• Video

  255 answers, most recent on 12/9/2023

  RE: Crash after about 3 minutes of editing "nvopencl64.dll" error
  Hangs and crashes after about 3 minutes of editing, done all the check lists updated and back dates drivers, everything and still this same error I sent off to tech support. No one responds and tech support does not exist. is this a working
• Video

  255 answers, most recent on 12/9/2023

  Crash after about 3 minutes of editing "nvopencl64.dll" error
  Hangs and crashes after about 3 minutes of editing, done all the check lists updated and back dates drivers, everything and still this same error I sent off to tech support. No one responds and tech support does not exist. is this a working software
• Scripting

  83 answers, most recent on 1/13/2020

  RE: Vegas Pro 14 to Handbrake: no FrameServer 3.0 in "render as" window
  Thanks for the install log. It looks fine. No errors were reported during installation. I guess it's time to start grasping at straws since nothing is obvious. Try this. 1. First uninstall install HOS completely and then re-install. Then open
• Scripting

  9 answers, most recent on 7/18/2019

  RE: Media length incorrect using So4 Compound Reader
  I've reproduced the error with a GoPro 3 file so I've edited the post to remove the GoPro 7 references. This is all the same file. Before inserting it, the length is 17 seconds but after inserting it, the length is 14 seconds. It should be 14
• Video

  4 answers, most recent on 7/11/2019

  Cursor on my timeline will not respond
  All of a sudden when I went to use my VP16 (build 424) the cursor will not respond to any keyboard or (shuttle pro 2) inputs for play/stop/pause etc etc., nor when I click on the play buttons too, then after a short while Vegas crashes with the
• Video

  11 answers, most recent on 6/29/2019

  Is Sony Vegas 14 not compatible with datamoshed or tampered files?
  I used Avidemux to datamosh a video and now trying to put it back into sony vegas to correct the audio it's giving me two seperate error whether I put the video as a .avi or .mp4. For .avi it's saying;An error occured while opening a codec. and
• Video

  3 answers, most recent on 6/28/2019

  Vegas and Registration
  So I have quite a peculiar issue. Background: I purchased Vegas Pro 14 via a charity event through Humble Bundle. I have used it on my old laptop for about 2 years. Now in 2019 I have built a new PC and would like to install it. Now I want to
• Vegas Movie Studio (up to ver. 17)

  11 answers, most recent on 6/26/2019

  Launch in Different Version of Movie Studio? Association?
  I now have MS 14 and MS 16. I know 'some' about project files created in 16 not being able to open in 14, but I have a related problem that I could not find in the forum. I created a project in 16. After closing it and if I double click on the
• Video

  23 answers, most recent on 6/25/2019

  RE: Vegas 13 won't load keeps redirecting me to purchase VP16
  I just thought of something else, that you should definitely check.All VEGAS Licenses can be activated on up to 2x different computers.If MAGIX/Vegas thinks you are trying to activate for a 3rd time, that may produce the error. Login to your MAGIX
• Video

  58 answers, most recent on 7/6/2019

  RE: Stuck in 4K60 rendering hell? Here are some tips
  I appreciate everyone's open minded comments. :) @fr0sty Great suggestion (Otter Scripts) but I tried this a few months back and it looked promising, but same issue sadly enough. I think it's the compositing engine that crashes and Vegas never
• DVD Architect

  13 answers, most recent on 6/22/2019

  RE: DVD Architect Pro 5.2 Crashes while opening jobs
  @john-baker Dang. I was excited because your idea made a lot of sense. I did a uninstall of both programs - the older 5.2 and the newer 7. 5.2 didn't uninstall much at all. The exe file and several others were still in the C:\program folder so I
• Video

  157 answers, most recent on 8/13/2019

  RE: Vegas 17 Feature Requests
  Requirements list 1. Revolutionary new INFUSION Engine like in Magix Video Pro X. GPU decoded video frames (DirectX textures) are now directly transferred to the video engine, so copying them to memory is unnecessary. Even during resource-hungry
• Video

