• DVD Architect

  One answer, on 6/27/2008

  Exception Error
  I'm not sure if this problem is addressed in another thread (I checked back a few hundred posts and didn't find this issue). I'm using DVD Architect 4.5c and have used it successfully in the past. Recently when I try to burn a DVD as soon as I
• Audio

  No answers, created on 6/24/2008

  big problems
  I have an audio card with a recording unit, it is STA DSP24/MKII . My Vegas 4.0 is constantly having problems with it. At this point, at playback when the card is selected as audio device it merely plays high frequency static. Also at priming
• Video

  7 answers, most recent on 6/25/2008

  Vegas 8b lockup on HDV render
  My first use of V8b and first HDV edit project and my first Vegas render lockup ever since V4. I'm trying to render a 30 second video intro in V8b, in took 2 hours to get 39% complete, then hung there for another 2 hours doing no progress. I had
• Video

  20 answers, most recent on 7/1/2008

  RE: Freezes, hangs & crashes
  Vegas 8b lockup on HDV render My first use of V8b and first HDV edit project and my first Vegas render lockup ever since V4. I'm trying to render a 30 second video intro in V8b, in took 2 hours to get 39% complete, then hung there for another 2
• Video

  One answer, on 6/23/2008

  RE: problems with automatic crossfade
  Here are the error details: Sony Vegas Pro 8.0 Version 8.0b (Build 217) Exception 0xC0000005 (access violation) READ:0xD0000401 IP:0xD0000401 Thread: VideoRender ID=0x584 Stack=0xF91D000-0xF920000 Registers: EAX=01cfffff CS=0023 EIP=d0000401
• Video

  7 answers, most recent on 6/15/2008

  RE: Error AFter 12% Rendering MPEG for Architect
  OK, another update on my troubleshooting. I repaired the SP2 install and adding admin rights after getting "Access is denied" messages during the XP SP2 install. I uninstalled Vegas 8b. I defragged the render drive. I reinstalled Vegas 8 Pro with
• Video

  7 answers, most recent on 6/15/2008

  RE: Error AFter 12% Rendering MPEG for Architect
  I've been using Vegas since version 3. You can see examples of my work (all edited with Vegas) shot with two cameras -- Sony DCR-TRV900 and Canon HV 20 more recently on: http://www.vimeo.com/chipgallo http://www.youtube.com/chipgallo I now have
• Video

  32 answers, most recent on 7/31/2008

  RE: Vegas Pro 8.0b Crashes Continuously
  Darren- Below is the error message that I just received when I opened my project. Now, it took me a few times to reproduce this error, because Vegas crashed a few times before getting this error. However, if anyone is able to help with this,
• Video

  7 answers, most recent on 6/15/2008

  Error AFter 12% Rendering MPEG for Architect
  I get an error after 12% complete when rendering from Vegas Pro 8b to an MPEG file for DVD Acrobat 4.5. The system is Windows XP Pro, SP2 on a Quad Core (Intel boxer motherboard) with 4 GB memory. Sony Vegas Pro 8.0 Version 8.0b (Build
• Video

  One answer, on 6/7/2008

  Vegas 7e crash
  I'm getting these error when Vegas crashes. Mean anything to anyone? Sony Vegas 7.0 Version 7.0e (Build 216) Exception 0xC0000005 (access violation) READ:0xFF6452A2 IP:0x6ADC43 In Module 'vegas70.exe' at Address 0x400000 + 0x2ADC43 Thread:
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 6/1/2008

  Program Error
  I'm getting an error with my program. I've tried reinstalling it but it hasn't worked. Sorry it's so long but if anybody else has gotten this can you help. "An exception has occured" and then: Sony Vegas Movie Studio 8.0 Version 8.0c (Build
• Video

  14 answers, most recent on 5/30/2008

  RE: Blank DVDs - I miss the Ritek G04
  One of my media suppliers has a uber expensive CAT scanner, if you're really serious you need one but they're $10K. He's done exhaustive tests mostly on burning audio CDs and the conclusion is that burning at 24x produces the least jitter. When I
• Video

