• Audio

  35 answers, most recent on 7/1/2013

  RE: burning bad audio cd's
  This is my first post to the Audio forum because I am burning my first CD's from Vegas 11 (Build 683) and have the same problems: the first track or at least several seconds, maybe the second track, will play, then all subsequent tracks would be
• Video

  3 answers, most recent on 4/21/2012

  Rendering Help!
  I have to render to these specs exactly: Format : MPEG-PS ???(PS?) File size : 5.99 GiB Duration : 24mn 18s Overall bit rate : 35.3 Mbps (may be lowered down
• Vegas Movie Studio (up to ver. 17)

  6 answers, most recent on 4/15/2012

  Rendering Troubles with Vegas Movie Studio
  I have a Canon Vixia HF R20 HD The camera is recording .mts file/AVCHD Setting @ Highest Quality 24 Mbps, Frame Rate 24 When rendering video in Vegas Movie Studio Platinum 9.0 to MP4 format the system freezes & sometimes post this error
• Video

  18 answers, most recent on 4/4/2012

  RE: OT: Sony enters the prosummer 4K space
  I remember speaking with a Panasonic engineer a few years ago and he was telling me that they were using pixel shifting technology to get 1080p because the expense of going with a true 1080p sensor was not justified because in the sub $10,000
• Audio

  No answers, created on 3/30/2012

  PC reboots when changing audio properties in b595
  Since the last update to Vegas Pro 11 b595/594, whenever I attempt change the sampling rate (currently set to 48Hz) in the audio properties tab and pressing either Apply or OK with cause the system to reboot, every time. This does not happen in
• Video

  10 answers, most recent on 4/10/2012

  RE: Need a script to rotate all events 90° CCV
  You can't use paste attributes if your source event contains any fX. Much more important, if you have keyframed any of the existing events, doing the copy/paste attributes will completely hose all your keyframes. I just created a script that will
• Video

  One answer, on 2/28/2012

  Exception error and crash when opening .VEG file
  I get the following error message Sony Vegas Pro 8.0 Version 8.0 (Build 144) Exception 0xC0000094 (integer divide by zero) IP:0x11CCC819 In Module 'mcmp4plug.dll' at Address 0x11BE0000 + 0xEC819 Thread: ProgMan ID=0x16E4
• Video

  12 answers, most recent on 2/23/2012

  RE: Rendering .MOV in Vegas Pro 9.0e (build1147)
  Hi Dave, I was able to render to MP4, so I'm not trying to create an MP4 file - I was able to do that. I only included that information to try to present everything one might need to advise me. The problem that I'm trying to solve is that I'm not
• Video

  12 answers, most recent on 2/23/2012

  Rendering .MOV in Vegas Pro 9.0e (build1147)
  My system is HP Pavilon DV6000 Laptop, Intel i5 2.67MHz 4Gb of ram. The Vegas project contains 13 MOV files and is 8:06 long with 11,655 frames The files are 1920x1080x24, 23.976fps and all but 2 are H.264. The other two are MPEG-4. Audio is
• Video

  11 answers, most recent on 2/23/2012

  RE: Constant Blue Screens
  Branan, Peter (Sony PCH) asked the right question. Where does the blue screen or the log tell you the fault occurred? At the top of the Blue Screen (Stop Error) there will be a message that tells you. Example. Terje said: Blue screens appear
• DVD Architect

  33 answers, most recent on 4/20/2012

  RE: Errors with DVD Architect- new guy needs help
  Great, sounds good. I'll go with the non 24p. Now, as I was playing around I found that when I try to put a .wav file on my menu to add some music , I'll get that error message and wont be able to burn a dvd. But strangely enough in the same DVD A
• Vegas Movie Studio (up to ver. 17)

  2 answers, most recent on 2/15/2012

  AVI 1280X720 and MP4 848X480 in same timeline???
  I have AVI 1280x720 24fps and MP4 848x480 120fps in the same timeline plus added MP3 music when I press Make Movie there is an error message then it shuts down VMS HD P 11 is this not possible if it is, what format / size do you render video in
• DVD Architect

