• Video

  7 answers, most recent on 12/26/2017

  Vegas Crashing despite efforts to stop crashing.
  Hello everyone. This is my first post so bear with me. Prior to this point, Vegas Pro has been running fine. No errors whatsoever, no crashes until this point where I have tried at least five times today to render some minute long video...it keeps
• Video

  133 answers, most recent on 2/23/2018

  RE: VEGAS Pro 15 Update 2 (build 261) - General Discussion
  Please fix long-standing mistakes that keep me constantly: ERROR WITH AUTO RIPPLE - ONLY VEGAS /12/13/14/15 (V11 is
• Vegas Movie Studio (up to ver. 17)

  11 answers, most recent on 8/16/2019

  RE: Anyone editing Virb 360 video in MS 14 - can't open mp4 files ?
  I downloaded the mp4 file. It plays fine outside of VMS 14 (148). I cannot drag it to the timeline (no error message). When I try using 'add media', I get the 'number of channels is not supported'. I also need to correct my earlier post - you do
• Vegas Movie Studio (up to ver. 17)

  11 answers, most recent on 8/16/2019

  RE: Anyone editing Virb 360 video in MS 14 - can't open mp4 files ?
  Sorry, I realised after posting that details would be needed, so was going to look at this today - below is the mediainfo for a mp4 file from the camera. If I try to drag this into timeline in MS14 it just shows no entry sign, and I cannot select
• Vegas Movie Studio (up to ver. 17)

  11 answers, most recent on 8/16/2019

  Anyone editing Virb 360 video in MS 14 - can't open mp4 files ?
  I just got Garmin Virb 360 camera today and was hoping I could edit in Movie Studio 14 and then insert metadata for 360° playback and upload to youtube. Virb 360 Video files are 3840x2160 stereospacial video in mp4 file, but I cannot even open the
• Vegas Movie Studio (up to ver. 17)

  9 answers, most recent on 12/14/2017

  Movie Studio 14.0 can not get any video into the software???
  I am new to this and just can not figure out how to add my go pro footage into the video editing software. I get the error: Warning: An error Occurred while opening one or more files. The file is an unsupported format These files are MP4 which is on
• Vegas Movie Studio (up to ver. 17)

  10 answers, most recent on 7/5/2018

  RE: Vegas Movie Studio 14 Platinum will not install
  I have the same issue. I spent $40 for the upgrade. I'm not happy. My Windows 7 computer crashed a few months ago. I bought a new computer with Windows 10. Fast with lots of memory and 3 SSDs. I tried installing Movie Studio 13 and got the above
• Video

  105 answers, most recent on 5/26/2018

  RE: New Purchase, can't find HEVC Quicksync encoder option
  @Nick Hope My LG UHD Monitor is connected to the mainboard intel graphic running Win10 pro 1703 using an i7-6700k with AMD R7 250 . Vp13 B453, Vp14 B270, Vp15 B216. The properties for the HD530 driver in the device manager shows :
• Video

  4 answers, most recent on 11/17/2017

  RE: Troubleshooting a vegas crash - what log files should I be reviewing?
  ken-dehoff Your fix to get QSV working for HEVC is unfortunately the opposite of one of the things chaz-warkulwiz had to do to get rendering working. It seems for the moment you can have either quick HEVC rendering, or complete HEVC rendering, but
• Audio

  207 answers, most recent on 8/26/2021

  RE: AC3 pro render missing in VP14
  Hi. Not to be a "prophet of doom" or anything like that but I'd be very careful relying on these fixes / patches to enable Dolby Pro in VP15 and onwards i.e. it would not surprise me in the least if Magix codes some type of block into future
• Vegas Movie Studio (up to ver. 17)

  One answer, on 11/14/2017

  RE: Trim Event cursor no margin for error in new Platinum 14. Setting?
  Have you tried to use the Split Trim Tool or Trim Start/Trim End? I haven't found a way to change the "margin for errors" with the small trim/fade handles which were brought back with MVMSP 14. As for the large blue Trim and Fade handles in SMSP
• Video