  7 answers, most recent on 5/23/2008

  Mpeg2 Render Error
  Running Vegas 8b on a Dual Quad Precision 740 from Dell. The program is crashing when trying to render an MPEG2. Have any of you gotten this error message before? Sony Vegas Pro 8.0 Version 8.0b (Build 217) Exception 0xC0000005 (access violation)
• Vegas Movie Studio (up to ver. 17)

  19 answers, most recent on 5/22/2008

  RE: PC hang when loading mpg files to project media
  Hi Ivan, My hardisks all formated under NTFS. I don't have mpg file size with more than 1GB. Just to remind you that I am having total mpg files size 9.24 GB (318 files). I just tried to create the new project file and followed your instructions.
• Video

  No answers, created on 5/15/2008

  20+ QT H.264F files crash Vegas consistently
  I have been dealing with this for some time now. Sony Vegas 8.0b Quicktime 7.4.1 & 7.4.5 The placement and use of QT H.264 files on the time line works fine until I reach about twenty-five or so. Then Vegas crawls to a halt and fails. I have
• Video

  8 answers, most recent on 5/12/2008

  RE: 60p into 24p for slow motion
  You'd think so however I'm simply repeating the method recommended in a very old white paper from SCS on how to go between 24fps and 25fps. The advantage would seem to be that there's no risk of rounding errors causing resampling. For example 30p is
• Video

  18 answers, most recent on 5/7/2008

  RE: OT: First 4K Production-to-Post Feature Film
  Bob, you're right about higher temporal resolution being another brush that would be good to have. 24 fps is a legitimate brush for creating a sense of dreaminess though. The thing about say 60 fps 4K is the staggering amount of data this would
• Video

  29 answers, most recent on 4/14/2008

  RE: Can Vegas handle .m2t files?
  Definitly Vegas does not succeed to import in the media pool, the .m2t files Here is a copy of the details of the error message that it produces (can it be a problem with the MPEG plugins?) HERE IS THE ERROR MESSAGE: Sony Vegas Pro 8.0 Version
• Video

  8 answers, most recent on 4/10/2008

  RE: Can Avid speak Vegas?
  Hey, noticed that nobody replied. :( One way to do this would be to export a EDL from Vegas- under *scripting*, not file->save as. Re-capture from your tapes. In Vegas, export a quicktime reference... e.g. quicktime DV version. Dump that
• Video

  21 answers, most recent on 4/7/2008

  RE: HDV to tape: too many problems for native editing
  Well I just had some native m2t off tape success! After weeks of my new Z7 not being recognized by my core2duo laptop, I tried capturing the footage with my older HVR-A1 on the new computer. The HVR-A1 was recognized, but it wouldn't work with the
• Video

  26 answers, most recent on 3/25/2008

  Burning a Blue ray disc with vegas - ERROR MESSAGE
  hello, Faith Granger here, brand new to the Forum. the VASST people suggested I post here to get help. So here I am. Thank you in advance for your assistance. I need to burn a High Def DVD in Vegas and was told to go under "tool" - "burn disc"
• Video

  15 answers, most recent on 3/19/2008

  RE: Please school me on Proxies
  A proxy is just a copy of the full res media, anything that's easier to edit. Once you finish the edit you can then swap the full res files for the proxies and render. Or say it was 35mm film. You get DV proxies, edit them, send the EDL off to a
• Vegas Movie Studio (up to ver. 17)

  2 answers, most recent on 3/14/2008

  Film Look in Vegas?
  I read an article by Douglas Spotted Eagle (a Vegas instructor) about creating a film look cadence in Vegas. His suggestion was to re-render your 29.97 video using the "NTSC DV 24p (inserting 2-3 pulldown)" setting. He adds to make sure that the
• Video

  8 answers, most recent on 6/29/2008

  RE: New Panasonic SD9 AVCHD files
  Well, I got my hands on an SD9 1920x1080/24p clip. Causes an exception error in VP8b just like the original Panasonic AVCHD files from the SD1 did with Vegas 7. However, it opens and plays fine in Nero 8. I haven't had a chance to play with it