The IRQ problem/solution has greatly improved my print-to-tape without dropouts. But I'll still get a few dropouts here and there. I'm too anal to let that go. So I started experimenting with punching in to re-record right when the dropout occurs. This means I need to punch in at a specific frame.
With my TRV900, if I set the tape at position X, it starts recording at position X - 2 frames. Seems consistent. I have not yet checked to see if there are any skipped or duplicate frames. I'll do that next.
I'm wondering if anyone has covered this ground before. I'm having a hard time finding anything on the subject. I'd also like a little more explanation about the settings in the print-to-tape preferences. TIA.
With my TRV900, if I set the tape at position X, it starts recording at position X - 2 frames. Seems consistent. I have not yet checked to see if there are any skipped or duplicate frames. I'll do that next.
I'm wondering if anyone has covered this ground before. I'm having a hard time finding anything on the subject. I'd also like a little more explanation about the settings in the print-to-tape preferences. TIA.