• Audio

  7 answers, most recent on 6/30/2025

  RE: HELP Requested: Why is my Track AudioFX getting PRE-fade levels?
  Wouldn't enabling "auto gain" raise the noise floor floor too during non-tapping Yes and no, it would depend on Track Compressor's Threshold setting.btw, if you have the legacy Wave Hammer DX plug-in which is included with Sound Forge Pro and some
• Video

  8 answers, most recent on 6/30/2025

  RE: Video Envelope - Velocity - cannot set to 100%
  Thanks, I was not able to find the "normal". Was looking for numbers =)P.S I tried to increase the track height, it was a half of my screen and that did not help.
• Video

  9 answers, most recent on 7/4/2025

  RE: Select entire track without going to beginning
  @JanVanBekkum When you click with the mouse, left click & hold, then right click will give you different lasso options. I have a script that selects all in the chosen track. Copy & paste this into a notepad file with .cs as it's extension,
• Audio

  No answers, created on 6/22/2025

  Audio Track Loop-Record Modes
  I've been recording guitar in Vegas Pro 22 by setting a loop range in a song and capturing one section at a time. If I don't like a take, I just let it loop around and record again. When I bring the track into Sound Forge, I see that Vegas has kept
• Video

  3 answers, most recent on 6/28/2025

  RE: Moving Face Cam
  The approach I take is similar to above but I find Picture In Picture fx the most convenient. More so than Track Motion. Or pan/crop on the event. Although with a little more work, you might get higher quality with pan/crop.
• Video

  3 answers, most recent on 7/4/2025

  RE: Differing aspect ratios for Picture in Picture
  Howdy. Professional video mapper here... Typically, you want 1920x1200, it's very rare to find a projector with a 1920x1080 native resolution, most are 16:10 aspect ratio. As for your question, I'd suggest using track motion vs. picture in picture.
• Video

  7 answers, most recent on 6/24/2025

  RE: 3 Blank frames when splitting a vid to insert another
  Project Frame Rate: Custom (1920x1080, 59.940 fps) Turned on Show Unquantized Event Edges and lots of red lines. It's odd that, except for tracks 108 and 109, the audio tracks, I don’t have any red lines after track 88 @ 3:27 in a 20-minute video,
• Scripting

  4 answers, most recent on 6/19/2025

  Audio Channels both
  Hello,   @jetdv   Is it possible to set audio channels of audio track event to both in C# ? Can you help me?Thank you in advance Regards Marcin
• Video

  9 answers, most recent on 7/4/2025

  RE: Select entire track without going to beginning
  This I didn't understand "When you click with the mouse, left click & hold, then right click will give you different lasso options". I wan't clear where to click. The first script (posted by Gid) works well vor me: it selects all events on a
• Audio

  10 answers, most recent on 7/14/2025

  Random part of audio track at start of render
  I have been using Vegas Pro 19, which I purchased in 2022. I read some while back that others were also having problems with bits of random audio at the start and/or end of their rendered videos. Was this issue ever resolved?
• Scripting

  12 answers, most recent on 7/11/2025

  RE: enable Multicamera script
  @jetdv @Thiago_Sase Is it possible in Vegas to turn off prompt question after running "Create multicamera track". I mean this question: "Some items (such as evelopes, effects, or motion) will be lost during this operation. Continue?" I know that
• Audio

  12 answers, most recent on 7/7/2025

  Applied effects are disabled when changing the playback rate
  When I add any effects to the audio track, they work at a speed of 1.00. But when I change the speed using the slider located in the lower left corner, the applied effects are disabled. How can I make them not be disabled?
• Audio

  7 answers, most recent on 6/30/2025

  RE: HELP Requested: Why is my Track AudioFX getting PRE-fade levels?
  Wouldn't enabling "auto gain" raise the noise floor floor too during non-tapping Yes and no, it would depend on Track Compressor's Threshold setting.btw, if you have the legacy Wave Hammer DX plug-in which is included with Sound Forge Pro and some
• Video

  57 answers, most recent Yesterday

  RE: VEGAS Pro 22 Build 250 General Discussion
  Hi, I'm working with original songs and wanted to add captions and this is a lot easier if you have a separate vocal track and using the "AI Speech to text" function, but why does it add an ending dot on each line? I wish I knew a better way since I
• Scripting

  12 answers, most recent on 7/11/2025

  RE: enable Multicamera script
    Is it possible in Vegas to turn off prompt question after running "Create multicamera track". I mean this question: "Some items (such as evelopes, effects, or motion) will be lost during this operation. Continue?" @marcinzm I have that doubt too.
• Video

  8 answers, most recent on 6/30/2025

  RE: Video Envelope - Velocity - cannot set to 100%
   I was not able to find the "normal" I tried to increase the track height, it was a half of my screen and that did not help. That's odd - it's worked for me for years with both video and audio envelopes.
• Audio

  6 answers, most recent on 7/3/2025

  RE: ways to convert audio from mono to stereo?
  @target This script will change selected events from stereo to mono. Go to C:\Users\'name'\OneDrive\Documents\Vegas Script Menu, duplicate (copy & paste) one of the cs files, rename it keeping the .cs extension at the end & replace the
• Audio

  4 answers, most recent on 6/29/2025

  RE: How To Select Multiple Automation Points on an Audio Bus?
  The envelope edit tool seems to work the same for me on the sub-master buses as it does on tracks.. including selecting a region and dragging multiple envelope points (Win 10, Vegas 22, build 248). This may be another issue but I did have problems
• Video

  9 answers, most recent on 6/26/2025

  [Closed] ACES/32-full & sLOG3
  Am I crazy or is Vegas applying all clip/track/bus-level fx before the transform from sLog3 to REC709 inc CG Panel? There's no way to grade footage with this behavior! sLOG3 footage on 32FR timeline clip-->properties-->color space
• Video

  9 answers, most recent on 7/14/2025

  RE: Extending Audio Echo
  So if you apply the Reverb effect to the 'Track' and not the Clip, it will train off normally like you'd expect reverb to, is that correct?But when applying it to the clip/event it cuts off at the end of the clip/event?If that's the case, I see how
• Audio

  10 answers, most recent on 7/14/2025

  RE: Random part of audio track at start of render
  I don't understand then what "Random part of audio track at start of render" means- doesn't random mean it is audio from a random place on the timeline? There was an issue with noise at the end of certain audio events (never experienced it myself).
• Scripting

  12 answers, most recent on 7/11/2025

  enable Multicamera script
  Hello, @jetdv Is it possible to turn on/enable Multicamera view by script in C#? If no, is it any other possible way to enable this via script? I didn`t see any similar methods in documentation. I would like script to do these things: a) CTRL +
• Audio

  12 answers, most recent on 7/7/2025

  RE: Applied effects are disabled when changing the playback rate
  Yes, I can hear the FX dropout now. I used Volume FX as my non musical ears can detect a reduction in volume. Also I placed a mp3 music file on the track instead of ac3 audio camera clips. Interestingly although the FX mutes itself it doesn't untick
• Audio

  12 answers, most recent on 7/14/2025

  RE: Increase the volume of quiet sounds and decrease the loud sounds?
  ,Hi @ryan-hall34See the recent topic, which deals with a similar issue or erratic levels. In this case, I recommended the legacy Wave Hammer plug-in which is a two-stage comp/limiter with an auto gain option in the first stage which is controlled by