• Video

  3 answers, most recent on 4/29/2013

  RE: Can't read DVCPro HD file from Mac
  The back story is I'm trying to help out a local theater that purchased a 3-camera remote control switching system that feeds to a BlackMagic Decklink Extreme 3d card on a Mac. They got the system, but no one told them how to use it, so I
• Video

  3 answers, most recent on 4/29/2013

  Can't read DVCPro HD file from Mac
  I was given a file recorded using the QuickTime DVCPro HD codec on a Mac using a Blackmagic Decklink Extreme capture card at 1080i59.94. VLC will play it on my PC, but Vegas 12 doesn't open the video stream. I do get the audio, though. What am I
• Video

  28 answers, most recent on 4/14/2013

  RE: Help with Blackmagic Design Intensity Pro card
  For me it was a driver issue. I had the older Blackmagic driver 9.0.0 installed - have yet updated to the latest driver 9.7.1., and now it works also with build 563. Even if I have to state that 1080 50p projects work fine with a 720 50p preview
• Video

  28 answers, most recent on 4/14/2013

  RE: Help with Blackmagic Design Intensity Pro card
  I have the PCI BlackMagic Intensity Pro and it (sort of) works with VPro12 build 563. The preview and trimmer window will output to it and playback will output to it but sometimes - I have not yet established why - it refused to show playback and
• Video

  28 answers, most recent on 4/22/2013

  RE: OT: BlackMagic 4K and "pocket cinema cam"
  "The Blackmagic Pocket Cinema Camera includes a removable and rechargeable lithium ion battery, which provides up to an hour of continuous recording time. The Nikon EL-EN20 battery type is commonly available, so you can purchase multiple batteries
• Video

  28 answers, most recent on 4/14/2013

  RE: Help with Blackmagic Design Intensity Pro card
  from previous thread of same kind of request of the OP Subject: RE: Black Magic Design Intensity - unavailable in v12? Reply by: videoITguy Date: 10/16/2012 10:55:01 AM Ttry to get a hold of forum member -John Cline - he should have experience
• Video

  28 answers, most recent on 4/14/2013

  RE: Help with Blackmagic Design Intensity Pro card
  @Marc S Thanks Marc S. Your post is proof that the Blackmagic Design Intensity Pro card will work with VP 12. Preview Device in VP does not see the card. I just uninstalled the drivers and did a new install--not sure why except hoping for
• Video

  28 answers, most recent on 4/14/2013

  RE: Help with Blackmagic Design Intensity Pro card
  @atom12 I had to install legacy drivers for OHCI Compliant IEEE 1394 for firewire to work. Is this the same drivers you refererence? As I mentioned earlier the Blackmagic contents box appeared to have been opened and absent of a Installation disk
• Video

  28 answers, most recent on 4/14/2013

  RE: Help with Blackmagic Design Intensity Pro card
  While you're waiting for Blackmagic support, I'd try some of the legacy drivers just to see. That was the reason I posted that link, not realizing that the latest one wasn't on there. I switched to AJA several years ago, but back in the days when
• Video

  28 answers, most recent on 4/14/2013

  RE: Help with Blackmagic Design Intensity Pro card
  I cannot say definitely, but BlackMagic support should be able to confirm the following statement " WE HAVE NOT tested the card on a board configuration such as yours." When they issue these statements it means exactly what it says, it does not
• Video

  28 answers, most recent on 4/14/2013

  RE: Help with Blackmagic Design Intensity Pro card
  O.K. I downloaded and installed 9.7 Desktop Video driver. Restarted my computer, but unfortunately VP 12 is not seeing it. I am on build 394 but don't see that build 486 or 563 would make a difference. Perhaps it will not work on my system--Intel
• Video

  28 answers, most recent on 4/14/2013

  RE: Help with Blackmagic Design Intensity Pro card
  You SHOULD KNOW several things. 1) You do need the driver install to be availiable such that on your hardware the card will be recognized. 2) That the card will only work on certain platforms and chipsets. 3) That BlackMagic does not support
• Video

