• Video

  6 answers, most recent on 1/30/2007

  RE: Fatal Exception Error
  I work with Chris and witnessed the crash issue. Now at home, I am experiencing a similar thing. The only thing I can think of is that we both just upgraded to 7d. Here is my error: Sony Vegas 7.0 Version 7.0d (Build 192) Exception 0xC0000005
• Video

  4 answers, most recent on 1/12/2007

  RE: Vegas 7.0 c with Vista crashing
  "Sony Vegas 7.0 Version 7.0c (Build 169) Exception 0xC0000005 (access violation) READ:0x30 IP:0x66869B97 In Module 'QuickTime.qts' at Address 0x66800000 + 0x69B97 Thread: VideoCache ID=0xCA4 Stack=0x51BF000-0x51C0000 Registers: EAX=00000030 CS=001b
• Video

  4 answers, most recent on 1/12/2007

  Vegas 7.0 c with Vista crashing
  I'm having a hard time getting Vegas 7.0c to run on Vista...and there are a couple reasons I need to have a second machine with vista and vegas...so thankfully my main machine is and will be xp for a while. First, the media manager won't install
• Video

  11 answers, most recent on 2/3/2007

  Quicktime bug is back!
  After installing Vegas 7c all was well until I installed the latest QT update (QT 7.1.3). Now when I open a project with an MOV file in it it crashes. I read on an earlier post that downloading some authoring tools free from Apple.com would fix
• Video

  6 answers, most recent on 12/27/2006

  RE: HDV crash issue
  Well.....All went well, reinstalled 7.c tested the prerender no crash. installed 3.3 cineform tested again no crash. YEAH lifes good! UNTIL.... then switched my project media bin from deatil view to thumbnail view.(this is with std preview window
• Video

  No answers, created on 12/23/2006

  M2T Error Shuts down Vegas 7b...
  I just finished capturing some footage and as soon as I click on a M2T clip in the Vegas Explorer I get the following error and then Vegas shuts down. I captured via HDV Split. HDV Split apparently made a file that contained no time (or video) and
• Video

  9 answers, most recent on 1/20/2007

  Upgraded to 7.0c and now reliably crashes
  Hi I just upgraded to 7.0c and now about 80% of the time creating a subclip in the trimmer causes Vegas to crash. Am on XP SP2 on a Sony Vaio ;-) Clips can be from any of my attached disks, MPeGs from an Everio or DV from a Sony GV-D300E, so it
• Video

  7 answers, most recent on 12/28/2006

  Error While Rendering M2T mpeg-2
  I've made several attempts to render a half hour HD project and each time the result is an error message. The error comes after 8 or 9 hours of rendering. The last error occurred at 90% complete and gave me the message pasted in below. After I
• Video

  5 answers, most recent on 10/20/2006

  RE: v7b crashes while rendering
  ok guys, I tried the final render. Heres what happened. Thanks to my CLOSE monitoring (zzzzz) it crahsed to a blue screen. Thanks to jaegersing I stopped it from the auto restart and wrote the error codes. using 7.b 151 1st render: a mix of SD
• DVD Architect

  6 answers, most recent on 10/26/2006

  RE: Crash with DVDA 4
  The same. m2v 352x576 demuxed from DVD. After selecting it in project and switch to timeline window: --------------------------------- Sony DVD Architect Version 4.0a (Build 147) Exception 0xC0000005 (access violation) READ:0x5F4D995
• Video

  7 answers, most recent on 10/19/2006

  Quicktime Problem with V7.0b
  Ok, been having problems with Vegas 7.0a and b crashing when I import quicktime files into the timeline. I have reinstalled both vegas and quicktime several times with no luck. When it crashes I get the following error. Sony Vegas 7.0 Version
• Video

  19 answers, most recent on 10/20/2006

  All vers. of Vegas crash ONLY rendering
  Hi, I had Vegas 5, 6 and 7 all give me this problem. When I render my project to output it to a DV file, Vegas crashes. I get the error message "An error occured during the current operation. An exception has occured." Then, and you'll excuse me, I
• Video

