No. But there is a work around that is terrific. As mentioned in
the other thread. Worked like a charm. I have the same drive.
(below is what was sent by tech to me. and it worked!)
=======
If you Drive is not on the Supported Device List, you may not
be able to use that specific drive with CD-Architect at this time.
There is one work around to see if you drive will work as a generic
type. Go into CD-Architect and choose Options/Select Drive. This
will bring up a Select Drive Window in which you should
select "Advanced". In the Advanced Drive Selection window, choose
ATAPI MMC Compatible drive (if you have an IDE Drive, or SCSI MMC
Compatible (if you have a SCSI Drive). Next, pull down the menu for
SCSI Host and select the first option, usually 0.xxxxxx, and repeat
for SCSI CD-R. If you drive is not listed on the SCSI CD-R Menu,
repeat the previous step, only this time, choosing in the SCSI Host
many - 1.xxxxxxx.
Once you have located your CD-Drive, click "OK" and then it
should be listed in the bottom left corner of the CD-A window. The
final step would be to see if you are able to write a CD.
=====
PS: it works!

Eventide Music wrote:
>>Hi! Can anyone tell me if CD Architect 4.0g supports the
>>Plextor 12-4-32 writer?
>>
>>Many thanks!
>>
>>Kevin Kendle