Error Code

TONY2000 wrote on 7/23/2003, 12:27 PM

I have been successfully using DVD Architect for a month, but am now getting the following error code
unknown error(8004e002h)
SFMMCX'-(17)
'atapi'-(1)
-'PIONEER DVD-RW DVR-105 1.21'-(1)
Module mmc.cpp Line 861

Status: 00000000
Command:
Sense: 00 00 00
Info: 00 00 00 00
Specific: 00 00 00
Extra:
This is at the final burning stage

Comments

jetdv wrote on 7/23/2003, 12:55 PM

What software did you install?

TONY2000 wrote on 7/23/2003, 4:21 PM

I re-installed on a clean machine. Still the same problem.

jetdv wrote on 7/23/2003, 4:25 PM

Do a search for SFMMCX

TONY2000 wrote on 7/24/2003, 2:10 PM

I have searched but I cant find it ?!

Maxter wrote on 7/27/2003, 11:28 PM

Is there any significance to SFMMCX ?????

Im having errors and no solution in sight.

I searched for SFMMCX and found nothing too

jetdv wrote on 7/28/2003, 8:40 AM

OK, I did the search (36 entries found). It seems this was a bug in a previous version. Are you running 1.0c? If not, update to 1.0c and see if the problem still occurs.

vinnyskinny wrote on 7/28/2003, 5:12 PM

I actually had the same error. It was caused by the recompression of the files surpassing 4.7 gig. I tried optimizing it to around 95% instead of 99 or 98 and it worked fine. Kinda buggy!

V

Mandy wrote on 7/28/2003, 10:22 PM

Thats funny

I search "all files and folders" for "SFMMCX" and get nothing.

This DVD project is not even a gig so I should be OK there.

No solution in sight

SonyBP wrote on 7/29/2003, 11:52 AM

You should update the drive to the latest firmware available. According to Pioneer's site, the latest is 1.33, whereas you have 1.21. You can download the update from this page.

If you are still having problems, please contact Technical Support directly through the form located here.

HTH,
Brian

Mandy wrote on 7/29/2003, 10:00 PM

Hi Brain

I have no drive connected and i am getting

0x8004e000

when trying to preview

TONY2000 wrote on 7/30/2003, 2:21 PM

I now have a fully working (fingers crossed) programe. I have updated to 1c and the latest firmware. Which one was responsible I know not, but thank you...