importing into Vegas pro 22
  @Furqan Edit time is limited, so forgot to add to my previous post … “With Media properties Color space set to Rec. 2020 ST2084 (1000 nits)” Is auto detected. I haven’t checked but Mark-Y may already also have an iPhone lut.  
• Video

  12 answers, most recent on 3/27/2025

  VP Various Recent Builds & NVIDIA RTX 3050 Ti Cards
  Is anyone have success editing 10-bit HEVC with NVIDIA notebook cards? The last couple builds/versions of Vegas have just been terrible for me. Things have progressed from manageable-but-frequent app crashes to total OS crashes that require a hard
• Video

  8 answers, most recent on 5/8/2025

  RE: FX's are ruining the video,causing glitches or fx disable themselves
  @hagi10 Hi, can you add your pc specs, look in Taskmanager to see what's happening & how much you have set in Preferences - Video - Dynamic RAM Preview ? . I just added Colorize to a random clip & RAM slowly increased with each loop play,
• Video

  3 answers, most recent on 3/16/2025

  RE: V-Log Footage
  There are a few different workflows. You could try ACES by switching the project to 32-bit full with view transform set to sRGB. Then set the color space (right click on the media and go to properties) to Vlog/vgamut. Alternatively you can use a
• Video

  40 answers, most recent on 7/7/2025

  RE: render freezes and got black screens
  Since it says the error was with an Fx, what Fx were in use? If it was the LUT Fx can you try adding a LUT via the color grading panel instead? it was the lut filter. I still have to test it out with the grading panel. Even a simple white balance
• Video

  37 answers, most recent on 3/5/2025

  RE: Equalize Histogram setting in White Balance FX
  @J-Toresen Another difference is the way of use. Semw Autolevels can be used as Event, Media, Track or as Project Fx, while Vegas Auto color fx only can be used as Event Fx. That's why I asked @jetdv to write a script to apply this Fx to multiple
• Video

  37 answers, most recent on 3/5/2025

  RE: Equalize Histogram setting in White Balance FX
  I haven't messed with the color grading panel much as I notice it seems to feel clunky and slow. I think when you apply effects using it, the encodes are slower too. @J-Toresen that's a good question. I downloaded the AutoLevel FX, thanks for
• Video

  5 answers, most recent on 4/21/2025

  RE: Disappearing OFX support in VEGAS Pro – Where is the alternative?
  I sincerely hope VEGAS builds more of its own internal capabilities going forward.Because honestly, VEGAS Pro is a program I truly love—and I never want to leave it. As you said, I also hope the video engine overhaul is completed successfully.I'm
• Video

  119 answers, most recent on 6/20/2025

  RE: VEGAS Pro 22 Build 239 General Discussion
  Unfortunately, I won't check. I just went back to builid 194 @AdasRu Thanks for that detail.Can you try to use the LUT as part of the color grading panel (you can use up to 2 per CGP) instead of the LUT Fx and see if it completes?   
• Video

  13 answers, most recent on 2/20/2025

  RE: V22 239 cannot render project, crashes every time
  I don't use ACES, although I found it to be the most color accurate transform.. I use the Vegas LUT filter in the track FX with a Phantom LUT. ACES is greyed out. I never use it as I work with LUTS to transform my LOG footage. You couldn't share
• Video

  20 answers, most recent on 5/9/2025

  RE: Wanting to get a new camcorder that uses MOV 10 bit
  Recently I started to use Panasonic X1500 and recording in 4K-60p 10bits (both mov & mp4): Video ID                                       : 1 Format                                   : HEVC Format/Info                              : High
• Video

  10 answers, most recent on 6/2/2025

  V22 - Build 250 - Laggy and Slow playback/editing
  Hi,Would someone be able to suggest a way of reducing the lag when editing? Admittedly I’m using a lot of 4K footage ( MXF. GoPro 11 and DJI Mavic 3 Pro), although I've converted all the video files to proxies in Vegas. Even so, it’s still very,
• Video

  9 answers, most recent on 6/26/2025

  [Closed] ACES/32-full & sLOG3
  Am I crazy or is Vegas applying all clip/track/bus-level fx before the transform from sLog3 to REC709 inc CG Panel? There's no way to grade footage with this behavior! sLOG3 footage on 32FR timeline clip-->properties-->color space
• Video

  20 answers, most recent on 4/2/2025

  RE: Does anyone know what the 'life is a stage' option is?
  Hi.it's actually 'All life''s a stage'. It's in internal preferences. Scroll down and its just above a group of color grading options. You can't search for it. It's in 22 Pro. Please let me know if you have any luck!
• Video

  10 answers, most recent Yesterday

  Introduce 16-bit Floating Point Pixel Format in VEGAS Pro 23
  Dear VEGAS Pro Development Team and Community, I'd like to propose a feature request for the inclusion of a 16-bit floating-point pixel format option within VEGAS Pro 23 Project Properties. Currently, VEGAS Pro offers 8-bit and 32-bit floating-point
• Video

  3 answers, most recent on 1/21/2025

  [Solved] VP18 - Frames color corrupted if rendered in H265 with high bit rate
  Some basic information: CPU: AMD Ryzen 5600X GPU: AMD RX 6750XT Ram: 32GB OS: Windows 10 loT Enterprise LTSC (21H2) Vegas Pro version 18   Issue: The original video (*.mp4) was game screen record by AMD's video card driver software Adrenalin
• Video

  8 answers, most recent on 5/9/2025

  RE: AVI (UT Video) files and limited-full range - problem
  My question was more if it's possible to do any color manipulation in VEGAS only affecting luminance so as to output compliant XvYCC. I suppose if you make no changes it's just a passthrough.Did UT YUV files ever work as you expect in VEGAS? (Have
• Video

  9 answers, most recent on 6/26/2025

  RE: [Closed] ACES/32-full & sLOG3
  @ALO I think you're right that cgp is not operating in Rec709 color space when it is selected as a view transform. Which functions only for viewing the display. If you really want to edit in Rec709 space, you need to apply the log to the footage via
• Video

  19 answers, most recent on 2/5/2025

  RE: Vegas Pro 22 Horrifically Slow HVEC rendering
  You can add two LUTs via the CGP at once. (input and output). You could also apply the two correction ones to the media as CGP at the media level and then a look LUT via CGP at the track level.Or use third-party software to merge the gamma and gamut
• Video

  14 answers, most recent on 4/6/2025

  Question: 8 vs 10-bit HEVC Renders?
  Working within an 8-bit project (ie, 8-bit FR or legacy), with 10-bit footage on the timeline, does it make any difference if the render is set to 8 or 10-bit color depth? I would think no...but who knows?