  28 answers, most recent on 4/14/2013

  Help with Blackmagic Design Intensity Pro card
  Hello, Just installed a "BlackMagic-design Intensity Pro" card for my Windows 7 64-bit system. The box arrived today with no CD inside--only an empty CD sleeve and no paperwork or instructions. However, I did install the card making sure I wore an
• Video

  28 answers, most recent on 4/22/2013

  RE: OT: BlackMagic 4K and "pocket cinema cam"
  As compared to the BlackMagic pocket camera, what the GF6 would have would be: 1/ 16 megapixel stills with RAW. 2/ Autofocus with touch, facial recogition and motion following modes. 3/ Articulating touch screen. 4/ Regular Micro 4/3 crop factor
• Video

  28 answers, most recent on 4/22/2013

  RE: OT: BlackMagic 4K and "pocket cinema cam"
  This is one of those products that I'm so glad is there, even though I am not going to use it personally. For now I am incredibly happy with my GH3 and growing to love my little GoPro 3 Black as well. I am happy any time a product comes along that
• Video

  28 answers, most recent on 4/22/2013

  RE: OT: BlackMagic 4K and "pocket cinema cam"
  I have the Blackmagic Cinema Camera (BMCC) and love it so far. Beautiful image and the raw image is just so smooth. So much latitude. Bob's right. Moving a lot of data around. I'm working on a documentary and thought about not shooting raw. But,
• Video

  28 answers, most recent on 4/22/2013

  OT: BlackMagic 4K and "pocket cinema cam"
  http://www.hollywoodreporter.com/behind-screen/nab-blackmagic-launches-4000-4k-434706 Yeah, yeah 4K... but the $995 cam - Super 16 sized sensor with micro2/3 lenses. I think they'll move a lot of those.
• Scripting

  4 answers, most recent on 6/2/2013

  RE: Script to add timecode to (some) QuickTime files
  This script is now unnecessary for VP12 Build 563. Build 563 appears to fix the issue with reading timecodes in QuickTime files created by both Resolve and the Blackmagic Cinema Camera. However, there still seems to be an issue reading timecodes in
• Video

  48 answers, most recent on 4/12/2013

  RE: New 563 Build
  Unfortunately, the timecode issue with QuickTime files appears to be only partially fixed. To be fair, it isn't clear if this is due to the camera or to VP12 or to QuickTime. The timecode seems to be read fine for .mov files created by Resolve and
• Video

  5 answers, most recent on 4/5/2013

  RE: what video capture card to buy to record from DVR?
  You may be going places you really don't want to go. Consider the outputs of your chosen broadcast receiver device. 1) You are probably correct the HDMI will have protect. a no go 2) You cannot really record component without getting overly complex.
• Video

  5 answers, most recent on 4/5/2013

  what video capture card to buy to record from DVR?
  have a need to record some material from broadcast TV, and then edit inside vegas pro 12. The Verizon Fios dvr box that has the material has hdmi out as well as component. Material was recorded in HD. The HDMI output from the fios dvr is probably
• Video

  55 answers, most recent on 9/9/2023

  RE: Using XML Export in Vegas Question
  For anyone that cares: I've posted a script here that infers the timecode from Blackmagic Cinema Camera files and sets the custom timecode in VP12 to the correct timecode. It seems to work for both QuickTime (DNxHD) files from the camera and
• Scripting

  4 answers, most recent on 6/2/2013

  Script to add timecode to (some) QuickTime files
  The purpose of this post is twofold: 1. To provide a script that solves a problem (that admittedly probably plagues only a few people). Code is below. 2. To ask for help in accessing QuickTime from within a script (to get a QuickTime timecode from
• Video

  2 answers, most recent on 3/24/2013

  RE: XML and EDL concerns summary database
  The following post goes into some depth about handling the new BlackMagic Design camera files and use of Cineform for transcode. Transcoding to a format that an NLE should read and write is an important step to crossing and roundripping in different