• Video

  348 answers, most recent on 8/1/2024

  RE: Benchmarking results continued
  I set Dynamic RAM Preview to ZERO (per https://www.vegascreativesoftware.info/us/forum/low-memory-error-could-not-finish-rendering--115934) under the Vegas "Preferences, Video tab) and that stop the low memory errors. The original value of the
• Video

  21 answers, most recent on 1/26/2020

  RE: RGB Safe Broadcasting
  Use the histogram. Your material is already broadcast safe (other than copyright). You could beef up the blacks a little. I think I gave you this link
• Video

  10 answers, most recent on 12/1/2019

  RE: Error code: -59 An error occurred starting Vegas Pro.
  I have Vegas Pro 15 stand alone. No bundle. Thanks. I only wanted to point out that the error -59 is often associated with software purchased from third-party vendors.
• Video

  10 answers, most recent on 12/1/2019

  RE: Error code: -59 An error occurred starting Vegas Pro.
  Do you have a Steam or Humble Bundle version? https://www.vegascreativesoftware.info/us/forum-search/?query=Error%20-59
• Video

  10 answers, most recent on 12/1/2019

  Error code: -59 An error occurred starting Vegas Pro.
  Error code: -59 An error occurred starting Vegas Pro. There is no license to use this software. I found another post that explained how to fix this error. I uninstalled Vegas Pro and removed the file, installation.ini. It worked until I closed Vegas
• Video

  20 answers, most recent on 11/7/2019

  RE: Vegas Pro 17 crashes as soon as I press "Render as"
  Thank you , also please a screenshot of your rndertemplate that you have choosen after "Render to..."Please also your Error report with selected "show problem details" and even better that whole report copied an past here in a message. Extra
• Video

  42 answers, most recent on 12/4/2019

  RE: VEGAS 17 (Version 321) keeps freezing and crashing
  Here we go again. You pop up every few months with the same complaint, and then refuse to substantiate it. Post a file that YOU KNOW causes a crash. If you actually can... maybe you aren't as confident as you claim? It's common in huge percentage
• Video

  42 answers, most recent on 12/4/2019

  RE: VEGAS 17 (Version 321) keeps freezing and crashing
  Here we go again. You pop up every few months with the same complaint, and then refuse to substantiate it. Post a file that YOU KNOW causes a crash. If you actually can... maybe you aren't as confident as you claim? It's common in huge percentage of
• Video

  10 answers, most recent on 8/21/2019

  RE: Render time for video of 25 min in 1080 60fps is 27 min, is this ok?
  go into file>project properties and make sure that the project is set to 1080p (1920x1080 pixels) and 59.94fps. Also make sure it is not set to interlace, if you see upper or lower field first, set that to off. For playback, go into the
• Video

  10 answers, most recent on 8/21/2019

  RE: Render time for video of 25 min in 1080 60fps is 27 min, is this ok?
  go into file>project properties and make sure that the project is set to 1080p (1920x1080 pixels) and 59.94fps. Also make sure it is not set to interlace, if you see upper or lower field first, set that to off. For playback, go into the
• Video

  31 answers, most recent on 11/27/2019

  RE: KillVegas -- 2 simple apps for killing Vegas processes
  ...Until the problem is fixed in Vegas or for use with older versions, here's a simple app that may be of value. https://www.dropbox.com/s/elyaf9s2b3sut59/KillVegas.exe?dl=0...Let me know if there are problems. Hi wwaag, I get an "Unhandled
• Video

  6 answers, most recent on 8/13/2019

  RE: v17 install fails on windows 10 with danish locale
  Boris uninstalled, V17 uninstalled, only V17 reinstall, no error message from Boris, so now that issue is, if not solved, at least parked for now. But render anything, nah ….Trying to standard documents folder instead of my render-folder:Trying
• Video

