I had 24 busses setup but only had 10 of the yamaha showing up on the
routing page (DS2416 output 1-8 and DS2416 1-2 (2)) I should also see
1-8 on card 2 but I only see 1 and 2. Now aI also have a SW1000XG and
when I enable it it uses the six busses from that and then the first
4 from the DS2416 one card and the second card doesn't even appear.
Which agian is only seeing the first ten busses. I don't know if
this is a limitation of win2k and vegas pro 1.0b or just a glitch.
But no matter how I setup up the system I only see ten hardwarwe
outputs out of the 22.

John

Peter Haller wrote:
>>You can setup to 26 main busses, each assigned to different
hardware
>>outputs.
>>
>>I have set up Vegas to output to all available outputs of the DSPF
>>with no problem.
>>
>>How many main busses to you have set up? How many of the DSPF
outputs
>>are showing in the routing page?
>>
>>Peter
>>
>>
>>John Wahlen wrote:
>>>>I have a system: Windows 2000, Dual Pentium III 667, 256MB
>>>>RAM, Matrox G400, Dual 19inch mon., Seagate Cheetah 9.1GB
>>>>U2W 10k rpm, Seagate Cheetah 36GB U2W 10k rpm, 2 Yamaha
>>>>DS2416 Audio Cards, Yamaha AX-16 ADAT Lightpipe Card, and 2
>>>>Froniter Design Tango 24 (which gives me 24 in's and out's
>>>>total). My problem with Vegas Pro 1.0b is that it only
>>>>allows me to route 10 outputs to the yamaha in the routing
>>>>propertys. Is this a limitation? Will Vegas audio 2.0 work
>>>>with more than 10 outputs? The inputs work fine. Will you
>>>>put support for these cards in the app at some time?
>>>>
>>>>
>>>>Thanks,
>>>>John

Win2000 may be the problem. I did not try Win2000. (Never could get
the DSPF to install on the early betas, so I have not tried recently.)

Will have to try this and let you know.

Peter


John Wahlen wrote:
>>I had 24 busses setup but only had 10 of the yamaha showing up on
the
>>routing page (DS2416 output 1-8 and DS2416 1-2 (2)) I should also
see
>>1-8 on card 2 but I only see 1 and 2. Now aI also have a SW1000XG
and
>>when I enable it it uses the six busses from that and then the
first
>>4 from the DS2416 one card and the second card doesn't even appear.
>>Which agian is only seeing the first ten busses. I don't know if
>>this is a limitation of win2k and vegas pro 1.0b or just a glitch.
>>But no matter how I setup up the system I only see ten hardwarwe
>>outputs out of the 22.
>>
>>John
>>
>>Peter Haller wrote:
>>>>You can setup to 26 main busses, each assigned to different
>>hardware
>>>>outputs.
>>>>
>>>>I have set up Vegas to output to all available outputs of the
DSPF
>>>>with no problem.
>>>>
>>>>How many main busses to you have set up? How many of the DSPF
>>outputs
>>>>are showing in the routing page?
>>>>
>>>>Peter
>>>>
>>>>
>>>>John Wahlen wrote:
>>>>>>I have a system: Windows 2000, Dual Pentium III 667, 256MB
>>>>>>RAM, Matrox G400, Dual 19inch mon., Seagate Cheetah 9.1GB
>>>>>>U2W 10k rpm, Seagate Cheetah 36GB U2W 10k rpm, 2 Yamaha
>>>>>>DS2416 Audio Cards, Yamaha AX-16 ADAT Lightpipe Card, and 2
>>>>>>Froniter Design Tango 24 (which gives me 24 in's and out's
>>>>>>total). My problem with Vegas Pro 1.0b is that it only
>>>>>>allows me to route 10 outputs to the yamaha in the routing
>>>>>>propertys. Is this a limitation? Will Vegas audio 2.0 work
>>>>>>with more than 10 outputs? The inputs work fine. Will you
>>>>>>put support for these cards in the app at some time?
>>>>>>
>>>>>>
>>>>>>Thanks,
>>>>>>John