Sorry if it is known, but did not find it.
When trying to render to WMV, 8 or 9 file I was getting the following error, in the same place every time. (Part of full list)
Sony Vegas 4.0
Version 4.0e (Build 239)
Exception 0xC0000005 (access violation) READ:0x254D638 IP:0x1C111E0
In Module 'sftrans1.dll' at Address 0x1B20000 + 0xF11E0
Thread: Engine_RenderFromCookedSlices ID=0x42C Stack=0x244D000-0x2450000
Registers:
EAX=0003ffff CS=001b EIP=01c111e0 EFLGS=00010206
EBX=0003ffff SS=0023 ESP=0244d42c EBP=0244d4f0
ECX=00000001 DS=0023 ESI=0254d638 FS=003b
EDX=00000001 ES=0023 EDI=0254d638 GS=0000
Took some time to track it to a still on the timeline, in fact the clip before the actual one as the error popped up, the last rendered frame was shown, which in fact not from the one causing the problem.
The clips where stills from a digital camera in 1152 x 864 x 24 JPEG
The cause of the error is having the BORDER function in BLURRED mode in the clip, with this setting “Size 0.04614”, “Type Blurred” , the Soft edge option seemed to work on the clip but then the in would crash when going to the next clip.
When this filter was removed the error was removed and appeared on the next clip with the border function added. If I used the Bezel or Border option in border it is fine.
This error was repeatable and was then predictable.
I did add the Cookie Cutter to try and get some form of border, but for some reason the picture shrank during the render process.
Perhaps some one could try and reproduce the fault at their end.
When trying to render to WMV, 8 or 9 file I was getting the following error, in the same place every time. (Part of full list)
Sony Vegas 4.0
Version 4.0e (Build 239)
Exception 0xC0000005 (access violation) READ:0x254D638 IP:0x1C111E0
In Module 'sftrans1.dll' at Address 0x1B20000 + 0xF11E0
Thread: Engine_RenderFromCookedSlices ID=0x42C Stack=0x244D000-0x2450000
Registers:
EAX=0003ffff CS=001b EIP=01c111e0 EFLGS=00010206
EBX=0003ffff SS=0023 ESP=0244d42c EBP=0244d4f0
ECX=00000001 DS=0023 ESI=0254d638 FS=003b
EDX=00000001 ES=0023 EDI=0254d638 GS=0000
Took some time to track it to a still on the timeline, in fact the clip before the actual one as the error popped up, the last rendered frame was shown, which in fact not from the one causing the problem.
The clips where stills from a digital camera in 1152 x 864 x 24 JPEG
The cause of the error is having the BORDER function in BLURRED mode in the clip, with this setting “Size 0.04614”, “Type Blurred” , the Soft edge option seemed to work on the clip but then the in would crash when going to the next clip.
When this filter was removed the error was removed and appeared on the next clip with the border function added. If I used the Bezel or Border option in border it is fine.
This error was repeatable and was then predictable.
I did add the Cookie Cutter to try and get some form of border, but for some reason the picture shrank during the render process.
Perhaps some one could try and reproduce the fault at their end.