• Video

  4 answers, most recent on 11/26/2015

  Vegas2Handbrake setup help?
  Happy Thanksgiving from her in the US! Just upgraded to Vegas 13 from Vegas 10 and am trying to get this Vegas2Handbrade script to work...: http://www.vegasvideo.de/vegas-2-handbrake-en I know it's been discussed a lot her, but after two hours, I
• Video

  6 answers, most recent on 10/20/2015

  RE: Transmitting video signal to another room
  Agreed with Mike that hard wiring with Cat 6 and baluns is a solution well worth looking into. A few provisos though ... depending on the installation based on hardware, 2 runs of Cat 6 is generally recommended for each balun - but Cat 6 is not
• Video

  23 answers, most recent on 8/22/2017

  RE: Smart Rendering in a Batch with FFmpeg (GH4 etc.)
  "This thread seems more like something for CC-FFMPEG forum or at least the Vegas Scripting Forum." I agree with you if it was still in development, and I did post an early version of the script in the Scripting forum when I needed help (and didn't
• Video

  75 answers, most recent on 10/4/2016

  RE: studio RGB, computer RGB - still not getting it
  RE: @blazer - I believe DV was 601 and not 709. 709 came out with HD codecs. Wiki: "DV uses lossy compression of video while audio is stored uncompressed.[2] An intraframe video compression scheme is used to compress video on a frame-by-frame
• Vegas Movie Studio (up to ver. 17)

  2 answers, most recent on 8/20/2015

  RE: Audio Pan updated ?
  Thanks Steve, it was a "hearing- it" issue . . . .which I resolved a few minutes ago....by playing a Rendered foley-sound of brid-flight as the little perisher managed to get into a panned sequence. I thought this would still work OK with the
• Video

  85 answers, most recent on 8/4/2016

  RE: VegastoHandBrake installation
  Unbelievable, I went back to V12 and the script isn't working; doing the same thing as reported in this thread. C:\Program Files\Sony\Vegas Pro 12.0>for /F %i in ("C:\frameserver\vegas.avs\vegas.avi") do if %~zi GTR 160000 goto
• Video

  85 answers, most recent on 8/4/2016

  RE: VegastoHandBrake installation
  Just went through all this and having the same problem, I think. Does the Mount Failure dialog you are all getting say "The file could not be mounted." ? If so, that's also what I'm getting. I tried the latest version 178 and then 170. The 178
• Video

  23 answers, most recent on 7/10/2015

  RE: I swore I would never ask this type of question...
  Hmm...first link is not working, try this Canon T5i bundle deal $449.00 after
• Video

  14 answers, most recent on 5/20/2015

  RE: Lanc controller for Sony HDR cx900
  I am cheating. I bought a used Sony VCT-80AV Tripod of eBay just to get the LANC controller and fixed that to the AX100 with the adapter cable and made an adapter to fit it to my trusted tripod. Was a bit of work but that on works very well; no
• Video

  85 answers, most recent on 8/4/2016

  RE: VegastoHandBrake installation
  "I cannot find the actual download link for AviSynth 2.6 as there are so many links that take me all over the place and back again. When I eventually find 2.6 is it as simple as just installing version 258?" Standard AviSynth 2.6_RC3 is here (the
• Video

  85 answers, most recent on 8/4/2016

  RE: VegastoHandBrake installation
  I see there are two cases which could throw a mount failure message. - One is AviSynth is not working (correctly). - The other one is the file mount systems failed to register the AVS file. Both cases causes same error message. So I'd suggest
• Video

  85 answers, most recent on 8/4/2016

  RE: VegastoHandBrake installation
  To those who are having problems, it is most likely is due to the fact that using the network for the delays does not always work. It is quite possible that on a new install that what used to work may not work now. So I had modified the *.bat files
• Video

  4 answers, most recent on 4/21/2015

  RE: Sony Vegas Pro 12 Slow Preview
  I run Win 8.1 and just rely on Windows Defender, with a periodic scan with Malware Bytes. AV software has always been a serious system overhead, that has gotten better with more CPUs and faster CPUs. I was going to say check to make sure your
• Video

  8 answers, most recent on 8/11/2015

  RE: Vegas2Handbrake frustration...
  - At DebugMode FrameServer Setup: Installation Options screen, Select: Sony Vegas (64-bit) Plugin. Click: Next - Install FrameServer in the root C:\Program Files\Sony\Vegas Pro 12.0 folder. Click: Next - Install Sony Vegas (64-bit) Plugin in
• Video

  8 answers, most recent on 8/11/2015

  RE: Vegas2Handbrake frustration...
  I believe VidMus is referring to the batch file located in the following folder: \fs2hb_en\frameserver\batch VidMus' start_vegas2handbrake.bat revised script that doesn't need an internet connection: timeout /t 2 /nobreak start ""
• Video

  90 answers, most recent on 3/24/2015

  RE: ? about HD --> SD DVD
  John, Are you still using VFAPIConv to convert the frameserved avs file to avi? I wanted to try it, but the utility only allows files with the extension .wbp I saw other screenshots that in fact used to allow .avs files, but the versions on the
• Video

  3 answers, most recent on 2/22/2015

  OT:Frameserve to Handbrake (aspect ratio is off)
  Hi, I'm using V12 with Handbrake V 0.10.0.6534 with debugmode (frameserver). I've been using the one-click to Handbrake method as described here: here I've got everything almost working except that the file that handbrake produces in 4:3
• Video

  19 answers, most recent on 11/24/2014

  RE: Capturing DV-AVI via Vegas
  One other thing to consider is "restoration." No matter how good your deck and capture card, you are still dealing with crummy consumer analog video. It will be full of both luma and chroma noise, and will look very fuzzy, especially now that
• Video

  18 answers, most recent on 11/23/2014

  RE: How to render MPEG2 Blu-ray with Audio
  @Stringer It is faster on my system too. I use Vegasaur to render the MPEG2 and AC3 in one go; put both into DVDA and there is no additional processing in DVDA other then preparing the disc image (BD) or disk folders (DVD). But yes, the total
• Video

  42 answers, most recent on 10/15/2014

  RE: Blu-Rays too quiet.... stumped....
  "On our laptops we have volume controls and on our TV's we have remote controls and we expect to use them to set the volume how we want it--" Well... really our volume control is supposed to control the overall gain of the system as WE desire it.
• Video

  85 answers, most recent on 10/3/2016

  RE: One-click frameserving from Vegas to Handbrake
  I had similar issues, I was installing the FrameServer app in the default path but needed to install it in the Vegas 12 folder. - At DebugMode FrameServer Setup: Installation Options screen, Select: Sony Vegas (64-bit) Plugin. Click: Next -
• Video

  51 answers, most recent on 8/20/2015

  RE: From Vegas to DVD - Another Way.
  I had to read your workflow several times to understand what problem you are trying to solve. You are still encoding using the MainConcept MPEG-2 encoder in Vegas, so you aren't overcoming any limitations in that part of the workflow. Instead, it
• Video

  136 answers, most recent on 1/12/2017

  RE: From Vegas to HandBrake
  I got rid of the pings for delay and can now run it just fine WITHOUT THE INTERNET OR NETWORK!!! The following is the updated batch file that now works for me. The 'nobreak' prevents the keyboard from stopping it. The 'timeout' works much better
• Video

  19 answers, most recent on 8/29/2014

  RE: 16mm to Digital
  I'm interested in learning how to run that script. I've never worked with them before and so can you tell me how to get started?Describing how to use AVISynth is way too much to cover in a forum post. Doom9.org is where AVISynth is discussed. Here