Loose audio when scrubbing w/ Assignable FX

jdupre wrote on 7/8/1999, 1:57 AM
I have been working on several variations of the same project, and when I use the scrubber
when there is an assignable FX on the mixer the audio output dies. The clock keeps running,
but there is no output. Sometimes by releasing the scrubber tool the sound will come back, but
sometimes it just quits and I have to close and re-start vegas.

I have not had this problem when NOT using assignable FX.

- Joe

Comments

pwppch wrote on 7/8/1999, 8:39 AM
When we scrub - i.e. playback speed is not equal 1.0 - we bypass all FX -
whether Assignable or Bus Insert FX. You should hear only the raw tracks.

Peter


Joe Dupre wrote:
>>I have been working on several variations of the same project, and when I use
the scrubber
>>when there is an assignable FX on the mixer the audio output dies. The clock
keeps running,
>>but there is no output. Sometimes by releasing the scrubber tool the sound
will come back, but
>>sometimes it just quits and I have to close and re-start vegas.
>>
>>I have not had this problem when NOT using assignable FX.
>>
>>- Joe
>>
>>
jdupre wrote on 7/8/1999, 8:25 PM


Peter Haller wrote:
>>When we scrub - i.e. playback speed is not equal 1.0 - we bypass all FX -
>>whether Assignable or Bus Insert FX. You should hear only the raw tracks.

That explains it, as I was routing all track audio through the FX. Thanks.