Hi Brad...Please answer the following:

Operating System:
DirectX version:
Hard drive type (SCSI/IDE):
Computer:
Capture card:
Camera:

Thanks!

Brad Rosenberg wrote:
>>
>>Jamie,
>>
>>I have this exact problem in Windows 98 SE... I don't
>>really think that it is an accessable issue...
>>
>>If it try it again, immediately after that, I can
capture,
>>but usually, after one successful capture, it will
crash,
>>and I have to re-boot to get control of the 1394 card
back.
>>
>>-Brad
>>
>>Jamie wrote:
>>>>When I use the Sonic Foundry Video Capture App, I can
get
>>>>feed from my source to appear in the preview window
>>without
>>>>error. (in this case, it's from a VCR) When I press
>>record,
>>>>it initiates fine. But when I stop the feed, it gives
me
>>>>the following error every time:
>>>>
>>>>An error occurred while capturing from the device.
>>>>
>>>>An error occurred reading the file. Make sure you have
>>read
>>>>access to the file/folder and that it is not corrupted.
>>>>
>>>>
>>>>Any ideas? I am the Administrator on a W2K box - should
>>>>have no such problems. i'll take any help.
>>>>Thanks.
>>>>Jamie

Hi Jamie...Please answer the following:

Operating System:
DirectX version:
Hard drive type (SCSI/IDE):
Computer:
Capture card:
Camera:


Jamie wrote:
>>When I use the Sonic Foundry Video Capture App, I can get
>>feed from my source to appear in the preview window
without
>>error. (in this case, it's from a VCR) When I press
record,
>>it initiates fine. But when I stop the feed, it gives me
>>the following error every time:
>>
>>An error occurred while capturing from the device.
>>
>>An error occurred reading the file. Make sure you have
read
>>access to the file/folder and that it is not corrupted.
>>
>>
>>Any ideas? I am the Administrator on a W2K box - should
>>have no such problems. i'll take any help.
>>Thanks.
>>Jamie

Hello Dee, I just got done writing you an email...

Here is the information that you requested:

Windows 98 SE
DirectX 7.0 (4.07.00.0716)
Both Hard Drives are IDE, ATA/100 UDMA (7200 RPM) drives
PIII 800 Mhz / 128 MB RAM / DELL Dimension
DAZZLE Capture Card (Texas Instruments OHCI IEEE 1394 card)
Sony DCR-TRV 320 NTSC

Thanks so much for the help,

Brad

dee wrote:
>>Hi Brad...Please answer the following:
>>
>>Operating System:
>>DirectX version:
>>Hard drive type (SCSI/IDE):
>>Computer:
>>Capture card:
>>Camera:
>>
>>Thanks!
>>
>>Brad Rosenberg wrote:
>>>>
>>>>Jamie,
>>>>
>>>>I have this exact problem in Windows 98 SE... I don't
>>>>really think that it is an accessable issue...
>>>>
>>>>If it try it again, immediately after that, I can
>>capture,
>>>>but usually, after one successful capture, it will
>>crash,
>>>>and I have to re-boot to get control of the 1394 card
>>back.
>>>>
>>>>-Brad
>>>>
>>>>Jamie wrote:
>>>>>>When I use the Sonic Foundry Video Capture App, I can
>>get
>>>>>>feed from my source to appear in the preview window
>>>>without
>>>>>>error. (in this case, it's from a VCR) When I press
>>>>record,
>>>>>>it initiates fine. But when I stop the feed, it gives
>>me
>>>>>>the following error every time:
>>>>>>
>>>>>>An error occurred while capturing from the device.
>>>>>>
>>>>>>An error occurred reading the file. Make sure you
have
>>>>read
>>>>>>access to the file/folder and that it is not
corrupted.
>>>>>>
>>>>>>
>>>>>>Any ideas? I am the Administrator on a W2K box -
should
>>>>>>have no such problems. i'll take any help.
>>>>>>Thanks.
>>>>>>Jamie

You're not running out of diskspace are you? Do you have
DMA enabled on the hard drive?

