Comments

pwppch wrote on 7/9/1999, 1:19 PM
I will test this out. Any other details you can offer? (number of tracks,
number of busses, bus routing to hardware, assignable FX/bus insert FX?)

Thanks
Peter


David Ruby wrote:
>>I am still having probs with running tc native waves
>>truverbs.When i have 3 running on seperate tracks/seperate
>>fxchains, the machine slows down and starts to glitch.
>>Pent celeron 366/256sdram/ibm deskstar/optimized.
>>Please help./
drdr wrote on 7/9/1999, 2:40 PM
I am running 10 trcks/2min per track.
I am useing a wavecenter card from frontier designs.* 8 lightpipe
optical.
As far as busses go :A-H are correctly assigned to the wave centercard.
" I " is assigned to my spidfe out on the wavecard correctly.

The recording end of this is fine.
It is when I make a chain fx.
I create Chain fx1,then chain fx2, then chain fx3,.
As soon as I start playback,I hear the effects,but then the music starts
glitching and slowing up in tempo baddly.It can not be even used after this
point.
I have tried everything and would really like to see this go.
I did try beta 3 as well and the same thing occurs.
Thanx ahaed of time.








to Peter Haller wrote:
>>I will test this out. Any other details you can offer? (number of tracks,
>>number of busses, bus routing to hardware, assignable FX/bus insert FX?)
>>
>>Thanks
>>Peter
>>
>>
>>David Ruby wrote:
>>>>I am still having probs with running tc native waves
>>>>truverbs.When i have 3 running on seperate tracks/seperate
>>>>fxchains, the machine slows down and starts to glitch.
>>>>Pent celeron 366/256sdram/ibm deskstar/optimized.
>>>>Please help./
pwppch wrote on 7/12/1999, 9:48 AM

I am attempting a repro.

What FX are you using in your chains? (Number and order is important.)
How are the FX chains routed? (Assignable FX to main busses or Bus Insert FX?)
What if you lower the number of buses you have in your mixer?

Thanks
Peter


David Ruby wrote:
>>I am running 10 trcks/2min per track.
>>I am useing a wavecenter card from frontier designs.* 8 lightpipe
>>optical.
>>As far as busses go :A-H are correctly assigned to the wave centercard.
>>" I " is assigned to my spidfe out on the wavecard correctly.
>>
>>The recording end of this is fine.
>>It is when I make a chain fx.
>>I create Chain fx1,then chain fx2, then chain fx3,.
>>As soon as I start playback,I hear the effects,but then the music starts
>>glitching and slowing up in tempo baddly.It can not be even used after this
>>point.
>>I have tried everything and would really like to see this go.
>>I did try beta 3 as well and the same thing occurs.
>>Thanx ahaed of time.
>>
>>
>>
>>
>>
>>
>>
>>
>> to Peter Haller wrote:
>>>>I will test this out. Any other details you can offer? (number of tracks,
>>>>number of busses, bus routing to hardware, assignable FX/bus insert FX?)
>>>>
>>>>Thanks
>>>>Peter
>>>>
>>>>
>>>>David Ruby wrote:
>>>>>>I am still having probs with running tc native waves
>>>>>>truverbs.When i have 3 running on seperate tracks/seperate
>>>>>>fxchains, the machine slows down and starts to glitch.
>>>>>>Pent celeron 366/256sdram/ibm deskstar/optimized.
>>>>>>Please help./
drdr wrote on 7/12/1999, 10:54 AM
I am using 1# tc native reverb on first assignable fx to bus insert fx,then
another
on second assignable fx bus insert fx.
I then have 2 tracks using the first assignable fx bus insert.
And another track using the second assignable fx bus insert.
So as far as no. of effects I am really only using the tc native reverb,just
routing this to two diff. assign.fx bus inserts on the tracks.
I hope it would not stutter and glitch with only 3 tracks running the verb send.
I hope this is clearer for you.Thanx peter.
dar

