• Video

  119 answers, most recent on 6/20/2025

  RE: VEGAS Pro 22 Build 239 General Discussion
  i9 9900K64GB DDR4 3200MhzNvidia RTX 4060 8GByes I use LUT fx and wheel colors I had no problems before. short projects that are 3-4 minutes long do the trick. But a longer project of 1.5-2 hours is unfortunately not possible
• Video

  11 answers, most recent on 2/19/2025

  RE: iPhone videos' colours change after importing into Vegas pro 22
  @Furqan Edit time is limited, so forgot to add to my previous post … “With Media properties Color space set to Rec. 2020 ST2084 (1000 nits)” Is auto detected. I haven’t checked but Mark-Y may already also have an iPhone lut.  
• Video

  8 answers, most recent on 5/8/2025

  RE: FX's are ruining the video,causing glitches or fx disable themselves
  @hagi10 Hi, can you add your pc specs, look in Taskmanager to see what's happening & how much you have set in Preferences - Video - Dynamic RAM Preview ? . I just added Colorize to a random clip & RAM slowly increased with each loop play,
• Video

  8 answers, most recent on 8/22/2025

  RE: banding with 10 bit between versions 21 and 22
  What is the source footage? https://www.vegascreativesoftware.info/us/forum/faq-how-to-post-mediainfo-and-vegas-pro-file-properties--104561/ Are you using a LUT to transform it from log to REC709? In the color grading panel or with the LUT Fx? If
• Video

  12 answers, most recent on 3/27/2025

  VP Various Recent Builds & NVIDIA RTX 3050 Ti Cards
  Is anyone have success editing 10-bit HEVC with NVIDIA notebook cards? The last couple builds/versions of Vegas have just been terrible for me. Things have progressed from manageable-but-frequent app crashes to total OS crashes that require a hard
• Video

  27 answers, most recent on 12/12/2024

  RE: Preview window showing proxy on event with fx small lower left corner
  I have a similar spec PC as yours. I also edit UHD 4K, but have never used proxy editing. My source footage is from Panasonic. A lot is 422 10bit 150Mb/s. My Preview is mostly Best or Good, Full or Half. I've used both event Pan/Crop and color
• Video

  3 answers, most recent on 3/16/2025

  RE: V-Log Footage
  There are a few different workflows. You could try ACES by switching the project to 32-bit full with view transform set to sRGB. Then set the color space (right click on the media and go to properties) to Vlog/vgamut. Alternatively you can use a
• Video

  19 answers, most recent on 1/5/2025

  RE: Video Preview Window has a Shaded Grey Hue over video preview
  RogerS - I looked at the track level and there are no video FX that I can see. The raw video footage previews correctly at full color when I drag a new clip into the timeline. Adis-a - I did raise the fader. Thank you for any input here.
• Video

  26 answers, most recent on 1/12/2025

  RE: Color grading in Vegas
  @Jarrod-Fegley The 2nd clip required almost no grading at all. I tweaked the lift a smidgen for richer blacks but that's an acquired taste from someone who shoots allot of piano shaped objects. I set the project to 8bit-full even though the footage
• Video

  52 answers, most recent Yesterday

  RE: VPro 23 release Date hint?
  With one more day to release, I can say looking at the .PDF file, that this is a big "yes" for me. The Color Grading Panel for sure I am thrilled about. I can't wait to dock the thing to the bottom of my Vegas workspace! Camera LUT's? Oh my! This
• Video

  3 answers, most recent on 1/21/2025

  [Solved] VP18 - Frames color corrupted if rendered in H265 with high bit rate
  Some basic information: CPU: AMD Ryzen 5600X GPU: AMD RX 6750XT Ram: 32GB OS: Windows 10 loT Enterprise LTSC (21H2) Vegas Pro version 18   Issue: The original video (*.mp4) was game screen record by AMD's video card driver software Adrenalin
• Video

  40 answers, most recent on 7/7/2025

  RE: render freezes and got black screens
  Since it says the error was with an Fx, what Fx were in use? If it was the LUT Fx can you try adding a LUT via the color grading panel instead? it was the lut filter. I still have to test it out with the grading panel. Even a simple white balance
• Video

