Search the VEGAS Community for tutorials, questions and solutions as well as for forum members

It does not seem to be only Vegas having problems with the file. Even VLC cannot read/play the XAVC MXF file. VLC error message. No suitable decoder module: Avidemux 2.6 chokes as well. MediaInfo report for anyone interested. General Complete

Vegas Movie Studio (up to ver. 17)

12 answers, most recent on 9/5/2014

RE: 24p versus 60p

If your camera can shoot 1080p at 60fps, and you have enough space on your memory card, then shoot like that. (Also take into account the bitrate, because this is the determinant factor for file size). You get the best results for slow motion. As

DVD Architect

10 answers, most recent on 8/15/2014

Incorrect display from DVDA menu structure

My project has one main menu and 3 sub-menus. Each of the sub-menus was created using the Insert Scene Selection Menu function. When I use the DVDA Preview function everything works A-OK. But when I make an ISO file and load the file into DVDFab

Video

2 answers, most recent on 7/7/2014

V12 unable to create BD (Cured)

I haven't been using V12 b770 for a while but now I want to it's having fits. It's been locking up my pc regularly which I can get around by re-booting but now it will not create a 1920 x 1080 24p BD file. First I create the AC3 5.1 then I do the

Video

11 answers, most recent on 6/26/2014

24/96 Audio files not being rendered by Vegas 13

I am trying to figure out why Sony Vegas 13 (Build 310, 64 bit) won't render 24/96 audio on the timeline. I put numerous 24/96 audio .flac files on the timeline and "render as" to Microsoft .wav with the following output parameters: = 96,000 Hz,

Video

17 answers, most recent on 6/13/2014

RE: Stability - lucky 13 vs 12 vs 11?

[I]@24Peter, I haven't heard about that "parameters unsupported" issue before. Can you offer any more details?[/I] Not really - it happens randomly and infrequently when I go to render a file from what I can tell. First time it happened I saved a

Video

33 answers, most recent on 6/10/2014

RE: Sony Vegas Pro 13 don't display (DNxHD format) ?

I carefully say it is the number of clips. I transcoded a 180 clips to DNxHD 220 10bit and tried to put as many as I can into a new project. Like Zayed, VP13 crashed somewhere around 50 clips. Since it crashed and I was unable to count the number of

Vegas Movie Studio (up to ver. 17)

49 answers, most recent on 8/25/2014

RE: Studio 13 crashing at startup...

Did you see this answer to that amdocl64.dll error? http://forums.creativecow.net/thread/24/951512

Video

10 answers, most recent on 5/28/2014

RE: Vegas Pro 13 Crash on startup

I have installed on the same PC, Vegas Pro 12 (and never I have had problems, and stiil works), JRiver Media Center 19, GoPro Studio, but I need all these SW (excluding Vegas Pro 12, once I can start Vegas Pro 13, until I cannot start Pro 13, I

DVD Architect

6 answers, most recent on 4/24/2014

RE: Audio Out of Sync with Video

Thank you ChristoC for the information. I do have a couple of questions, though: 1) Was the wrong choice of storage media the cause of the audio/video out of synchronization? 2) Why these templates(DVDA NTSC video stream and Program stream NTSC)

DVD Architect

6 answers, most recent on 4/24/2014

Audio Out of Sync with Video

Hello Everyone, I am attempting to create blu-ray discs from some old lecture clips (mp4 format), which I have lost the original source videos. I'm using Vegas Pro 12.0 and DVD Architect Pro 6.0 products for the project. The rendering templates of

Video

3 answers, most recent on 4/19/2014

RE: Cannot finish downloading Microsoft .NET Framework

Thanks, that worked. Now I have another problem actually running Pro 13, which is that I get a massive "Vegas Pro has stopped working" error. Here's what it says (edit: Uninstalling Vegasaur fixed this). Extra Information File:

