• Video

  92 answers, most recent on 6/28/2011

  RE: YouTube, levels and monitors, a simple test.
  Firstly, brilliant tip on TakeColor. Thanks for that. Secondly, apologies if anyone's eardrums are ruptured. I know the audio is too loud. OK, so in the opening shot, the Sony Z1P shot the "black" water at level 23. If I knew then what I know now,
• Video

  8 answers, most recent on 6/29/2011

  RE: Problems Burning a Timeline to 3D Blu-ray Disc
  I have a very similar problem - I'm shooting with a mirror rig using two Sony HD camcorders. The project is at 25p and renders OK side by side at this rate. But when I render to 24p, I get the flickering you describe. I solved it by removing the S3D
• Video

  10 answers, most recent on 6/15/2011

  Rendering 60i to 24P, 8-bit, 32-bit
  I've been doing some trial and error, rendering some HD footage from my XR500V to 24P.....using both 8-bit and 32-bit floating point. Could be me, but I could see a difference with the 32-bit full range over the 8-bit in the shadow detail. Again,
• Video

  6 answers, most recent on 6/11/2011

  RE: Separate Drive For Video & Docs
  The main reason for putting the O/S and programs on one drive and all your data (including video) onto other drives is that it makes backup and recovery MUCH easier. On all my computers (I have close to a dozen) I use a partitioning program to
• Vegas Movie Studio (up to ver. 17)

  One answer, on 6/8/2011

  Crashed Files will not open
  I was importing an .mts file when Vegas crashed. Now the file crashes Vegas each time I attempt to import it. This has happened with one large and one small file. I have successfully imported files as large as 4GB. It seems that because Vegas
• Video

  45 answers, most recent on 6/27/2011

  RE: WOT: Keystone A-82 16mm Projector
  "Please refer to the johnmeyer post several posts up - he suggests the best way to elimate the flicker is to trial-and-error the framerate in the AviSynth script." OK, found what he said but the two frame rates he suggested are for 8mm and I'm
• Video

  45 answers, most recent on 6/27/2011

  RE: WOT: Keystone A-82 16mm Projector
  "The first issue I'd consider is what should the frame rate be?"Please refer to the johnmeyer post several posts up - he suggests the best way to elimate the flicker is to trial-and-error the framerate in the AviSynth script. I'd love to be able to
• Video

  167 answers, most recent on 3/9/2014

  RE: Interlaced HD to DVD AGAIN - some test renders
  Follow-up: The script errors out. Access Violation for Line 5 [TDeint (Mode =1)] Wouldn't work until I removed the MT and Distributor lines. In other words, until I used it exactly as Nick just posted. Estimated render time for the non-MT
• Video

  4 answers, most recent on 5/27/2011

  RE: 10d does not render AVC
  system info added. opened a new project and tried to render some clips from gh-1, nikon d3100, mini-dv (upscaling). All failed after about 24 rendered frames. Maximum number of rendered frames set to 1, 8, 16, same result. "An error occurred
• Video

  4 answers, most recent on 5/27/2011

  10d does not render AVC
  I have a project with 4 cameras (2 720p and 2 SD) and I was able to render mpeg2 SD. Now I'm trying to "render as" a loop to do some checks hd player. First try I selected Sony AVC, profile HDV720, use GPU if possible: rendering started and
• Video

  7 answers, most recent on 6/26/2012

  Sony AVC rendering: unknown error
  I' d like to render my projects with the Sony AVC rendering template at 26 Mbps, for it seems to conform to my camera's orginal format, that is the peculiar high quality h264 video that comes with Sony HDR-XR550 (HD FX mode 24 Mbps, 1920 50i), but
• Video

  2 answers, most recent on 5/24/2011

  Vegas 10 WMV levels read wrongly (V9 fine)
  As one would expect, as in earlier versions of Vegas, WMV files are rendered over the (approximately) full (0..255) levels-range by Vegas 10. However Vegas 10 (only) reads/interprets WMV files as only over the range 16..235, hence producing a
• Video

