• Video

  7 answers, most recent on 7/7/2018

  More 4K test.
  I was ask by a forum member here to do another 4K test with task manager open. So, here it is a short sample show timeline performance, 2 track multicam editing and redering to AMD VCE. https://vimeo.com/278019605
• Vegas Movie Studio (up to ver. 17)

  One answer, on 6/29/2018

  RE: Multicam Editing - a trap for the unwary! (VMS 15 - Build 116)
  You may have selected a track header, which selects all events residing on the track. A big tip for you is to render all assets to a new track(s) before creating your Multicam track from the first set.
• Vegas Movie Studio (up to ver. 17)

  One answer, on 6/29/2018

  Multicam Editing - a trap for the unwary! (VMS 15 - Build 116)
  I'm editing a long concert on VMS15 using the multicam facility with the maximum number (4 for VMS) of cameras. Every now and again I have looked at the timeline and found a whole load of shot segments have been all the same take, despite me having
• Video

  25 answers, most recent on 6/15/2018

  RE: Real-time Playback
  @fr0sty A few hours for 5 x 4K camera footage? If so, it's not so bad but, in the past, I had let Vegas Pro 14 create one and it took a few hours just for one 4K footage (XAVC S) of about 2 hour length, since which time I hesitate to work with
• Video

  25 answers, most recent on 6/15/2018

  RE: Real-time Playback
  I rendered out those proxies in a few hours. Not long in comparison to the days I'll spend cutting, color correcting, color grading, noise reducing, rendering, etc., and since editing without the proxies brings my system to a crawl in multicam mode,
• Video

  25 answers, most recent on 6/15/2018

  RE: Real-time Playback
  It isn't as good, I use proxies if I'm going to do multicam mode. This video was cut in that mode, actually, I just disabled it so I could have fullscreen playback, since you can't see my full screen output on the other monitor.
• Video

  25 answers, most recent on 6/15/2018

  RE: Real-time Playback
  @fr0sty, that's looking really good! I am very curious to know what sort of playback performance you can get when in the multicam edit mode (CTRL+Shift+D). Thanks in advance.
• Video

  336 answers, most recent on 8/3/2018

  RE: VEGAS Pro 15 Update 5 (build 361) - General Discussion
  I tried to edit a multicam performance with the newest Vegas 15 but it kept crashing during the multicam editing. I did it in Vegas 14 and it didn't crash at all. I had two X AVC L and an X AVC S video file. The X AVC L from Sony PXW-X70, Sony
• Video

  8 answers, most recent on 6/3/2018

  RE: 4K multicam no problem!!
  OK here we go!! The footage is native GH5 10 bit 4K 400mbps. My system can handle 2 tracks in multicam editing with 32 bit project settings and FXs applied. Play back TL performance is good, best/full frame rate. But when I start to add 2 more
• Video

  8 answers, most recent on 6/3/2018

  RE: 4K multicam no problem!!
  OK here we go!! The footage is native GH5 10 bit 4K 400mbps. My system can handle 2 tracks in multicam editing with 32 bit project settings and FXs applied. Play back TL performance is good, best/full frame rate. But when I start to add 2 more
• Video

  336 answers, most recent on 8/3/2018

  RE: VEGAS Pro 15 Update 5 (build 361) - General Discussion
  I tried to edit a multicam performance with the newest Vegas 15 but it kept crashing during the multicam editing. I did it in Vegas 14 and it didn't crash at all. I had two X AVC L and an X AVC S video file. The X AVC L from Sony PXW-X70, Sony
• Video

  8 answers, most recent on 6/3/2018

  4K multicam no problem!!
  I am showing you a short video with 32 bit project settings 4K multicam editing in VP15 new build. No problem, sailing as smooth as its get. https://vimeo.com/273154780  
• Video

  7 answers, most recent on 6/3/2018

  RE: GPU Test (3 4 K files, 20 seconds, each file 4 different GPU FX effect
  @D7K, I am curious about your GPU timeline performance in multicam edit mode as I use a similar GPU (RX580). Suppose you stack, say, 4 tracks of the 4K 100mb UHD from your Panny GX8 and create a multicam track, what sort of preview playback
• Video

  336 answers, most recent on 8/3/2018

  RE: VEGAS Pro 15 Update 5 (build 361) - General Discussion
  It looks like VEGAS Pro 15 (b361) does not like to have both VCE and QSV enabled simultaneously, at least, on my PC. I disabled iGPU (HD530) on the Intel i7 6700K in BIOS, and VEGAS Pro 15 (b361) finally managed to get through the VCE render. Speed
• Video

  31 answers, most recent on 5/28/2018

  RE: Are MOV files ok to use in Vegas 15 now?
  Cliff. Check out the new thread I post about .MOV files. You can see it for yourself. You are wasting to much times for doing conversion. Back in the day, many people using an intermediate because back then computer/graphic card are not as powerful
• Video

  22 answers, most recent on 5/25/2018

  RE: Is Vegas to Handbrake still necessary for v15?
  Probably I'm missing something important. Probably. Every year we record our figure skating live performance of the Nutcracker on Ice. Each act is between 30-50min with several scenes. Each act is a multicam, 3-4 cam edit and some parents buy the
• Video

  13 answers, most recent on 5/16/2018

  RE: Render to New track
  Without fail, I use it to create a set of durable backup tracks BEFORE creating a Multicam editing workspace.
• Video

  4 answers, most recent on 5/11/2018

  RE: Multicam Crashing
  To me, yess.Why do you think the first warning at Multicam editing is:
• Video

  4 answers, most recent on 5/11/2018

  RE: Multicam Crashing
  So, I checked my project settings, and noticed the project had been set to the settings of the first clip I used, the 720p60 clip. I changed the project settings to 1080p24, left everything else alone. That seems to have fixed the problem. So, if
• Video

  4 answers, most recent on 5/11/2018

  Multicam Crashing
  I've been trying for days to get a project finished and can't seem to get more than a few minutes of editing in before Vegas crashes. I have 4 cameras in this shoot. Here is the media info for each camera: Cam1: General  Name: 00070.MTS  Folder:
• Video

  267 answers, most recent on 9/24/2018

  RE: VEGAS Pro 15 Update 4 (build 321) - General Discussion
  “I just lost 4 hours of progress to a multicam editing crash, auto save saved 5 mins after I started the project” Well Fr0sty if you’re using Vegas for 20 years you know a hell of a lot more about it than I do! I’m a relative newcomer, started with
• Video

  267 answers, most recent on 9/24/2018

  RE: VEGAS Pro 15 Update 4 (build 321) - General Discussion
  “The problem is, we aren't only looking the current issues... we're looking at old bugs that have been around for years, and old features that haven't been updated in years. When they do get updated or added, they are often buggy.” Thats the nature
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 5/10/2018

  RE: Multicam help-Vegas Movie Studio 15
  I cannot get the Multicam function to work at all -the "create Multicamera track" button is grayed out-I have three videos on the timeline and I have hi-lighted them all-the "enable multicamera editing button has been checked-I have followed youtube
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 5/10/2018

  Multicam help-Vegas Movie Studio 15
  I cannot get the Multicam function to work at all -the "create Multicamera track" button is grayed out-I have three videos on the timeline and I have hi-lighted them all-the "enable multicamera editing button has been checked-I have followed youtube