Search the VEGAS Community for tutorials, questions and solutions as well as for forum members

Hi, I need help with a script I'm writing. I'm trying to add a specific effect to it along with a chosen preset, but I'm not having any success getting it to work. Could someone help me figure out what I'm doing wrong, please? using

Video

2 answers, most recent on 6/3/2024

RE: [Solved] How can I prevent Vegas from automatically activating Color Grade?

Remove the Color Grade effect on the track Right-Click the track header Choose "Set Default Track Properties" In the window that opens, click on OK Note, in the window that opens there's a "Restore original defaults" option too.

Scripting

4 answers, most recent on 8/13/2024

RE: [Solved] A Script that swaps events and overlap

I'm confused as to what is on the two tracks. You're overlaying fully over other events on the second track? It would be simple to just get the two fade lengths and then set them again after moving the event.

Video

4 answers, most recent on 4/7/2024

[Solved] Automation Recording for Video Track keyframes, is this possible?

I'm checking the official Vegas help files. On this page, it says: RECORDING TRACK ENVELOPE AND KEYFRAME AUTOMATION Automation recording allows you to edit envelope and keyframe settings by using the controls in the VEGAS Pro interface. When

Scripting

11 answers, most recent on 8/16/2024

[Solved] Reset Pan & Crop is not resetting Mask with it.

I want my code should reset pan & crop as well as mask. private void ResetPanCrop(Vegas vegas) { List<TrackEvent> selectedEvents = GetSelectedEvents(vegas); if (selectedEvents == null) {

Scripting

16 answers, most recent on 10/20/2024

[Solved] Simple matching event length script is not working properly.

hello guys.. It match length well when length is extended than original by decreasing it.and if video event is trimmed (using split S) then it works good by in extending. but when make my event small by moving edge back then it dosnt

Scripting

4 answers, most recent on 2/10/2025

RE: [Solved] Selecting video effects. How to add keyframes to a key?

Thanks, solved the problem with the script here is a variant with ready animation and the second keyframe becomes always at the end.And now you can assign to one key. using System; using System.Collections.Generic; using ScriptPortal.Vegas; using

Audio

6 answers, most recent on 3/5/2025

[Solved] Randomly Can't move the GAIN Slider on a clip.

While editing, suddenly, the little GAIN slider, where you grab the blue dash, and pull it down, or back up... will stop working. Once it stopes. My project is trash, and I have to start over. Nothing I do, makes it work again, other than deleting

Scripting

11 answers, most recent on 8/17/2024

RE: [Solved] Velocity Envelope and Points

Go back to this: private void AddEnvelopePoint(Envelope MyEnv, Timecode PointLoc, double PointSpeed) { try { EnvelopePoint newPoint = new EnvelopePoint(PointLoc, PointSpeed);

Audio

7 answers, most recent on 5/23/2025

[Solved] After rendering, the audio track is offset by 65 milliseconds

Below are the cut pieces of video. Above is the rendered file. The videos are currently synced. But the audio track is out of sync (no stretching or tone shifting effects). Below is a music track without any special features. I checked and

Audio

3 answers, most recent on 9/1/2025

[Solved] Audio Monitoring

I have been trying so hard to get to a place where I can monitor my audio input. The track shows I have a signal coming in but I can't for the life of me find the monitoring option. Please help if able. Thank you.

Scripting

4 answers, most recent on 2/10/2025

[Solved] Selecting video effects. How to add keyframes to a key?

Hi all, please help me with a script I want to assign to keyboard shortcuts to execute a command for Black Bar Fill that it immediately becomes and with keyframes 5 sec. Animation. Here is a script that outputs all video effects. using

Scripting

8 answers, most recent on 7/19/2024

RE: [Solved] Transcode & replace media file while active project opened. Possible?

private void TranscodeMedia(RenderTemplate renderTemplate, string fileExtension) { List<TrackEvent> selectedEvents = GetSelectedEvents(vegas); if (selectedEvents == null || selectedEvents.Count ==

Audio

9 answers, most recent on 11/3/2024

[Solved] Deleting space at end of timeline

Good Morning All, I cannot for the life of me figure out how to remove time off of the timeline after an audio track. I have three minutes of blank timeline a the end of my audio tracks.I don't even know how it got there, Selecting that region of

Video

One answer, on 12/20/2024

[Solved] Add Across Tracks - incorrect alignment

I recently upgraded from Vegas Pro 20 to 22 and am seeing some bad behavior in v22 build 194. I use multi-track audio with my productions, so I frequently drop 12 to 32 audio track *.wav files onto the timeline. The way I do this is by dragging the

Scripting

One answer, on 8/7/2024

[Solved] NEED HELP In Script: Transcode Media Inside VEGAS

private void TranscodeMedia(RenderTemplate renderTemplate, string fileExtension) { List<TrackEvent> selectedEvents = GetSelectedEvents(vegas); if (selectedEvents == null || selectedEvents.Count ==

Video

5 answers, most recent on 1/20/2025

[Solved] Can I copy and past a single frame or section of an event?

I can copy and paste events. I can split events. But when I do this, the Mocha Pro tracking is not in line with the copied frames. The tracking data always displays as if it's at the beginning of the event, no matter what part of the event I

Scripting

10 answers, most recent on 9/25/2024

RE: [Solved] Script for specified change of Pl.back Rate and length of sel. Events

@Julian-M Why did you delete CorrectVideoEventLength() and CorrectAudioEventLength()? For code that changes the length, the old one is correct. All that needs to be changed are the two lines I mentioned above that change the rate. However,

Video

15 answers, most recent on 8/3/2024

[Solved] color correction

I'm baffled as to what I might be doing wrong. When I color correct I'm getting the correction on all the tracks, not just the event track. Here's a video. Thanks for any help.

Video

32 answers, most recent on 5/8/2025

[Solved] Problem after updating Vegas 22. Does not open mp 4 mpeg-4 video codec

After the latest update of Sony Vegas 2022, the video track in mp 4 quality with mpeg-4 codec does not open. Everything worked fine before the update. Tried almost everything I can and nothing helps. Installed k lite, xvid, quick , reinstalled and

Video

7 answers, most recent on 3/3/2024

[Solved] Vegas Pro 19: how to move assets to a new track (Newbie question)

Hi everyone, This is my first post and I'm currently learning Vegas Pro. I have a basic question which may be due to the design of the software or there could be a shortcut or tickbox in Preferences... I have 4 tracks. Track 1 = Video, Track 2 =

Video

8 answers, most recent on 6/30/2025

RE: [Solved] Video Envelope - Velocity - cannot set to 100%

Two ways ... 1/ Substantially increase the track height which should give finer control over node positioning; or 2/ R click on the node and from the context window that opens and select one of the presets (e.g. 'Set to Normal velocity') or 'Set

Scripting

One answer, on 6/14/2024

[Solved] Render Selected Audio as New Take

I'm trying to create a script that renders the audio from the selected event on the timeline in .wav format and imports it back into the timeline with a take along with the original audio from the selected event, but I don't know the logic for

Scripting

4 answers, most recent on 10/15/2024

[Solved] Can't get script to assign media to fixed X Center & Y Center, help...

I'm pasting in two scripts: The first one works and takes highlighted media and adjusts the X Center and Y Center by a specific amount relative to where they started out, here's the working script: using System; using System.Windows.Forms; //