Peter Haller wrote:
>>
>>I am attempting a repro.
>>
>>What FX are you using in your chains? (Number and order is important.)
>>How are the FX chains routed? (Assignable FX to main busses or Bus Insert FX?)
>>What if you lower the number of buses you have in your mixer?
>>
>>Thanks
>>Peter
>>
>>
>>David Ruby wrote:
>>>>I am running 10 trcks/2min per track.
>>>>I am useing a wavecenter card from frontier designs.* 8 lightpipe
>>>>optical.
>>>>As far as busses go :A-H are correctly assigned to the wave centercard.
>>>>" I " is assigned to my spidfe out on the wavecard correctly.
>>>>
>>>>The recording end of this is fine.
>>>>It is when I make a chain fx.
>>>>I create Chain fx1,then chain fx2, then chain fx3,.
>>>>As soon as I start playback,I hear the effects,but then the music starts
>>>>glitching and slowing up in tempo baddly.It can not be even used after this
>>>>point.
>>>>I have tried everything and would really like to see this go.
>>>>I did try beta 3 as well and the same thing occurs.
>>>>Thanx ahaed of time.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> to Peter Haller wrote:
>>>>>>I will test this out. Any other details you can offer? (number of tracks,
>>>>>>number of busses, bus routing to hardware, assignable FX/bus insert FX?)
>>>>>>
>>>>>>Thanks
>>>>>>Peter
>>>>>>
>>>>>>
>>>>>>David Ruby wrote:
>>>>>>>>I am still having probs with running tc native waves
>>>>>>>>truverbs.When i have 3 running on seperate tracks/seperate
>>>>>>>>fxchains, the machine slows down and starts to glitch.
>>>>>>>>Pent celeron 366/256sdram/ibm deskstar/optimized.
>>>>>>>>Please help./
pwppch wrote on 7/14/1999, 4:34 PM
We are trying to repro. So far no luck.

As soon as we learn anything, I will get back to you.

Peter


David Ruby wrote:
>>I am using 1# tc native reverb on first assignable fx to bus insert fx,then
>>another
>>on second assignable fx bus insert fx.
>>I then have 2 tracks using the first assignable fx bus insert.
>>And another track using the second assignable fx bus insert.
>>So as far as no. of effects I am really only using the tc native reverb,just
>>routing this to two diff. assign.fx bus inserts on the tracks.
>>I hope it would not stutter and glitch with only 3 tracks running the verb
send.
>>I hope this is clearer for you.Thanx peter.
>>dar
>>
>>Peter Haller wrote:
>>>>
>>>>I am attempting a repro.
>>>>
>>>>What FX are you using in your chains? (Number and order is important.)
>>>>How are the FX chains routed? (Assignable FX to main busses or Bus Insert
FX?)
>>>>What if you lower the number of buses you have in your mixer?
>>>>
>>>>Thanks
>>>>Peter
>>>>
>>>>
>>>>David Ruby wrote:
>>>>>>I am running 10 trcks/2min per track.
>>>>>>I am useing a wavecenter card from frontier designs.* 8 lightpipe
>>>>>>optical.
>>>>>>As far as busses go :A-H are correctly assigned to the wave centercard.
>>>>>>" I " is assigned to my spidfe out on the wavecard correctly.
>>>>>>
>>>>>>The recording end of this is fine.
>>>>>>It is when I make a chain fx.
>>>>>>I create Chain fx1,then chain fx2, then chain fx3,.
>>>>>>As soon as I start playback,I hear the effects,but then the music starts
>>>>>>glitching and slowing up in tempo baddly.It can not be even used after
this
>>>>>>point.
>>>>>>I have tried everything and would really like to see this go.
>>>>>>I did try beta 3 as well and the same thing occurs.
>>>>>>Thanx ahaed of time.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> to Peter Haller wrote:
>>>>>>>>I will test this out. Any other details you can offer? (number of
tracks,
>>>>>>>>number of busses, bus routing to hardware, assignable FX/bus insert FX?)
>>>>>>>>
>>>>>>>>Thanks
>>>>>>>>Peter
>>>>>>>>
>>>>>>>>
>>>>>>>>David Ruby wrote:
>>>>>>>>>>I am still having probs with running tc native waves
>>>>>>>>>>truverbs.When i have 3 running on seperate tracks/seperate
>>>>>>>>>>fxchains, the machine slows down and starts to glitch.
>>>>>>>>>>Pent celeron 366/256sdram/ibm deskstar/optimized.
>>>>>>>>>>Please help./