Video

One answer, on 4/16/2014

Mercalli disabled during render to Sony AVC 720p

Anyone have this problem? While rendering out to Sony AVC 720p, when the render gets to my 1080i HDV clips the error of having to re-stabilize pops up about half way through the clip. I didn't catch it in DVDA before I burned to BD, but it sure

Video

11 answers, most recent on 3/30/2014

RE: Advice on PCM audio for Blu-ray

Thanks for the reply john, but which Wav format in the drop down list do you use? Sony Wave64, Scott Studios Wave, or Microsoft Wave? John EDIT: Looks like people in the past have recommended Microsoft Wave, but the maximum file size limit is

Vegas Movie Studio (up to ver. 17)

8 answers, most recent on 3/29/2014

Cannot open .avi file codec error

As above. I had K-lite installed and have uninstalled it then done a registry clean then re-installed Movie Studio Platinum 13. Still not working. Mediainfo gave me this not sure what half of it means ;). eneral Complete name

Video

53 answers, most recent on 3/25/2014

RE: Add clips to T/L using their timecode.

On Absolute Frames...I just want to point out that when you're looking at Absolute Frames, its a measure of timeline frames, not media frames. The Absolute Frames count depends on your project's framerate. It's a minor distinction but take from it

Video

19 answers, most recent on 3/20/2014

RE: WOT: drive letters

@ECHO OFF :: CURDRIVE.BAT :: :: Substitutes CURDRIVE with NEWDRIVE :: SET NEWDRIVE=B :: SET CURDRIVE= CD | CHOICE /C:ABCDEFGHIJKLMNOPQRSTUVWXYZ > NUL IF ERRORLEVEL 1 SET CURDRIVE=A IF ERRORLEVEL 2 SET CURDRIVE=B IF ERRORLEVEL 3 SET

Video

16 answers, most recent on 3/18/2014

RE: How to make NATURAL looking green-screening?

To add to the other good advice given: In addition to the issue of lighting the bottom leg and feet appropriately to match the reflectivity of the background plate surface while eliminating green spill (which is difficult in itself in a semi-pro

Video

40 answers, most recent on 2/18/2014

RE: Verbatim Printable DVD+R DL p/n 98319

The topic of optimal burn speed seems to be a perennial that just keeps coming back. I have always maintained that it makes little difference if the burner is operating correctly and uses a suitable methodology for a particular disk. BUT in the

Vegas Movie Studio (up to ver. 17)

No answers, created on 2/6/2014

Editing DVB recordings

Hello, I have a few recordings from a DVB HD recorder that I want to edit in Movie Studio 11 Platinum. Goal is to take only a few scenes from each recording and output a single "master" for different devices incl. iPad, Blu-Ray and DVD. I can access

Video

31 answers, most recent on 3/24/2014

RE: Vegas Pro 12 Build 770 - Crashing Constantly

You are not alone. SVP 10 led me to switch from Media Composer. If I would have known all the heartache I would go through in the next two years with SVP 11 & 12, I never would have switched. However, I believe there are many times more

Vegas Movie Studio (up to ver. 17)

19 answers, most recent on 10/20/2014

.MOV files “break” Sony Movie Studio 12

.MOV files “break” Sony Movie Studio 12 – Black video preview and renders Sony Movie Studio 12.0 is consistently showing a black preview screen and black rendering of .MOV clips after I put a certain number of source files in my project media bins

Video

12 answers, most recent on 6/6/2022

RE: Getting a weird error when creating Blu-Ray image

Hi Adam -- Here's some info: 1. There are two files on the timeline - one is an m2t file that I recorded on my Canon XH-A1 HDV camera. The other is a 48K/24-bit WAV file. The video is of a local band concert. 2. Vegas Pro 11 seems to still be

Video

One answer, on 1/10/2014

ReStream utility

Some of you may not know of this utility, hence the post. I recently wished to copy the movies from some DVDs recorded by a friend's DVD recorder. However, the concatenated VOB files, whether performed by Copy /b or VOB2MPG, appeared to be 4:3