-
Audioon 9/17/2017
Audio glitches after upgrading to Vegas 13 64 Bit
The sound engine of Vegas on my observations became "limp" starting with the 10th version. Here's one example: create 100 empty audio tracks in project 5.1 and turn on automation on all the tracks . Playback in version 10 and higher does not even begin (no matter how powerful your computer is). But in Vegas version 8 I can create 1000 such tracks and more - and there are no playback problems. In this case, most likely the problem is in the GUI, but it's impossible to work anyway. Therefore, and also because of the lack of a real 5.1 bus, problems with VST, I did not update after the 10th version.
-
Audioon 3/19/2017
Multi-Channel Plug-Ins
The audio part of Vegas has not been modernized for a long time. Tracks and buses on the input part are only stereo and on the output are multi-channel (and only 5.1 in project 5.1). The use of third-party multi-channel effects is possible only on the master bus, and that is not always the case.
-
Audioon 3/4/2017
A respectful rant.
songsj, Alternatively, you can pay attention to Rapper: http://www.reaper.fm/ I am also tired to expect changes in the audio part of Vegas and is now looking for replacement. Rapper is developing very fast, and I have found there are some things like in Vegas, such: matches in hotkeys and capabilities in the workspace organization.
-
Audioon 2/16/2017
Off Solo Problem
It's my misprint, but I meant: "Ctrl+A". Specifically "Select All"
-
Audioon 2/16/2017
Off Solo Problem
NeppeHuib, try it: "Ctrl + All" and after "X"
-
Videoon 1/31/2017
Track levels fx - normal?
relaxvideo, there is excellent free extension: Timeline Toolse by MOA Software L.L.C. http://www.nfatoys.com/moasoftwarellc/Default.htm that allows add effects chains to selected events. But note that it only works for versions of Sony.
-
Videoon 1/29/2017
Track levels fx - normal?
Cornico, In 10th version of Vegas where GPU acceleration yet was not - it looks similar.
-
Videoon 1/29/2017
Track levels fx - normal?
There is no relation with the GPU. Simple math and sequence of actions. Using Levels in TrackFX given a new count of the coordinate system. Anything below a set value Output Start - no color components. 0.200 - about 50 in the histogram. Below that Vegas can operate only the luminance values.
-
Videoon 1/29/2017
Track levels fx - normal?
This is not a bug. Vegas goes absolutely correct. It's hard to explain it through Google Translate. Fade applies to Event FX. If you want to track FX, then use the on track: Insert/Remove Envelope -> Composite Level. Try it and you will not see the difference: https://postimg.org/gallery/1dqpiklsa/
-
Videoon 12/22/2016
Problem: Vegas Pro 13 and Nvidia GTX 1050ti
May need to install one of the latest drivers for NVIDIA. For my friend Vegas 13 on the new laptop also could not find the GTX 1060. After installing the latest driver - everything works.
-
Videoon 12/16/2016
Adding ANOTHER output preview?
HDMI Splitter is the easiest solution for: "another "output preview" to that 3rd monitor". While use of devices such Blackmagic or Aja give more options and a better image.
-
Videoon 10/18/2016
Nvidia k2000m Vegas 13/14
Try it(.NET update): https://www.vegascreativesoftware.info/us/forum/where-has-my-external-preview-monitor-gone--103626/?page=2
-
Videoon 10/10/2016
blank preview box
As I know Vegas does not work properly with this: Variable Frame rate. Minimum frame rate: 28.571 FPS Maximum frame rate: 30.000 FPS. Need pre-transcoding
-
Audioon 10/8/2016
How to set-up Waves C1 compressor for side-chain/duck narration
"Sidechain is supported on Pro Tools, Logic Pro, Nuendo, Cubase, Sonar, Audition, Ableton Live, FL Studio 12, REAPER and Studio One only." - http://www.waves.com/support/tech-specs/supported-hosts There are no products of Magix too - so, perhaps we still long time to wait this and other useful audio functions.
-
Audioon 9/26/2016
Forced to mix outside vegas pro
I do not know why, but since the 10th version of Vegas, playback with enabled automation mode on all the tracks creates similar problems. And just it is in the project 5.1, when the number of tracks 20 and above. Tested by different people, on different computers, in different projects, with different materials. When the number of tracks with enabled automation mode is larger than 60-80 - playback can even stop. A similar project in the 8th version plays easily. If in SVP 10 (11,12,13,14) in such a project I turn off the automation or change settings to stereo - all played very well, too.
-
Videoon 9/22/2016
Where has my external preview monitor gone?
Today, on the same desktop system, I installed the Vegas for a "clean" Windows 7 and ... voila: output to the second monitor is working. Probably, bug appears in combination with other versions of the installed system components: .NET frameworks xx, Visual C++ ... Redistributable xx and etc.
-
Videoon 9/21/2016
Where has my external preview monitor gone?
On my desktop(Windows 7) the similar problem: video output selection dialog box is empty. Video adapter: AMD Radeon HD 6670. I tried different versions of drivers (Catalyst 13,14,15) but the the same result.
-
Videoon 2/19/2015
Selection Length Not Showing
This is all due to the fact that in the 13 version added the lower Timeline Toolbar. Timeline Toolbar icons moved indicator “Selection Length”. Try to reduce the width of the Track List. To do this: click with the left mouse button on the narrow strip between Track List and the Time Line Area. Move the strip to left until the indicator appears. Sorry for my "googlish-english".
vitus
Offline, Last login 3/15/2019, Member since 8/23/2016