• Video

  14 answers, most recent on 5/31/2025

  RE: VEGAS PRO 22 HAVE THE WORST AV1 DECODING: CHROMA SUBSAMPLING 4:1:0
  @vagnerdesouza I don't want to be rude but the GTX 1050 isn't capable of decoding AV1 so there is something wrong with your decoding test: https://developer.nvidia.com/video-encode-and-decode-gpu-support-matrix-new I am not recommending a new GPU.
• Video

  9 answers, most recent on 9/13/2024

  RE: Av1 GPU Encoding
  @Resoula The answer is probably no. I observed no Nvenc/Intel/AMD/ HW encoding activity in TM. For a 27s UHD test clip that takes 26.53 seconds in VP to render it takes 7.39 seconds using ffmpeg with Nvenc HW encoding. That's a 3.6 x speed increase
• Video

  10 answers, most recent on 12/8/2024

  RE: VP22 support Nvidia NVENC with AV1 ?
  I while back I compared nvidia hardware renders on my 4090 via Voukoder with the vp22 default Magix av1 renders which are slower and cpu only. I still have the clips laying around. The reference clip I used was the one in this thread in which
• Video

  7 answers, most recent on 12/21/2024

  RE: AV1 render fails w/ "The reason for the error could not be determined"
  Interesting, haven't seen that. Are you working in 32-bit mode (I notice you have 10-bit footage so assume yes but which mode? ACES?)Not a solution but for AV1 I'd only render through Voukoder as it can tap into hardware renderers that are pretty
• Video

  50 answers, most recent on 11/30/2024

  RE: VRAM Bottleneck in Vegas Pro 22 – Considering GPU Upgrade to RX 7900 X
  Glad to assist if my hardware fits your requirements. See my signature. Using ffmpeg ... I have tested AV1 some time ago across all 3 devices, Intel, AMD and Nvidia with respect to quality. Not speed because my Intel A770 gpu resides in a 4x slot
• Video

  12 answers, most recent on 10/16/2024

  RE: Best Render Settings for Sony ZV-E10 In Vegas Pro 22? (1080P 30)
    With Youtube, as well as with most streaming services, the limiting factor is their delivery bitrate ceiling, and not the bitrate of the source you sent to them. I get that. I have no expectation that the bitrate will be anything but the YouTube
• Audio

  13 answers, most recent on 12/6/2024

  RE: popping sound at beginning of rendered video
  From Vegas Pro 22's specifications page, M2TS isn't listed as a supported video format: Import VideoApple ProRes, Blackmagic RAW, HEVC/H.265, AVC/H.264, AV1, MP4, MPEG-2, MPEG-1, AVI, WMV, M4V, Sony XAVC / XAVC-S / XDCAM EX / HD 422 / MXF / ProDisc
• Video

  20 answers, most recent on 10/28/2024

  RE: DebugMode FrameServer 6.0 Available for V22
  @wwaag Here are the 2 command lines I used for the ffv1 renders... just the input and output names change for ffmpeg direct and dmfs renders. I move the # comment from one to the other to execute them from the same fs.ps1 powershell script
• Video

  50 answers, most recent on 11/30/2024

  RE: VRAM Bottleneck in Vegas Pro 22 – Considering GPU Upgrade to RX 7900 X
  Update to my previous posts RE: fixed resolutions and limitations to allow split frame encoding. Extract from following url ..."With split encoding, an input frame is split and each part is processed in parallel by multiple NVENCs on the chip, which
• Video

  9 answers, most recent on 9/13/2024

  RE: Av1 GPU Encoding
  I'm not sure I know what I'm doing but on my i9-13980HX / NVIDIA GeForce RTX 4090 Laptop GPU, I changed the Voukoder default template to "AV1 (NVIDIA NVENC)" and the render seemed to work just fine.  ...Jerry  
• Audio

  5 answers, most recent on 12/17/2024

  [Solved] One A/V track AC3, not synced to video - Other cam is in mono
  Two problems: first track the audio (AC3) isn't synced the video. Second track is an imported AV that the (Panasonic) cam down mixes 5.1 to stereo. When putting it on the track it puts out all 6 audio tracks with one of the tracks is the stereo
• Video

