I have a project that requires a DVD+R DL 8.5GB disc.
The issue is burning the project: Either I will go to BURN > Previously prepared folder (or current project) > and then select the correct burning options for my drive (disc info at bottom) > and then select between my 2 layer break offset options the program gives me (sometimes it asks if I want to do this automatically or choose if it must be within a title, and it always is for this project) and then I click "Finish." Now one of 2 things will happen: either it will burn flawlessly or spin/warm up and then count up the estimated time left at about 40+ seconds per second (at 0%) and the total elapsed time goes to about 10-15 minutes and give me the error below. The odd thing is that I can reboot and try again and sometimes it will burn flawlessly with the same disc that gave the error. It does this for every disc I've put in, either it's a perfect burn or I get this error and reboot and sometimes it takes 2 reboots but it burns perfectly after that. History of my drive is that it's a USB3 LG BE14NU40 (firmware 1.01) and I've only had 1 bad write/bad disc EVER in the many years I've had it.
Note that "C:\jenkins\..." is not a directory on my PC nor ever has been - it must be in the DVDA program files.
----------------------------------------------------
'SFMMCX'-(17)
''-(0)
-'HL-DT-ST BD-RE BE14NU40 1.01'-(0)
Module c:\jenkins\workspace\dvdarch7\sonic3\release\dvdarchitect\7.0\cddrvs\sfcd\sfmmcx.cpp Line 2187
A medium error occurred.
The PCA is full. The disc is not blank.
Status: 00020202
Command: 2a 00 00 00 00 00 00 00 20 00
Sense: 03 73 02
Info: 00 00 00 00
Specific: 00 00 00
Extra: 00 00 00 00 00 00 00 00 00 00
----------------------------------------------------
Disc info from imgburn: Brand "Optical Quantum"
HL-DT-ST BD-RE BE14NU40 1.01 (USB)
Current Profile: DVD+R DL
Disc Information:
Status: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Supported Write Speeds: 4x, 8x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes
Physical Format Information (ADIP):
Disc ID: CMC MAG-D03-64
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (Last Recorded):
Disc ID: CMC MAG-D03-64
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 8,310 KB/s (6x) - WS: 5,540 KB/s (4x)
Descriptor 2...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4173823 (0x003FAFFF)
-> RS: 8,310 KB/s (6x) - WS: 11,080 KB/s (8x)
------------------------------------------------------------------
Any ideas?