Hi, i had a similar setup and also clicks, it was the motherboard
which fitted not to my motu2408 pci card.
So maybe you check this.
good luck Walter

Aaron Carey wrote:
>>
>>
>>Mayo Hurajt wrote:
>>>>Hi!
>>>>I have Delta 66 in my computer (P3 700, 128 mb ram)
>>>>
>>>>I'm usin' two monitors, one on AGP & one on the PCI
>>>>graphics card. I have problem with clicks and pops from
>>>>digital and 3&4 out. When I turn PC only with AGP card...
>>>>all is ok. But when I turn it with only PCI card is the
>>>>same (clicks & pops). I tried different PCI positions and
>>>>different types of PCI cards (ATI, S3) and i have still
>>>>this problem. When I play some wave from Sound Forge
>>>>(through digital or 3&4 out) is it OK.
>>>>
>>>>Has anybody knows where is problem ????
>>>>
>>>>Big THX.
>>
>>I run the same setup....voodoo 3 agp and stb velocity128 pci
>>I had clicks and pops too...Im not sure what it was that worked...
>>but I messed with the IRQ's on the video cards and the
soundcards..I
>>run three...mixtreme by soundscape, echo/toyzrus gina and aardvark
>>tdif
>>also there are "tools" that the video card installs with the
drivers
>>that can hi-jack the pci bus...turn those off
>>make the agp your secondary monitor...if youre running win 98
>>since I installed win2k, I havent messed with anything and havent
had
>>any problems with clicks or pops
>>
>>

Walterius Till wrote:
>>Hi, i had a similar setup and also clicks, it was the motherboard
>>which fitted not to my motu2408 pci card.
>>So maybe you check this.
>>good luck Walter
>>

what motherboard fixed the problem?
I just recomended a aopen ax6bc to my friend with a 2408...Ill tell
him which one you use, if youre not having problems...which video card
(s) do you use?

Hi, I can recommen Matrox dual head videocard and a P3b dual
processor Asustek board. this config works very good. the only
problem was digital sync from extern clocks, so i have chosen
Motu2408 to be Digi MasterClock and it works really great.
greetings
Walter

Aaron Carey wrote:
>>
>>
>>Walterius Till wrote:
>>>>Hi, i had a similar setup and also clicks, it was the motherboard
>>>>which fitted not to my motu2408 pci card.
>>>>So maybe you check this.
>>>>good luck Walter
>>>>
>>
>>what motherboard fixed the problem?
>>I just recomended a aopen ax6bc to my friend with a 2408...Ill tell
>>him which one you use, if youre not having problems...which video
card
>>(s) do you use?
>>

Walterius Till wrote:
>>Hi, I can recommen Matrox dual head videocard and a P3b dual
>>processor Asustek board. this config works very good. the only
>>problem was digital sync from extern clocks, so i have chosen
>>Motu2408 to be Digi MasterClock and it works really great.
>>greetings
>>Walter
>>


Thanks a billion!!!
are you running two processors?
pentiums? or celerons?

I am running pent3 500 on one of our machines with matrox G400
dualhead vid card.This is an amazing card!!!!!Def recommend rather
than two cards!As well as the frontier TANGO 24 for ins and outs.Add
a wavecenter card from frontier and were set!
Look into the matrox card,for it has some great options for vid work
and other goods!
:-)

Aaron Carey wrote:
>>
>>
>>Walterius Till wrote:
>>>>Hi, I can recommen Matrox dual head videocard and a P3b dual
>>>>processor Asustek board. this config works very good. the only
>>>>problem was digital sync from extern clocks, so i have chosen
>>>>Motu2408 to be Digi MasterClock and it works really great.
>>>>greetings
>>>>Walter
>>>>
>>
>>
>>Thanks a billion!!!
>>are you running two processors?
>>pentiums? or celerons?
>>

sorry that i have to calm down.
It is a little bit tricky.running 2 P3s 500Mhz works fine, but only
with my sounblaster card. I have two systemems and 2 soundcards
soundblaster live and motu2408 on my machine(win98 + win2K).
for mixing down with a lot cpu power i can only use the
soundblasterlive but its audioquality is not good - so we have to
wait.
Motu told me, that they are going to write drivers for win2K.
I hope they do it soon!!!!!!!!!!!!!!!!!!
I am satring a large project in September.Maybe you can help me and
write also to Motu that they should go on with the drivers.
thanks
Walter

Aaron Carey wrote:
>>
>>
>>Walterius Till wrote:
>>>>Hi, I can recommen Matrox dual head videocard and a P3b dual
>>>>processor Asustek board. this config works very good. the only
>>>>problem was digital sync from extern clocks, so i have chosen
>>>>Motu2408 to be Digi MasterClock and it works really great.
>>>>greetings
>>>>Walter
>>>>
>>
>>
>>Thanks a billion!!!
>>are you running two processors?
>>pentiums? or celerons?
>>

Hi David!
can you tell me if Tango 24 is workin with win2K and the costs
thanks
Walter

David W. Ruby wrote:
>>I am running pent3 500 on one of our machines with matrox G400
>>dualhead vid card.This is an amazing card!!!!!Def recommend rather
>>than two cards!As well as the frontier TANGO 24 for ins and
outs.Add
>>a wavecenter card from frontier and were set!
>>Look into the matrox card,for it has some great options for vid
work
>>and other goods!
>>:-)
>>
>>Aaron Carey wrote:
>>>>
>>>>
>>>>Walterius Till wrote:
>>>>>>Hi, I can recommen Matrox dual head videocard and a P3b dual
>>>>>>processor Asustek board. this config works very good. the only
>>>>>>problem was digital sync from extern clocks, so i have chosen
>>>>>>Motu2408 to be Digi MasterClock and it works really great.
>>>>>>greetings
>>>>>>Walter
>>>>>>
>>>>
>>>>
>>>>Thanks a billion!!!
>>>>are you running two processors?
>>>>pentiums? or celerons?
>>>>