  1175 answers, most recent on 4/29/2025

  RE: Happy Otter Scripts for Vegas Pro
  It is a four hour project, #1 always fails, #2 gives the error shown. Nothing else remarkable; source is .mts, 25Mbps MPEG-2, AC3 audio, sanitized in VideoRedo. All Audio but track #1 is muted, and it is a stereo project. GeneralID                
• Video

  6 answers, most recent on 2/6/2020

  "ERROR CODE -59" !!!!! OMG
  I'm asking you to help me quickly. I have to make a film in about 5 hours.  There was an error "ERROR CODE -59". I have the original software! What can I do? I am so disappointed with this bad program.   I don't want to erase everything because I
• Video

  222 answers, most recent on 1/18/2020

  RE: [Closed] Benchmarking
  Here is mine FHD entry. Frame rate bouncing mostly 21-25. I also try to run the 4K project but unable to open the veggie. See attach pic below, keep giving me error in opening the file.
• Vegas Movie Studio (up to ver. 17)

  One answer, on 6/15/2019

  Error 59 with Movie Studio 15
  Hey guys, I need some help (I think the site forced me to make a new profile too...so if I'm here by another name, I apologize.) I purchased Movie Studio 15 (which I think is technically Vegas Pro 15?) from the Humble Bundle. Recently i've been
• Vegas Movie Studio (up to ver. 17)

  5 answers, most recent on 6/6/2019

  RE: Error 2
  There's also this document on the German language section of the forum: https://www.vegascreativesoftware.info/de/support/artikel/fehler-datei-fehlt-missing-executable-error-error-2-59-steam--24/ And you could always at least try resetting if the
• Video

  13 answers, most recent on 5/30/2019

  RE: Playing MP4s on TV from FAT32 USB Hard Drive
  Files are mp4 so OK there.  1280x720p or 1920x1080i    NTSC(59.97fps) or maybe PAL(50fps)  if in PAL-land. Some TV's will take 1920x1080p most will report an error.
• Video

  42 answers, most recent on 11/20/2019

  RE: Bug with new build - auto ripple is crossfading unintentionally
  I am also seeing the issue, but only with media with a non-integer frame rate such as 23.976, 29.97 and 59.94. Not with 25 or 50 fps. I suspect a rounding error was introduced when the new variable frame rate support was added in build
• Video

  42 answers, most recent on 11/20/2019

  RE: Bug with new build - auto ripple is crossfading unintentionally
  I am also seeing the issue, but only with media with a non-integer frame rate such as 23.976, 29.97 and 59.94. Not with 25 or 50 fps. I suspect a rounding error was introduced when the new variable frame rate support was added in build 424. I have
• Video

  45 answers, most recent on 5/27/2019

  RE: output AVI file problem
  I rendered your part1 with mostly my own Gopro files and pictures but used your sourcefile on its particular place in your project part1. I could not find anything wrong with the project nor with that sourcefile.So what caused your error with the
• Video

  45 answers, most recent on 5/27/2019

  RE: output AVI file problem
  I rendered your part1 with mostly my own Gopro files and pictures but used your sourcefile on its particular place in your project part1. I could not find anything wrong with the project nor with that sourcefile.So what caused your error with the
• Scripting

  9 answers, most recent on 4/6/2019

  RE: Camera Shake Script
  I have this error :   C:\Program Files\VEGAS\Vegas Pro 16\Script Menu\Shake Selected Clip.cs(28) : The type or namespace name 'Sony' could not be found (are you missing a using directive or an assembly reference?)C:\Program Files\VEGAS\Vegas Pro
• Video

  1175 answers, most recent on 4/29/2025

  RE: Happy Otter Scripts for Vegas Pro
  Oh no! I copied this out of the RenderAbort.log file: 2019/03/31  11:42:13 -- 2019/03/31  11:42:13 --RenderPlus-Vegas ProcessID 4916 Encoder ffmpeg 2019/03/31  11:42:13 --CommandLine: avs2pipemod -y4mp "C:\ProgramData\HappyOtterScripts\Sony Vegas