Vegas and Yamaha DS2416 DSP Factory

tolerpro wrote on 7/12/1999, 1:28 AM

Peter,

I finally got things reorganized in my studio and got Vegas
installed yesterday - Looks great! I can hardly wait for
the released version. Most of the features I was
anticipating being missing are already in and beautifully
implemented. Great Job!

I am attempting to run the Vegas beta under Windows NT 4.0
with Service Pack 3 and the Direct Media 6.0 package using
the brand new NT drivers for the Yamaha DSP Factory. Both
Vegas and Sound Forge go through the motions of playback
but no sound is present on the selected output(s) of the
DS2416.

Do you have any experience with these new drivers or am I
pushing the envelope here expecting this to work?

Thanks for making this package available to a critical
public at such an early stage!

Brian Woodard,
Toler Productions

Comments

pwppch wrote on 7/12/1999, 9:43 AM

I am messing with the new DSP NT drivers as I write this. I will let you know
what I discover.

No sound? Forge also? Have you tried LUI or one of the other "console" apps for
the DSPF to route/control the card?

Thanks,
Peter

Brian Woodard wrote:
>>Peter,
>>
>>I finally got things reorganized in my studio and got Vegas
>>installed yesterday - Looks great! I can hardly wait for
>>the released version. Most of the features I was
>>anticipating being missing are already in and beautifully
>>implemented. Great Job!
>>
>>I am attempting to run the Vegas beta under Windows NT 4.0
>>with Service Pack 3 and the Direct Media 6.0 package using
>>the brand new NT drivers for the Yamaha DSP Factory. Both
>>Vegas and Sound Forge go through the motions of playback
>>but no sound is present on the selected output(s) of the
>>DS2416.
>>
>>Do you have any experience with these new drivers or am I
>>pushing the envelope here expecting this to work?
>>
>>Thanks for making this package available to a critical
>>public at such an early stage!
>>
>>Brian Woodard,
>>Toler Productions

tolerpro wrote on 7/12/1999, 5:27 PM

Peter,

I wasn't sure if LUI would work under NT so I hadn't tried it yet. I'll let
you know tonight what happens. ds2416ck (the checkout applet provided by
Yamaha) reports "OK" and generates 1K tones but that's the only sound I've been
able to get so far under NT (works fine under Win95B).

I noticed late last night that the default error sound was beeping the PC
speaker which indicates to me something is missing from the NT driver chain. I
suspect I may have botched something on the install so I'm going to give the
whole setup another go. I'll keep you posted.

Thanks for the input!

Brian

P.S. Does the PC ID string change if I reformat the Hard drive?

---

Peter Haller wrote:
>>I am messing with the new DSP NT drivers as I write this. I will let you know
>>what I discover.
>>
>>No sound? Forge also? Have you tried LUI or one of the other "console" apps
for
>>the DSPF to route/control the card?
>>
>>Thanks,
>>Peter

pwppch wrote on 7/12/1999, 6:46 PM

I think that reformating the harddrive will change the PC ID we use.

Peter

Brian Woodard wrote:
>>Peter,
>>
>>I wasn't sure if LUI would work under NT so I hadn't tried it yet. I'll let
>>you know tonight what happens. ds2416ck (the checkout applet provided by
>>Yamaha) reports "OK" and generates 1K tones but that's the only sound I've
been
>>able to get so far under NT (works fine under Win95B).
>>
>>I noticed late last night that the default error sound was beeping the PC
>>speaker which indicates to me something is missing from the NT driver chain.
I
>>suspect I may have botched something on the install so I'm going to give the
>>whole setup another go. I'll keep you posted.
>>
>>Thanks for the input!
>>
>>Brian
>>
>>P.S. Does the PC ID string change if I reformat the Hard drive?
>>
>>---
>>
>>Peter Haller wrote:
>>>>I am messing with the new DSP NT drivers as I write this. I will let you
know
>>>>what I discover.
>>>>
>>>>No sound? Forge also? Have you tried LUI or one of the other "console" apps
>>for
>>>>the DSPF to route/control the card?
>>>>
>>>>Thanks,
>>>>Peter
>>

tolerpro wrote on 7/13/1999, 12:50 PM

Peter,

I meticulously re-installed NT 4.0 last night along with service pack 3 and the
new DS2416 drivers. Still no sound. I was curious what kind of behavior
you're observing. If you are getting sound, I guess I need to contact Yamaha.

Thanks!

Brian

Peter Haller wrote:
>>I am messing with the new DSP NT drivers as I write this. I will let you know
>>what I discover.
>>
>>No sound? Forge also? Have you tried LUI or one of the other "console" apps
for
>>the DSPF to route/control the card?
>>
>>Thanks,
>>Peter
>>
>>