  One answer, on 10/10/2006

  Vegas 7a Dump - Creating MPEG
  I'm trying to create an MPEG Transport Stream and get the following dump when I try to render using MainConcept MPEG-2 setting the ourput type to MPEG-2 and the Stream Type to "Transport" Any ideas ?????? Thanks Geoff Sony Vegas 7.0 Version 7.0a
• Video

  One answer, on 9/22/2006

  V7 stack dump
  Just got a stack dump. Had just booted the computer, started vegas, closed mixer/scopes panel and boom, stack dump. Sony Vegas 7.0 Version 7.0a (Build 115) Exception 0xC0000005 (access violation) READ:0x45FA80C IP:0x421BD4 In Module 'vegas70.exe'
• Video

  10 answers, most recent on 10/11/2006

  RE: error message when rendering
  I even tried opening the raw video clip in Acid then rendering it to .wmv and same crash results. I can render to .wma no problem. Sony ACID Pro 6.0 Version 6.0b (Build 305) Exception 0xC0000005 (access violation) WRITE:0x8445A40A IP:0x5909B75A In
• Video

  10 answers, most recent on 10/11/2006

  error message when rendering
  When I'm trying to render a clip to .wmv I keep getting error message, then the app crashes. Never had this happen before and have used vegas for years now. It's part of my daily work and I can't figure out why it started doing this. I tried
• Video

  6 answers, most recent on 8/23/2006

  RE: Red Event -Data Corruption?
  Recaptured. It was not in the media pool. Restarted Vegas and pointed the offline file reference to the file that I think was recaptured and this comes up. Sony Vegas 6.0 Version 6.0d (Build 210) Exception 0xC0000005 (access violation)
• Vegas Movie Studio (up to ver. 17)

  2 answers, most recent on 6/29/2006

  importing from DVD fails
  I have been trying to import clips from a DVD into a project and get an error importing that I have pasted below. I contacted Sony via email and they suggested that I uninstall Vegas completely, including regedit which I have done and then
• Video

  33 answers, most recent on 8/14/2006

  RE: Check out these new FX plug-ins
  ow no... Sony Vegas 6.0 Version 6.0d (Build 210) Exception 0xC0000005 (access violation) READ:0x0 IP:0x2326AA8 In Module 'Radiance.dll' at Address 0x2320000 + 0x6AA8 i can't get to work... .net is updated. tried even .net 3
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 6/21/2006

  importing media error
  Hi All, Just purchased this product for the first time. I am trying to import an MP3 file. I use the >> File >> Import >> Media >> menu selection. The Explorer box pops up OK. When I use the "up one level" or pull down the
• Video

  5 answers, most recent on 6/18/2006

  RE: Render error
  I too have been getting this error. No idea what this is but trying to render a 20 minute interview to AVI NTSC 24p and will bug out at random places during the render. I tried uninstall and reinstall vegas 6d but not avail. Please advise if
• Video

  5 answers, most recent on 6/18/2006

  Render error
  Please can anyone tell me what this error means? Thanks, Tara Sony Vegas 6.0 Version 6.0d (Build 210) Exception 0xC0000005 (access violation) READ:0x0 IP:0x0 In Module 'vegas60.exe' at Address 0x0 + 0x0 Thread: ProgMan ID=0xDB0
• Video

  32 answers, most recent on 5/10/2006

  RE: HDV Timeline Woes...
  Well, I told Sony Support about my issues, so we'll see what they have to say. ------------------------------ Customer (John Beale) - 05/04/2006 12:20 PM I am experiencing frequent crashes when trying to view, edit, or render 1080i HDV (.m2t files)
• Video

  32 answers, most recent on 5/10/2006

  HDV Timeline Woes...
  Okay, I know that it is a known fact that you cannot clutter up the timeline with HDV clips or it will crash. My question is why. I want to to use hdv split to help distinguish between the cips captured (making a baseball highlight vid with tons