  6 answers, most recent on 10/3/2024

  RE: GPU makers AMD and NVIDIA are finally solving their audio issues
  @Cielspacing which AMD GPU do you have? I looked at your User Profile, and it's blank. Suggestion, add your computer specs to your Signature as I've did below. If there are issues, the first place I look is to see what hardware is being used. I
• Video

  6 answers, most recent on 1/22/2025

  RE: Vegas suddenly down want to import any movie files I download
  The files may be encoded as VP9 which is good for streaming but barely supported for editing. If it's AV1 it should open in VEGAS 22 (but may not be great for editing either).Check with MediaInfo.
• Video

  28 answers, most recent on 6/7/2025

  RE: My Journey To AV1
  So I managed to get FFMetrics to work and obtained the following Vmaf values for a complex detailed clip at the following VBR bit rates with :Original Clip 101Mb/s size 301MbH264 98/196 Vmaf 95.4109 size 126Mb reduction 42%AV1:90/180 Vmaf 100.0000
• Video

  6 answers, most recent on 10/3/2024

  RE: [Solved] GPU makers AMD and NVIDIA are finally solving their audio issues
  Today AMD GPU's new Adrenalin version driver 24.9.1 was finally released For quite some months already, their driver updates' accompanying release notes have included this problem as part of their known issues.It has been described as: "Audio and
• Video

  20 answers, most recent on 8/14/2024

  RE: Vegas using a single core for rendering?
  If I use hardware encoding and then put mask and feather on the first section of project I get something similar to your CPU core use because Vegas feather is so bad (isn't it time for that to get upgraded?) It looks more like a plugin processing
• Video

  43 answers, most recent on 2/7/2025

  RE: Bit Rate as a Function of Complexity: Constant Rate Factor Encoding
  I'm not sure that variable-cap bit-rate optimization, which was developed for Avc HD lossy camera footage, does much but lower performance and quality for 4k and above. 4k 10-bit avc is so large, slower editing, and lower in quality, I only shoot or
• Video

  14 answers, most recent on 5/31/2025

  RE: VEGAS PRO 22 HAVE THE WORST AV1 DECODING: CHROMA SUBSAMPLING 4:1:0
  I am starting to wonder if these quantitative tests are fit for purpose if they can't discern large visual artifacts resulting from encoding and decoding. From the AV1 render blocks to this AV1 chroma smear these are visible image flaws that are a
• Video

  10 answers, most recent on 10/31/2024

  RE: VEGAS Pro 22 Import issues, 60FPS recorded video but 59.94 Project
  Above shows the settings reported by Vegas Pro 22 Here windows media player reports 60FPS Video were recorded using Quicksync AV1, 1440p@60FPS, Bitrate is 12000kbps using CBR, OBS stats reports no frames missed or skipped frames and windows media
• Video

  20 answers, most recent on 8/14/2024

  RE: Vegas using a single core for rendering?
  @Zaither-P Ok. I downloaded your project & I do see a single core being mainly used, how I rendered it anyway. I haven't broken it down or loooked into it deeper. This is the project I downloaded from your web page, it wouldn't let me download
• Video

  20 answers, most recent on 8/14/2024

  RE: Vegas using a single core for rendering?
  I just finished a short video for a church. Sorry, I have to disagree about using a single core for rendering, even if it is to AV1. The video mostly consists of DJI Mini 3 Pro 4K Cinelike-D footage with Bit rate set to 100Mb/s. First, I personally
• Video

  42 answers, most recent on 5/23/2025

  RE: No Audio and no rendering possible with m2ts files in Win11 24H2
  If u have a suitable DV Camcorder that supports usb output (using UVC protocol) then a firewire card is not required to capture/copy DV from tape. The HDV-camcorder I had, the legendary Sony HC1 (2006), used the USB output to transfer pictures taken
• Video

  7 answers, most recent on 12/21/2024

  AV1 render fails w/ "The reason for the error could not be determined"
  Rendering footage created with a Panasonic Lumix GH5M2 I get this error in about half the attempted renders. Some videos render just fine, others error out after a few seconds with that unspecified error. This is reproducible on TWO different PCs,
• Video

  20 answers, most recent on 8/14/2024

  RE: Vegas using a single core for rendering?
  I just finished a short video for a church. Sorry, I have to disagree about using a single core for rendering, even if it is to AV1. The video mostly consists of DJI Mini 3 Pro 4K Cinelike-D footage with Bit rate set to 100Mb/s. First, I personally