• Video

  12 answers, most recent on 12/12/2007

  Pro 8.0 crashes on project
  Hi Guys, nice forum, I'm reading already a while here to find some answers. I hope I can find an answer in regard to my problem. I'm running Vegas 8.0a Pro on a new machine, the project will contain SD (in 16:9 from a Sony Camera captured with
• Vegas Movie Studio (up to ver. 17)

  2 answers, most recent on 11/4/2007

  VMS Platinum 8.0b full of bugs
  Recreated my Drag Week from scratch and put only the first days worth of video together. Plays just fine from the timeline but when I try to Burn to DVD I get this: I may have to go back a version or two.... Sony Vegas Movie Studio Platinum
• Video

  34 answers, most recent on 1/2/2008

  RE: BlackMagic Decklink, Intensity, and Vegas 8
  Have now tried to get Decklink working on a standard 'XP' machine.(another 3 hours spent.... my previous post was for XP_x64)) Running XP Pro (32bit) on a Xenon Nitro Dual Xeon 3.4. (this is a qualified machine on BMD's website) Have massively fast
• Video

  4 answers, most recent on 10/20/2007

  Please check Trimmer : Possible bug
  Please, try that : >Open video file in Trimmer >Right clic ruler and switch to “Use Project Frame Rate” >Right clik again ruler and try to switch back to “Use Media Frame Rate”… Vegas does NOT want to switch back and sometime I get a
• Video

  9 answers, most recent on 10/2/2007

  RE: 0xC0000005 EXCEPTION ERROR!!! PLEASE HELP!!!
  I'm using Quicktime 7.2, and I still get the application error. I can easily reproduce the error, all I have to do is exit Vegas 8.0 and I get the application error, (0xc0000005). That's too bad for us that it is a generic error message. Maybe
• Vegas Movie Studio (up to ver. 17)

  4 answers, most recent on 10/4/2007

  RE: VMS 8.0b dies a horrible death...
  Applications that attempt to violate DEP will receive an exception with status code STATUS_ACCESS_VIOLATION (0xC0000005). If an application requires executable memory, it must explicitly set this attribute on the appropriate memory by specifying
• Vegas Movie Studio (up to ver. 17)

  4 answers, most recent on 10/4/2007

  RE: VMS 8.0b dies a horrible death...
  And here is the horrible msg: An error occurred during the current operation. An Exception has occurred. Sony Vegas Movie Studio Platinum 8.0 Version 8.0b (Build 122) Exception 0xC0000005 (access violation) READ:0x8 IP:0x738DE8 In Module
• Video

  9 answers, most recent on 10/2/2007

  RE: 0xC0000005 EXCEPTION ERROR!!! PLEASE HELP!!!
  A 0xC0000005 error (access violation) is very generic, so if you submitted a problem report saying only that you got that error and you didn't provide detailed steps that would allow anybody else to reproduce the error then the chances that you will
• Video

  9 answers, most recent on 10/2/2007

  RE: 0xC0000005 EXCEPTION ERROR!!! PLEASE HELP!!!
  I get the same application error (exception 0xc0000005), however my error happens when trying to render a job. tried rendering to mpg, and avi. It will go for a while then stops with this error and same exception. Running Vista 32 bit. I think it
• Video

  9 answers, most recent on 10/2/2007

  RE: 0xC0000005 EXCEPTION ERROR!!! PLEASE HELP!!!
  I get the same application error (exception 0xc0000005), but I only get it when I exit Vegas Pro 8.0. I can open my Vegas 7.0 and I don't get an application error when I close the program, but I can then open Vegas 8.0 and close the application
• Video

  9 answers, most recent on 10/2/2007

  0xC0000005 EXCEPTION ERROR!!! PLEASE HELP!!!
  Hello, This exception error 0xC0000005 is really frustrating. I bought the new vegas 8 pro and when i load up a previous file which was created with vegas 6 it comes up with the 0xC0000005 exception error. i have already uninstalled and
• Audio

  24 answers, most recent on 9/27/2007

  RE: waves crash in vv7
  Hey Peter, according to Wave website I am using the latest versions. And I had gone a few days without incident, but this morning tried to open a previous project and got the crash error below. Any suggestion you can offer is
• Video

