Search the VEGAS Community for tutorials, questions and solutions as well as for forum members

Sony have admitted there is a problem with this-here is their statement: "Response (Elizabeth L.) 01/24/2011 08:22 AM Hi colin, Thank you for writing back. I have checked our bug database and confirmed this as a bug in this version of the

Video

9 answers, most recent on 1/12/2011

Vegas 10 trouble with AVI files

I recently upgraded from Vegas Pro8 to 10 and installed the latest version c and build. I cannot open AVI files I previously rendered in Vegas 8 on an XP computer. They were 1280 x 720p and all played back fine on the older software and machine.

Video

20 answers, most recent on 1/5/2011

RE: 10c is out

Jerry, The error I had was quite different as show in my post. In the project I had mixed DSLR 1920x1080 24p and HDV (1440x1080 60i) footage, project was set to the properties of the DSLR (dominant) clips. Was rendering to the standard SONY AVC

Vegas Movie Studio (up to ver. 17)

3 answers, most recent on 1/17/2011

vegas crashes on video import

Trying to use Vegas Movie Studio Platinum 9.0b... On attempting to import *.mp4 video files into the project media the program crashes and gives the error below. I'm running vista 64bit which is 'supported' but I am not having any luck so far.

Video

62 answers, most recent on 12/17/2010

RE: Honestly, what will I gain going 64bit 8gbRAM?

In general, in the long run, a 64 bit system has the potential to do everything faster than a 32 bit system simply because it has the ability to process twice as many bits per cycle. However, the practical side is that almost all video and audio

Video

2 answers, most recent on 12/17/2010

S3D Flickering in Side-by-Side and Over-Under Mode

Been doing some testing of the S3D output of Vegas10 from the timeline. I'm using source material that is 1920x1080 24p (23.976). I've been outputting in both Side-by-Side and Over-Under modes in both half and full resolutions direct from the

Vegas Movie Studio (up to ver. 17)

9 answers, most recent on 12/14/2010

Error Help

I am getting this error following the capture of video in Movie Studio 9. The video captures fine, but as soon as it says it is a success, I get the below and it shuts down, and never adds it to my media so i can't use it.... Please help!!! Sony

DVD Architect

No answers, created on 12/12/2010

Preparing Blue Ray DVD Architect Studio 5 crashes

I am trying to prepare a Blue Ray disk but DVD Architect Studio 5 keeps crashing when it is 99% done rendering the audio (the video consists of 6 parts, 1 intro + 5 parts). Total file size: 29.1GB = 59% used. I get the following error

Video

14 answers, most recent on 12/4/2010

An error occured

Hi, I have been having an error pop up every time I try to load my project that says an exception occurred, and gives these details: Sony Vegas Pro 8.0 Version 8.0 (Build 144) Exception 0xC0000094 (integer divide by zero) IP:0x33A8C819 In Module

Video

12 answers, most recent on 11/30/2010

RE: "Project markers" to DVDA, after the render...

I re-did the script because many of the setup variables need to be changed under certain circumstances. However, here is the original script (which I did not write). John Meyer/** Objective: ========== Script to generate *.sfl file from Vegas

Video

3 answers, most recent on 11/11/2010

RE: No smart rendering with Vegas 10a/64 ?

Yes lower on both and everything else match - doesn´t matter. So - is there no smart rendering SD with Vegas 10? Is it a bug? It certainly is prohibiting my usual workflow with big projects. I use to smartrender just the video and do the final

Video

18 answers, most recent on 10/27/2010

RE: Vegas 64 bit still a speed demon (that crashes).

1) Test your RAM thoroughly. The most obvious difference between the 32 and 64 bit version of Vegas is the amount of RAM you are using. That you find the 64bit version faster indicates to me that you're using a lot of it. I ran the Windows Memory

Vegas Movie Studio (up to ver. 17)

2 answers, most recent on 10/6/2010

RE: Render to Sony AVC always stops at 4,194,444 KB

Hi Eugenia, thanks for your help. =) I'm using VMS 9 Platinum, which doesn't have the customizable MainConcept AVC codec. So, I tried to lower my bit rate to 8 mpbs in Sony AVC (720p 23.976). The render did complete without error resulting in a

CD Architect

6 answers, most recent on 4/21/2014

Windows 7 64-bit crash... any ideas?