  105 answers, most recent on 5/26/2018

  RE: New Purchase, can't find HEVC Quicksync encoder option
  Hi hgala I have a Kaby Lake processor but get the error others have reported when trying to render 10-bit HEVC, can you confirm if you have replicated this and when the fix might
• Vegas Movie Studio (up to ver. 17)

  One answer, on 11/14/2017

  Trim Event cursor no margin for error in new Platinum 14. Setting?
  Hey all, Upgraded from Movie Studio Platinum 13 to 14. In v13, the trim event cursor (also, fade and compress cursors) had a wide margin for error from the start or end of the clip. In v14, you need to have the cursor right on the edge of the clip,
• Vegas Movie Studio (up to ver. 17)

  10 answers, most recent on 7/5/2018

  RE: Vegas Movie Studio 14 Platinum will not install
  Error 2147163964, error 1317 while attempting to create App Data file. CURE : locate C\users\AppData\roaming\Magix file and uncheck Read only box now successfully installs MVSP14. PHEW! Sadly I tried what you suggested and I still got the same
• Vegas Movie Studio (up to ver. 17)

  10 answers, most recent on 7/5/2018

  RE: Vegas Movie Studio 14 Platinum will not install
  Error 2147163964, error 1317 while attempting to create App Data file. CURE : locate C\users\AppData\roaming\Magix file and uncheck Read only box now successfully installs MVSP14. PHEW!
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 11/8/2017

  RE: MVS 14: 4K UHD Vegas stabilizer crashs
  I can confirm this bug. It happens not with every UHD clip, but always with the same UHD clips, so it's not a random error. My opinion, the stabilizer in VMS14, based on Mercalli2, was developed before UHD exists and is not UHD capable. I get also
• Video

  5 answers, most recent on 11/9/2017

  RE: Every time I open vegas i'm prompted to enter my serial number
  You are not alone, V15 and V14 both give errorcode -59 and do not even allow me to enter a serial. A restore of the latest system image attempted, no difference. My impression is that it is an error on the authorisation server. A full day wasted, no
• Video

  9 answers, most recent on 11/12/2017

  RE: error code: -59, panic panic panic
  Thank you Set, it is Win7 updated as far as windows update will take it, something that may have been an error as everything worked fine for the year it was prohibited from updating anything, antivirus is avasts pay version. I have been wondering
• Video

  17 answers, most recent on 11/7/2017

  RE: Vegas 14 license crash
  Gary Rebholz opened a ticket for me on October 2th. Below are the email exchanges that followed. For those who want a summary basically Support asked me to install Vegas in the hidden admin account without fully explaining why or answering my
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 11/8/2017

  RE: MVS 14: 4K UHD Vegas stabilizer crashs
  I can confirm this bug. It happens not with every UHD clip, but always with the same UHD clips, so it's not a random error. My opinion, the stabilizer in VMS14, based on Mercalli2, was developed before UHD exists and is not UHD capable. I get also
• Video

  5 answers, most recent on 11/9/2017

  RE: Every time I open vegas i'm prompted to enter my serial number
  You are not alone, V15 and V14 both give errorcode -59 and do not even allow me to enter a serial. A restore of the latest system image attempted, no difference. My impression is that it is an error on the authorisation server. A full day wasted, no
• Video

  156 answers, most recent on 4/11/2020

  RE: A ringing endorsement of VP15
  Hi, OldSmoke, I think your test would be more valid if you took the computer back in time. So here are my tests. VP14 build 270 was installed on 9/25/17 on my machine. 1.) Disconnect PC from the internet, change year to 2016 Result: project opened
• Video

  156 answers, most recent on 4/11/2020

  RE: A ringing endorsement of VP15
  Hi, OldSmoke, I think your test would be more valid if you took the computer back in time. I've done that (by restoring old images) and I have had the error messages followed by Vegas disappearing. In this state Vegas will allow the user to work on
• Vegas Movie Studio (up to ver. 17)

  No answers, created on 11/2/2017

  Deleted Boris, now cannot start Movie Studio
  Using Movie Studio 14-148 on Windows 10. I had Boris BCC8 on my computer from MovieStudio 13. I am now using MS14 and it was listing all the outdated transitions, etc. from BCC8, so I uninstalled BCC8 which had never been activated since it was