  33 answers, most recent on 4/20/2012

  RE: Errors with DVD Architect- new guy needs help
  I still can’t make a (good) DVD on Architect! I rendered my movie as an MPEG-2, DVD Architect NTSC video stream file, then rendered the audio as a .wav file = The video quality came out like crap, very pixilated. But sadly enough this was the only
• DVD Architect

  8 answers, most recent on 2/9/2012

  RE: trouble burning
  Pete, I have tried this already because I read of people doing this. In Imgburn I get an error message: "Timeout on Logical unit" The burn that was good was thru DVDA. All I did then was change the media back to the Verb. 6x and then it started
• Video

  42 answers, most recent on 11/22/2020

  RE: Sony Full HD 3D Rendering - Is it possible?
  Yes, Sony makes “all inclusive” files with 2 video and one audio (5.1) streams. I mentioned a project with two separated view files only to show how tricky 3D work in Vegas is. I have 2 devices on which I can watch 3D video – 24 inch 3D monitor and
• Vegas Movie Studio (up to ver. 17)

  7 answers, most recent on 2/22/2012

  RE: Custom Render Settings to match original AVCHD
  Hi Joe, welcome to the club. I am using VMS10 for a year now and after a lot of readings I learned rendering problems are closed to be the same in VM10 and VMS11 (and even in previous releases). So you may wish to read the following which are my
• Video

  17 answers, most recent on 1/24/2012

  RE: Shortcut to restore event pan/crop settings
  Alert! Reviving a thread from the depths of time... In V8.0c and V10.0e, jetdv's script gives me this error. Anyone know if it can be updated? I want to restore/reset pan/crop for a bunch of selected events, but leave the fx on them.
• Video

  20 answers, most recent on 1/25/2012

  RE: Any improvements to Handbrake Audio?
  How do you get DNxHD to pass through surround? I keep getting errors when I try to render more than 2 audio tracks. I've tried various templates ie uncompressed, 32 bit float, 24 bit, etc. My project is 24 bit/48 kHz surround. rocky
• Video

  8 answers, most recent on 1/10/2012

  RE: Render Setting for 24 Mbps AVCHD to DVDA Blu-Ray
  The SCS AVC encoder appears not to adhere to the standard (see http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC#Levels). Sony's template defaults to Main Profile (MP). At level 4 this means that the bitrate is maxed to 20,000 kbps. However, Sony's AVC
• Vegas Movie Studio (up to ver. 17)

  2 answers, most recent on 12/28/2011

  Software Crashing
  In the middle of importing a .mpg file to my project media bin (in Vegas Movie Studio 9.0) an error occurs. The error reads as: Vegas Movie Studio 9.0 Version 9.0b (Build 66) Exception 0xC0000005 (access violation) READ:0x18701000 IP:0x24A017EA In
• Video

  22 answers, most recent on 12/25/2011

  RE: poor Videopreview despite big gpu
  I am using AVCHD files too (from i.e. Sony CX700 being 1080 50i or 50p at 24 Mbps or more.) My machine has about the same power as yours and I can easily preview even two 1080 50i tracks doing a 20 seconds crossfade at 100% full speed (25 Fps) at
• Video

  5 answers, most recent on 12/21/2011

  sot: nvidia drivers - beta update
  ok, so i went to 285.79 almost immediately i got 11 and it cured nearly all my problems - however, i do occasionally have 'blackout' - not me but the card*. these always restore with a message saying that the nvidia core driver suffered a critical
• Video

  8 answers, most recent on 1/10/2012

  RE: Render Setting for 24 Mbps AVCHD to DVDA Blu-Ray
  >Rob, the option is available to me in 511. John, I just re-checked and it is indeed there. I am not sure what I was looking at; perhaps the wrong template. My bad. In an case I took your advice and changed the "Encode Mode" to "Render using
• Video

  8 answers, most recent on 1/10/2012

  Render Setting for 24 Mbps AVCHD to DVDA Blu-Ray
  I have AVCHD content from my Canon HF G10 recorded in the MXP mode: 24 Mbps max bit rate, 1920x1080, 60i, Profile= High, Level 4 The content is less than 60 minutes Vegas Pro 11 does not a DVD Architect Blu-Ray render template that is an exact