Good day, I've been getting random crashes using CD Architect 5.2d. The error happens when I begin to burn a disc after the "burning lead-in" finishes. I've also burned using other brand of CD's from Verbatim (Moser Baer) with no problems. I

DVD Architect

One answer, on 8/23/2010

Error at end of preparation for BD

Maybe this has been discussed before, but I get this error message at the end of BD prepare rendering: "File name: STREAM/00003.m2ts Status: TSWrapper.dll::CTSWrapper::ProcThreadMain::Failed to read ES file. - The ES file may be shorter than the

Vegas Movie Studio (up to ver. 17)

No answers, created on 8/22/2010

Vegas shutting down due to error

Hey everyone, I've done a great deal of video work and editing on some stuff for work but just recently I've been getting a serious error that completely shuts down vegas. Sometimes Vegas doesn't even open my project but comes up with the

Vegas Movie Studio (up to ver. 17)

12 answers, most recent on 8/13/2010

RE: VMS 10: Low memory error while rendering

The CFFExplorer fix did not fixed the problem with the .mov files and random black clips from those .mov files but it SEEMS to fix the low memory error while rendering. Just rendered 4minutes of highly edited(transition, frame overlay, etc) 1080p

Vegas Movie Studio (up to ver. 17)

11 answers, most recent on 8/6/2010

RE: CFF Coding for Vegas Movie Studio 10

I just did the CFFExplorer fix for VMS 10 even though I am not sure it is needed. So far so good. I was able to render 4 minutes of 1080p 24Mbits/sec that I shot with my Canon Vixia HFS 10 to 1080p .wmv, 1080p .mp4. 1080p .avc(1920x1080i bluray at

CD Architect

7 answers, most recent on 8/9/2010

CD Text burning error

I'm using CDA 5.2d and when I try to burn a CD with CD Text, I get: 'SFMMCX'-(17) ''-(0) -'PHILIPS DVD+-RW DVD8701 5D24'-(0) Module sfmmcx.cpp Line 2151 An illegal request was received. The data in the track is not compatible with the current

Vegas Movie Studio (up to ver. 17)

12 answers, most recent on 8/13/2010

VMS 10: Low memory error while rendering

I get "The system is low on memory. You may be able to reduce memory usage by closing other application." My system spec is as follow: Windows 7 Home Premium 64 bit AMD Phenom II X4 945 3.0 GHZ Installed Physical Memory :8GB Total Physical

Video

11 answers, most recent on 8/1/2010

Rendering to a 10bit intermediate

I've just wanted to experiment a little with using 10bit intermediate for heavy CC-ing and grading, in order to compare results with those of using the 8 bit mxf files (either 4:2:0 from my EX1, or 4:2:2 from my nanoFlash). So, I downloaded both

Vegas Movie Studio (up to ver. 17)

7 answers, most recent on 7/28/2010

RE: Import issues - error messages

Thanks for your good suggestions musicvid! I have tried to import the same footage into a new project and get the same error messages. Although it errors on different footage, so there seems to be no specific corrupt file, but maybe the whole files

Scripting

25 answers, most recent on 12/25/2018

RE: Playback rate (30fps to 29.97) change script.

JR, when I run your script I get the following error message: An error occurred during execution of the script c:\Program Files\Sony\Vegas Pro 9.0\Script menu\30 to 29.97.js or the long version: C:\Program Files\Sony\Vegas Pro 9.0\Script Menu\30

Video

11 answers, most recent on 7/27/2010

RE: RoundTripping to/from FCP: DNxHD rejected by FCP

Tried DNxHD setting 32 bpp instead of 24 bpp but no difference. Dragged into FCP timeline, despite "Codec not found" error. It displays the audio waveform but will not play or do anything, even of video stream deleted. Preview shows red. Tried