• Video

  9 answers, most recent on 11/7/2025

  RE: Auto Ripple Cut Issue
  What I read was: I want that when I remove ungrouped audio from a fragment, the remaining fragment tracks (and marker) do not move, If you don't want any following events/markers moving after a delete action, you need to turn Auto Ripple off. You
• Video

  16 answers, most recent on 11/9/2025

  RE: Severe lag when cutting or moving clips in VEGAS Pro 23 (4K 25fps)
  Ah, you’re right. I hadn’t noticed, I actually had three audio FX applied on the sound track.But after unchecking them and testing again (cutting or doing actions on the part where I removed the FX), it’s still the same the lag is still there.  
• Video

  No answers, created on 10/28/2025

  Automatic crossfades in Multicamera Editing
  I've just created a multicamera track in Vegas Pro 22. The transitions are all cuts. I know that I can go to each transition and replace it with a fade, but is there a way to have fades be automatically inserted during the Multicamera Editing, or an
• Video

  11 answers, most recent on 11/17/2025

  RE: Removing transition removes audio
  @3POINT - It seems that when I try to add a transition to my timeline that it only goes on the video side and not the audio. Note that my media is MP4 video/audio clips and that the ignore grouping button is not enabled, so the transition should be
• Video

  9 answers, most recent on 11/20/2025

  RE: Feature requests: retain fx entering Multicam Edit & many event fx
  👍2nd the motion. At least for Media-fx & VideoBus-fx which currently get bypassed during multicam edit even if I apply them after making the multicam track. Makes shooting multicam with log media very difficult without the trouble of rendering
• Video

  17 answers, most recent on 11/12/2025

  RE: How to animated picture in picture
  >never worked out if that decay could be avoided and the track kept solid throughout its pathIndeed it can, by playing around with the evolution and extension properties. it's how I produced the below effect that was included in an electronic new
• Video

  4 answers, most recent on 10/31/2025

  RE: Automatic fade transitions in Multicamera Edit
  I will try it on my next Multicamera Edit and will tag solutions if it works. I'm still waiting for some video that goes into my next Multicamera Edit. Thanks! P.S. @Howard-Vigorita What do you mean by "keep unused takes?" Do you mean the tracks
• Video

  11 answers, most recent on 11/17/2025

  Removing transition removes audio
  If I add a transition between two clips, but them remove it, I cannot get the two clips back the way they were. Of course if I use Undo after adding the transition and then removing it, then I get it back. However, it I save the project, close Vegas
• Video

  9 answers, most recent on 11/7/2025

  RE: Auto Ripple Cut Issue
  I want that when I remove ungrouped audio from a fragment, the remaining fragment tracks (and marker) do not move, I want to use Auto Ripple @VVV I was going to say you can't have both but that's not quite true ... Click the ▽ next to the Auto
• Scripting

  7 answers, most recent on 11/11/2025

  RE: AI-generated morph transition script between two selected clips
  Update:I’ve just created a working script that automatically grabs the last frame of Clip A and the first frame of Clip B and saves them as JPGs inside C:\temp. It uses the built-in SaveSnapshot function, so it works natively without any external
• Scripting

  7 answers, most recent on 11/11/2025

  RE: AI-generated morph transition script between two selected clips
  Thanks a lot, jetdv! 🙌You’re absolutely right — I’ve just updated the script following your suggestions: using Timecode.FromFrames(1) instead of calculating FPS, and calling SaveSnapshot(..., timecode) directly without moving the cursor. It’s much
• Video

  11 answers, most recent on 11/17/2025

  RE: Removing transition removes audio
  Note after getting the 2 video track uncrossed that there is now a gap in the audio. do you mean this gap? This is a normal Vegas behaviour when you split an event and makes just the audio fade out/in within a frame. nothing to worry about, it
• Video

