I dont know anything about external monitor and hardware

stumpmvhs wrote on 8/2/2002, 10:46 PM
Hello. I got Vegas Video about 2 weeks ago. I would like to use the "external monitor" but all i have is an analog capture card "ATI all in wonder 128 pro" and i need to know what i need to use the external monitor. I DO NOT have a dv camera. I have a VHS-C. I looked at the ieee 1394 cards and they can only output to dv but i dont have anything "dv" i just want a simple connection from my computer to my tv so i can preview my stuff. WHAT EXACTLY DO I NEED?????? no one seems to know. Does a "broadcast monitor" have a "dv" input?? Please help me out so i can buy exactly what i need. Thanks

Jason

Comments

BillyBoy wrote on 8/2/2002, 11:14 PM
If you don't have anything DV, you're out of luck. You need a IEEE 1394 card (firewire) a digital camera or one of the converter boxes and a regular TV with video in capability. Otherwise you can't see the preview on an external monitor in real time. Without that any adjutments you apply with filters that effect color and levels of brightness will show differently on your computer monitor then they will once you rendered video is viewed on your TV.
stumpmvhs wrote on 8/2/2002, 11:32 PM
I dont have a dv camera. Now, if i did have a dv camera, would i use the camera output to put in the tv? Meaning you have your dv cable from your computer, to your dv camera, to your tv?? just wondering. thx

Jason
stepfour wrote on 8/3/2002, 1:28 PM
Yes, that's how it works. If you don't have a nearby TV, you could also preview on the tiny little LCD screen on the DV Camera. A small view, but still gets the preview off your monitor to free up some working screen. Warning, the audio is not previewed, except during capture, so you will need to monitor the audio through your computer speakers.

Some people also use a NTSC monitor instead of a TV. Usually more expensive, but supposedly such monitors show you a perfect NTSC picture so you can adjust things. One of the main advantages is being able to see what any software-based color correction will look like. I don't think VV3 has any color correction. Anyway, for me, a small TV with decent resolution and RCA type inputs works just fine, and assuming I shot good footage, no color correction is needed.
wcoxe1 wrote on 8/4/2002, 9:29 PM
A common setup would be:
From the computer to the DV Camcorder, by Firewire (1394)
From the DV Camcorder to the TV or Monitor:

1) By RCA Pin cable, somtimes called "composite." this is the lowest quality and most common input and output, common on most devices, but better is,
2) By S-Video, if possible, must have it on both the camcorder as output and TV or Monitor as input. Still better is,
3) By Component, a higher end, but not very common set of inputs and outputs. Usually requires
a) DV (Firewire) to a converter box, and then b} by Component cable from the converter to the Monitor inputs (usually not found on ordinary TV sets.)
Another method is emerging. There are a VERY few EXPENSIVE TV set/Monitors with IEEE 1394 Inputs. I have seen them advertised, and they look nice on paper, but I have had no information about the color quality. They are all LCD, and that leads me to believe that they look more like computer monitors thatn TV sets or Monitors. Time will tell. I say that they are expensive because, for the size, you can get a fine TV set for a LOT less. For instance, the last time I looked, the TVOne 15" LCD with 1394 input was $1600 or so. That is a bit much unless it is VERY, VERY, VERY good.
HPV wrote on 8/4/2002, 9:49 PM
I don't think VV3 has any color correction.
-----------------
Huh ? Vegas has deep color correction tools.

Craig H.