  8 answers, most recent on 9/20/2007

  Vegas 8.0 & Boris RED plug in
  1. I recently upgraded to Vegas 8,0 and now my Boris RED plugin doesn't show up in my Transitions and Video FX menus. It still appears correctly in Vegas 7.0, but I can't get it to show up in Vegas. 8.0. 2. Also, when I exit Vegas 8.0, I always
• Vegas Movie Studio (up to ver. 17)

  8 answers, most recent on 9/16/2007

  platinum 7 crashing
  I am receiving the following error when editing a project: Exception 0xC0000005 (access violation) READ:0x44C IP:0x66964E In Module 'VegasMovieStudioPE70.exe' at Address 0x400000 + 0x26964E Thread: VideoRender ID=0xB88
• DVD Architect

  6 answers, most recent on 8/23/2007

  RE: Exception Error/Unable to Assign Links
  The exception may or may not be related to a bug Sony mentioned in this thread. If so, uninstalling and re-installing DVD Architect might do the trick. That was 4.0a, though, and I'd assume they'd fixed it in 4.0b. Like most exceptions, though,
• DVD Architect

  6 answers, most recent on 8/23/2007

  Exception Error/Unable to Assign Links
  I'm having two problems right now; perhaps they are related. I recently installed DVDA 4.0b, thinking it would correct the problems I was having with version 3, but it hasn't: I keep getting error messages at varying times when working within the
• DVD Architect

  3 answers, most recent on 8/10/2007

  DVD Architect Error message
  I have a strange error message when trying to burn a DVD with the Make DVD function. I installed the Sony Blu-Ray recorder a while back, burned a few BD-DVD's and I am wordering why all of the sudden this error. with DVD-A. Can anyone help, this
• Video

  2 answers, most recent on 8/6/2007

  Red Screen & Crash
  Help! This first occurred in 7.0d, so I updated and it still happens in 7.0e. This happens when the project is opened. Sony Vegas 7.0 Version 7.0e (Build 216) Exception 0xC0000005 (access violation) READ:0x0 IP:0x68F208 In Module 'vegas70.exe'
• Video

  2 answers, most recent on 7/11/2007

  Vegas crashing accessing any media
  I had to uninstall and reinstall Vegas due to some driver issues. Now, whenever I try to access media via the Explorer window or drag some media from somewhere (CD mpeg2 in most recent case) to the Project Media I get an "An error occurred during
• Video

  8 answers, most recent on 7/5/2007

  .mov files no longer work in 7.0e
  I've been running Vegas 7.0e for some time without difficulty, however, this morning when trying to place a .mov file on the timeline I got the following error: "An error occurred during the current operation" An Exception has occurred. -- Sony
• Video

  No answers, created on 7/1/2007

  I'm now having Quicktime issues too...
  Using 7.0e. I am using some QT Jumpback elements. I now get the following error... (I reinstalled QT with an updated version, gives me one good projects open...then after a little bit, I get the error again. Never, ever had this happen util
• Video

  2 answers, most recent on 6/25/2007

  Cannot import .MOV
  I just got back from a roadtrip and am trying to make a video of everything I recorded All the files are .MOV format and everytime I try to import them I ge this error message: Sony Vegas Movie Studio Platinum 7.0 Version 7.0a (Build 52) Exception
• Video

  No answers, created on 5/31/2007

  Quicktime MP4 Error
  As soon as I drop a MP4 clip from my Exacti on the time line I get the error below. This used to work fine. Sony Vegas 7.0 Version 7.0d (Build 192) Exception 0xC0000005 (access violation) READ:0xC IP:0xC5F9BD7 In Module 'QuickTime.qts' at Address
• Vegas Movie Studio (up to ver. 17)

  One answer, on 3/29/2007

  Vegas MS 6.0b crashes when working with MP4
  I have Vegas MS Platinum v6.0b. Everytime I try to use an MPEG-4 file the program gives me and error message and shuts down. I'm also running Vista. The first few lines of the error message is as follows: Sony Vegas Movie Studio Platinum