  5 answers, most recent on 4/21/2025

  RE: Disappearing OFX support in VEGAS Pro – Where is the alternative?
  I sincerely hope VEGAS builds more of its own internal capabilities going forward.Because honestly, VEGAS Pro is a program I truly love—and I never want to leave it. As you said, I also hope the video engine overhaul is completed successfully.I'm
• Video

  37 answers, most recent on 3/5/2025

  RE: Equalize Histogram setting in White Balance FX
  @J-Toresen Another difference is the way of use. Semw Autolevels can be used as Event, Media, Track or as Project Fx, while Vegas Auto color fx only can be used as Event Fx. That's why I asked @jetdv to write a script to apply this Fx to multiple
• Video

  37 answers, most recent on 3/5/2025

  RE: Equalize Histogram setting in White Balance FX
  I haven't messed with the color grading panel much as I notice it seems to feel clunky and slow. I think when you apply effects using it, the encodes are slower too. @J-Toresen that's a good question. I downloaded the AutoLevel FX, thanks for
• Video

  119 answers, most recent on 6/20/2025

  RE: VEGAS Pro 22 Build 239 General Discussion
  Unfortunately, I won't check. I just went back to builid 194 @AdasRu Thanks for that detail.Can you try to use the LUT as part of the color grading panel (you can use up to 2 per CGP) instead of the LUT Fx and see if it completes?   
• Video

  20 answers, most recent on 5/9/2025

  RE: Wanting to get a new camcorder that uses MOV 10 bit
  Recently I started to use Panasonic X1500 and recording in 4K-60p 10bits (both mov & mp4): Video ID                                       : 1 Format                                   : HEVC Format/Info                              : High
• Video

  13 answers, most recent on 2/20/2025

  RE: V22 239 cannot render project, crashes every time
  I don't use ACES, although I found it to be the most color accurate transform.. I use the Vegas LUT filter in the track FX with a Phantom LUT. ACES is greyed out. I never use it as I work with LUTS to transform my LOG footage. You couldn't share
• Video

  9 answers, most recent on 6/26/2025

  [Closed] ACES/32-full & sLOG3
  Am I crazy or is Vegas applying all clip/track/bus-level fx before the transform from sLog3 to REC709 inc CG Panel? There's no way to grade footage with this behavior! sLOG3 footage on 32FR timeline clip-->properties-->color space
• Video

  10 answers, most recent on 6/2/2025

  V22 - Build 250 - Laggy and Slow playback/editing
  Hi,Would someone be able to suggest a way of reducing the lag when editing? Admittedly I’m using a lot of 4K footage ( MXF. GoPro 11 and DJI Mavic 3 Pro), although I've converted all the video files to proxies in Vegas. Even so, it’s still very,
• Video

  20 answers, most recent on 4/2/2025

  RE: Does anyone know what the 'life is a stage' option is?
  Hi.it's actually 'All life''s a stage'. It's in internal preferences. Scroll down and its just above a group of color grading options. You can't search for it. It's in 22 Pro. Please let me know if you have any luck!
• Video

  2 answers, most recent on 12/22/2024

  RE: Variable Frame Rate vs 29.97 Fixed vs 30 Fixed
  Most low cost or phone cameras do not have an aperture to control the light coming in. Cameras will vary the frame rate to compensate. You can test this by shooting low light and see if the frame rate is slower than a bright day shot. 30fps should
• Video

  10 answers, most recent on 7/17/2025

  Introduce 16-bit Floating Point Pixel Format in VEGAS Pro 23
  Dear VEGAS Pro Development Team and Community, I'd like to propose a feature request for the inclusion of a 16-bit floating-point pixel format option within VEGAS Pro 23 Project Properties. Currently, VEGAS Pro offers 8-bit and 32-bit floating-point
• Video

  14 answers, most recent on 12/4/2024

  RE: Alternatives for BRAW Editing?
  All the sample files of BRAW that I have tried all play back at full frame rate. Even with adding color grading. But as posted above, you've failed to include your computer specs. Why not enter them into your User Profile>Signature like mine