  2 answers, most recent on 11/22/2025

  RE: I can't fade-in my video
  @Al_Korzonas There must be another event at the start of your timeline, grab your video & drag it to the right to uncover the hidden event. ---------- The 00 at the start of the audio track happens when you add one event on top of another, like
• Video

  9 answers, most recent on 11/20/2025

  RE: Feature requests: retain fx entering Multicam Edit & many event fx
  @Al_Korzonas is it not usual to edit/trim first in a multicam project and after that when switching back to the final timeline adding fx/color corrections etc? Adding fx/color corrections before, could hamper a fluent preview while editing/trimming
• Video

  9 answers, most recent on 11/7/2025

  RE: Auto Ripple Cut Issue
  If you don't want Auto Ripple to apply when making a cut, turn Auto Ripple off (and on as well) by using your choice of: Ctrl-L; or the Auto Ripple button in the Timeline Toolbar (under the timeline), or via the Ripple menu selection in the Options
• Audio

  4 answers, most recent Yesterday

  RE: Sound stops and starts in Vegas project
  The audio is the sound track of an MP4 Thanks but you don't say what format it is. It's probably AAC but please post media info on one of your problem files. Instructions here
• Video

  17 answers, most recent on 11/12/2025

  RE: How to animated picture in picture
  @wiel-gulpen It's not easy but Vegas can do it without extra plugins. Just use the media-generator solid color, like red, reducing the frame height down to 20 or so to turn it into a line. Then place it on a track above your map graphic... you can
• Video

  75 answers, most recent on 11/19/2025

  RE: VEGAS Pro 23 – Bug & Issues Thread
  I'm just glad I invested in Continuum some years ago for the perpetual, and have upgraded each year. It is an amazing kit of plugins. I totally agree. Some 10 years ago I cross-graded from Red and Graffiti to BCC and have been on the BCC
• Video

  47 answers, most recent on 11/14/2025

  RE: VEGAS Pro 23 Bug: Timeline Events Lag After Ungrouping Video/Audio
  Same here, tested your .veg and video. No problem as described by you. Then I grouped the video and audio tracks again, moved them several times, then ungrouped them again, but still got the same result as Jack.(4K monitor here) Thank you for
• Video

  175 answers, most recent 5 hours ago

  RE: VEGAS Pro 23 build 302 General Discussion
  I’m using Vegas 20, and when my 30-minute videos are finished (around 200 cuts, transitions, text, color correction, active tracking), it crashes every 10 minutes. Vegas 22 was better in that regard. Unfortunately, I can’t find any information on
• Video

  31 answers, most recent on 11/22/2025

  RE: What application will play Vegas-created 1920x1080-24p .avc files?
  I just tried converting the .avc file to .mov and to .mp4, using VideoProc Converter. Media Player plays both .mov and .mp4 now, but there is no audio. Also, the video is running slightly faster then the original as I was creating the Multicamera
• Video

  13 answers, most recent on 11/15/2025

  RE: New Build AMD 9950X GTX 1080->Nvidia RTX 3080ti/AMD Radeon RX 9600 XT?
  Been looking into it: RTX 3080 Ti 12GB 350W £410 Secondhand 5 Year Warranty > 2 Slots 3 Fans or £380 eBay no Warranty Rel performance=124% RTX 4070 12GB 200W £410 Secondhand 5 Year Warranty > 2 Slots 2 Fans Rel performance=115% RTX 5060TI 16GB
• Video

  15 answers, most recent on 11/11/2025

  RE: VP23 - 10 minute render for 40 second clip?
  Just did another test, the renderspeed depends a lot of how many characters are used. That's probably it. I used a lot of text for that. For clarification, the video is 1080p 60 fps. I render same as the source - in this case 1080p 60fps AVCHD
• Video

  12 answers, most recent 11 hours ago

  RE: Vegas Pro version 22.
  I found that if you have these two boxes checked and leave the screen (minimise to desktop/go to browser), on going back Vegas takes time to rebuild the timeline if Vegas takes too long you may get windows giving a not responding message. In any