  3 answers, most recent on 5/16/2011

  Program keeps crashing as soon as I click "render"
  This problem has only started happening from yesterday 15 May 2011. Everything works perfectly in the program, but as soon as I want to render something in Vegas Pro 9.0e, it crashes immediately with the following error: Problem Description
• Video

  13 answers, most recent on 5/8/2011

  RE: iso render failure in 10d
  Checked the display sys info box. Didn't know about that until scolded for not doing it. As far as images, the links method is useful for stuff posted elsewhere and I'll use that; for throwaways like a screen shot of an error message I'll have to
• Video

  13 answers, most recent on 5/8/2011

  RE: iso render failure in 10d
  Win7 64 with Vegas 10d 64, on i7 860, 8GB RAM. BIG UPDATE: Using the 720 60p 3D blu-ray template was successful in rendering an iso file. Saved to the same folder as the first, failed effort. You are right, I should not complain, just focus on the
• Video

  13 answers, most recent on 5/8/2011

  iso render failure in 10d
  I rendered a 3D Blu-Ray disc image with 10d, all seemed to be going well until the very end when I got only an error message for the long wait. There was no iso file. "An error occurred preparing the image. Filename: Status: Failed to connect to an
• DVD Architect

  12 answers, most recent on 11/25/2011

  x264 interlaced encodes muxer error, progr. ok.
  Since its version r1538 on 25.April 2010 the freeware H.264 encoder x264 has reached Blu-ray compatibility. The compatibility has been checked on different muxers like Scenarist and different verifiers like Panasonic Blu-ray verifier and Sony BD-ROM
• Video

  No answers, created on 4/22/2011

  Using NX5U footage in Vegas 8.0c build 260
  I just made a discovery that may be of interest to some other forum members. I recently purchased a Sony HXR-NX5U camera. I shot some test scenes using the following settings: 1) 1920x1080@30p, 24 Mbps (AVCHD), audio - 16-bit, 48 KHz PCM 2)
• DVD Architect

  2 answers, most recent on 4/5/2011

  Can't install pro 5.2
  Hi, I can't install DVD architect PRO 5.2 And the end of installation I get this error : Error: 1603 occured during installation System : Motherboard : Asus P6X58D-E Processor : Intel Core™ i7 Quad Processor i7-950 RAM : Corsair XMS3 DDR3
• Audio

  22 answers, most recent on 4/4/2011

  RE: VEGAS PRO 10c CRASHES WHEN ADDING AUDIO FX's
  Here are a few links to people having the same problem and his crash report seems identical to my first one: http://forums.creativecow.net/thread/24/917816 As you will see, the guy did a clean install of his operating system and the problems
• Video

  15 answers, most recent on 3/25/2011

  Vegas Pro Can't handle a render job!
  Seems like Vegas can't handle a render job. Failed twice after 6+ hour attempts? It is a nested project and when I open the master project it says error cannot open some video streams but when I play the project on the time line everything seems
• Video

  20 answers, most recent on 3/10/2011

  RE: Mpeg 2 rendering
  Some of the advice given in this thread may be misleading, so I thought I should clear up a few things. 1. You should always encode in Vegas and not in DVD Architect. As already stated, this lets you use 2-pass encoding for long projects (over the
• Video

  45 answers, most recent on 3/3/2011

  RE: Sticky - My apologies to you and the staff at Sony
  deusx.... let's make sure we are comparing apples to apples : firstly, are you also on Windows 7 Professional, 64 bit ? I installed Service Pack 1 just this morning to see if it would solve any of these issues. Secondly, are you also running Vegas
• DVD Architect

  18 answers, most recent on 3/5/2021

  RE: DVDA Hangs After Import of 55% of AVC Assets
  Just wanted to update everyone on my progress, or lack of progress on this. It's been about 9 days since Sony last responded to my trouble ticket. I decided to try rerendering my videos to the Sony AVCHD codec in VP9 this time even though Sony's