  146 answers, most recent on 8/22/2019

  RE: Help Grazie spend his dosh!
  Here's a version of the Red Car with the video media trans-coded to a number of 4k formats. Haven't actually run any render timings with it myself yet but it seems to load and play smoothly and error free in Vegas versions I have handy... 13 and
• Video

  146 answers, most recent on 8/22/2019

  RE: Help Grazie spend his dosh!
  Here's a version of the Red Car with the video media trans-coded to a number of 4k formats. Haven't actually run any render timings with it myself yet but it seems to load and play smoothly and error free in Vegas versions I have handy... 13 and
• Vegas Movie Studio (up to ver. 17)

  One answer, on 6/15/2019

  Error 59 with Movie Studio 15
  Hey guys, I need some help (I think the site forced me to make a new profile too...so if I'm here by another name, I apologize.) I purchased Movie Studio 15 (which I think is technically Vegas Pro 15?) from the Humble Bundle. Recently i've been
• Video

  146 answers, most recent on 8/22/2019

  RE: Help Grazie spend his dosh!
  Sorry I didn't come across this thread till now because I finished a new build myself a couple weeks ago and wrestled with allot of the same issues as Grazzie... well when you build it yourself it's not ever really finished. I kind of documented the
• Video

  One answer, on 6/11/2019

  Distorted Preview on Vegas Pro 14
  Version: 14.0 (Build 270)   So about a month ago I got a new monitor. i've been using Vegas for probably a year and a half now and never had any issues with it that I didn't cause myself. But this one I can't explain. I've tried uninstalling
• Vegas Movie Studio (up to ver. 17)

  6 answers, most recent on 6/11/2019

  RE: Vegas movie Studio 64BIt version
  It is the 64-bit version all the same as are all Magix Vegas Pros and Movie Studios starting from versions 14. There may be errors in Support articles such as this one in this forum's German language Support NEW section: "Movie Studio und Movie
• Video

  No answers, created on 6/6/2019

  "Archiving failed. See log for details"
  So im trying to export my .veg project to a .prproj to use on a different computer (using premiere pro) on vegas pro 14 but this error message keeps popping up: "Archiving failed. See log for details". I know next to nothing about coding or any of
• Video

  9 answers, most recent on 6/2/2019

  RE: Radeon VII with Vegas 16... wow!
  @Howard-Vigorita If the error is a random point somewhere after an hour of rendering, your 9900K or GPU may be overheating an hour into a render... You may want to watch your temps & lower clocks... Mine will do the Red Car test in 13s-14s @ 5.0
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 5/29/2019

  Not possible to render Videos in Movie Studio 15
  Hello everyone, recently I purchased the Creative Freedom Bundle from Humble Bundle.com, which was including different creativity tools such as Vegas Movie Studio 15. Furthermore the program is working pretty fine, nothing crashed so far and I can
• Video

  One answer, on 5/23/2019

  Error Code -14 When Trying to Use Vegas 15
  I bought the Vegas editing bundle from Humble Bundle today, and while I was trying to redeem the Vegas Pro 15 software, the registration crashed and closed out. I opened it back up and it says the code has been used. I uninstall the program and
• Video

  21 answers, most recent on 5/16/2019

  RE: I Purchased Vegas. Stop making me re-authorize it EVERY. TIME.
  If your work computers are normally connected only to a private network (like mine) you'll have to breach security once a month or Vegas will de-authorize. Never happened with v14 (Magix promissed it wouldn't do that) but v16 definitely does this.
• Video

  30 answers, most recent on 5/12/2019

  RE: The lowest static image video size possible
  Wow! Thank you so much guys.I tried the 1fps tweak but It couldn't render (error window kept popping out). When I somehow got it to render on 1fps, the video was 1second long, and on 2fps, the video was 2 seconds long (hmm, interesting...). So far