Brad Rosenberg wrote:
>>
>>Hello Dee, I just got done writing you an email...
>>
>>Here is the information that you requested:
>>
>>Windows 98 SE
>>DirectX 7.0 (4.07.00.0716)
>>Both Hard Drives are IDE, ATA/100 UDMA (7200 RPM) drives
>>PIII 800 Mhz / 128 MB RAM / DELL Dimension
>>DAZZLE Capture Card (Texas Instruments OHCI IEEE 1394
card)
>>Sony DCR-TRV 320 NTSC
>>
>>Thanks so much for the help,
>>
>>Brad
>>
>>dee wrote:
>>>>Hi Brad...Please answer the following:
>>>>
>>>>Operating System:
>>>>DirectX version:
>>>>Hard drive type (SCSI/IDE):
>>>>Computer:
>>>>Capture card:
>>>>Camera:
>>>>
>>>>Thanks!
>>>>
>>>>Brad Rosenberg wrote:
>>>>>>
>>>>>>Jamie,
>>>>>>
>>>>>>I have this exact problem in Windows 98 SE... I don't
>>>>>>really think that it is an accessable issue...
>>>>>>
>>>>>>If it try it again, immediately after that, I can
>>>>capture,
>>>>>>but usually, after one successful capture, it will
>>>>crash,
>>>>>>and I have to re-boot to get control of the 1394 card
>>>>back.
>>>>>>
>>>>>>-Brad
>>>>>>
>>>>>>Jamie wrote:
>>>>>>>>When I use the Sonic Foundry Video Capture App, I
can
>>>>get
>>>>>>>>feed from my source to appear in the preview window
>>>>>>without
>>>>>>>>error. (in this case, it's from a VCR) When I press
>>>>>>record,
>>>>>>>>it initiates fine. But when I stop the feed, it
gives
>>>>me
>>>>>>>>the following error every time:
>>>>>>>>
>>>>>>>>An error occurred while capturing from the device.
>>>>>>>>
>>>>>>>>An error occurred reading the file. Make sure you
>>have
>>>>>>read
>>>>>>>>access to the file/folder and that it is not
>>corrupted.
>>>>>>>>
>>>>>>>>
>>>>>>>>Any ideas? I am the Administrator on a W2K box -
>>should
>>>>>>>>have no such problems. i'll take any help.
>>>>>>>>Thanks.
>>>>>>>>Jamie

No, I don't believe that to be the case... the C Drive had
2 Gig free, and the D Drive had 40 Gig Free.... and the
captures I have been doing have been only a minute or two
long, that's all I can get...

-Brad

dee wrote:
>>You're not running out of diskspace are you? Do you have
>>DMA enabled on the hard drive?
>>
>>Brad Rosenberg wrote:
>>>>
>>>>Hello Dee, I just got done writing you an email...
>>>>
>>>>Here is the information that you requested:
>>>>
>>>>Windows 98 SE
>>>>DirectX 7.0 (4.07.00.0716)
>>>>Both Hard Drives are IDE, ATA/100 UDMA (7200 RPM) drives
>>>>PIII 800 Mhz / 128 MB RAM / DELL Dimension
>>>>DAZZLE Capture Card (Texas Instruments OHCI IEEE 1394
>>card)
>>>>Sony DCR-TRV 320 NTSC
>>>>
>>>>Thanks so much for the help,
>>>>
>>>>Brad
>>>>
>>>>dee wrote:
>>>>>>Hi Brad...Please answer the following:
>>>>>>
>>>>>>Operating System:
>>>>>>DirectX version:
>>>>>>Hard drive type (SCSI/IDE):
>>>>>>Computer:
>>>>>>Capture card:
>>>>>>Camera:
>>>>>>
>>>>>>Thanks!
>>>>>>
>>>>>>Brad Rosenberg wrote:
>>>>>>>>
>>>>>>>>Jamie,
>>>>>>>>
>>>>>>>>I have this exact problem in Windows 98 SE... I
don't
>>>>>>>>really think that it is an accessable issue...
>>>>>>>>
>>>>>>>>If it try it again, immediately after that, I can
>>>>>>capture,
>>>>>>>>but usually, after one successful capture, it will
>>>>>>crash,
>>>>>>>>and I have to re-boot to get control of the 1394
card
>>>>>>back.
>>>>>>>>
>>>>>>>>-Brad
>>>>>>>>
>>>>>>>>Jamie wrote:
>>>>>>>>>>When I use the Sonic Foundry Video Capture App, I
>>can
>>>>>>get
>>>>>>>>>>feed from my source to appear in the preview
window
>>>>>>>>without
>>>>>>>>>>error. (in this case, it's from a VCR) When I
press
>>>>>>>>record,
>>>>>>>>>>it initiates fine. But when I stop the feed, it
>>gives
>>>>>>me
>>>>>>>>>>the following error every time:
>>>>>>>>>>
>>>>>>>>>>An error occurred while capturing from the device.
>>>>>>>>>>
>>>>>>>>>>An error occurred reading the file. Make sure you
>>>>have
>>>>>>>>read
>>>>>>>>>>access to the file/folder and that it is not
>>>>corrupted.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>Any ideas? I am the Administrator on a W2K box -
>>>>should
>>>>>>>>>>have no such problems. i'll take any help.
>>>>>>>>>>Thanks.
>>>>>>>>>>Jamie