Search the VEGAS Community for tutorials, questions and solutions as well as for forum members

Hello, Maybe you can read this : https://www.vegascreativesoftware.info/us/forum/error-with-auto-ripple-vegas-12-13-14--104547/#write-comment especially the comment of Nike Hope

Vegas Movie Studio (up to ver. 17)

5 answers, most recent on 10/13/2019

Won't use downloaded music

Hey everyone So I got a new computer and I'm honestly not sure if this is a computer error or a program error, I believe program( Movie Studio 14.0 Platinum) though.When creating videos for Youtube I down load music from them all the time. I did

Video

57 answers, most recent on 10/5/2019

RE: Bitrate for perfect uncompromising, yet not absurdly high quality work

@Marty111 Some intermediates and a lossless compressed example, MagicYUV, it can be purchased for $14. Install it and it’ll appear in VP, same as any other render template. The reason MagicYUV doesn’t appear at the top is possibly margin of error

Video

One answer, on 9/20/2019

Please look at this error for an XML export from Vegas Pro 16 on PC

Any project that is any real complexity always fails to export an xml. The failure error logs aren't really helpful either. Here is a log example of a project I would REALLY like to export. Go to the very bottom of the log where it says "unexpected

Video

10 answers, most recent on 9/18/2019

RE: Vegas 12 Horizontal Lines

I used 4k Video Downloader to acquire your clips. I am unable to duplicate your error in Vegas 14, even when deliberately mis-rendered to 29.97i. Your video is true 480 30.000p, btw, not NTSC. I would use the Magix (Mainconcept) 480p Internet

Video

17 answers, most recent on 9/19/2019

RE: What do I need to do to make Vegas 17 stable?

@AlesCZ Just wait for the first update. It’s very unstable at the moment unless you’re doing a very simple project. If you have a previous version use it instead. You can transfer your VP17 project using copy and paste from VP17 to say VP1n

Video

17 answers, most recent on 9/19/2019

RE: What do I need to do to make Vegas 17 stable?

@AlesCZ Just wait for the first update. It’s very unstable at the moment unless you’re doing a very simple project. If you have a previous version use it instead. You can transfer your VP17 project using copy and paste from VP17 to say VP1n earlier

Vegas Movie Studio (up to ver. 17)

6 answers, most recent on 9/14/2019

RE: Vegas Movie Studio 15 (and 16 Trial) no longer launch (Advice?)

Try troubleshooting with this post https://www.vegascreativesoftware.info/us/forum/faq-vegas-pro-won-t-start-what-can-i-do--104784/. Try item 18 first. Be sure to closely follow the resetting instructions. (Most items should apply for MSP as

Video

10 answers, most recent on 8/21/2019

RE: Render time for video of 25 min in 1080 60fps is 27 min, is this ok?

go into file>project properties and make sure that the project is set to 1080p (1920x1080 pixels) and 59.94fps. Also make sure it is not set to interlace, if you see upper or lower field first, set that to off. For playback, go into the

Video

4 answers, most recent on 8/20/2019

RE: V17 Error reading .avc-files larger than 4 gigabyte

Then the file had not been rendered 14 gigabytes large by V17 - also btw. I edit the post because about half an hour into a file a couple of hours long is two gigabytes not four. And yes, all drives in this computer are formatted NFTS and it is a 2

Video

43 answers, most recent on 1/29/2021

RE: How do I stitch "chaptered" MP4 video files together seamlessly?

My old version of Vegas 14 does not like it when I drag and drop my raw gopro files into it. My pointer turns onto a forbidden icon then when I drop it comes up with an error. This is why I thought I had to convert them first before I'm able to use

Vegas Movie Studio (up to ver. 17)

11 answers, most recent on 8/16/2019

RE: Anyone editing Virb 360 video in MS 14 - can't open mp4 files ?

Has anyone solved the problem? I'm running Movie Sutdio 16.0 Platinum and get the same error when trying to import Garmin Virb 360 video. I see this post was originally using v14 and if there was actually a fix provided, you would think it would

Video

255 answers, most recent on 12/9/2023

RE: Crash after about 3 minutes of editing "nvopencl64.dll" error

Continue to Crash as on last post in this forum. I edit for about 5 to 20 minutes and it hangs and give ,me the above error message, it does it all the time, got 17 with high expectations and so far I feel a little let down, I submitted this to tech

Video

1197 answers, most recent on 12/31/2025

RE: Happy Otter Scripts for Vegas Pro

It is a four hour project, #1 always fails, #2 gives the error shown. Nothing else remarkable; source is .mts, 25Mbps MPEG-2, AC3 audio, sanitized in VideoRedo. All Audio but track #1 is muted, and it is a stereo project. GeneralID

Video

255 answers, most recent on 12/9/2023

RE: Crash after about 3 minutes of editing "nvopencl64.dll" error

Hangs and crashes after about 3 minutes of editing, done all the check lists updated and back dates drivers, everything and still this same error I sent off to tech support. No one responds and tech support does not exist. is this a working

Video

255 answers, most recent on 12/9/2023

Crash after about 3 minutes of editing "nvopencl64.dll" error

Hangs and crashes after about 3 minutes of editing, done all the check lists updated and back dates drivers, everything and still this same error I sent off to tech support. No one responds and tech support does not exist. is this a working software

Scripting

83 answers, most recent on 1/13/2020

RE: Vegas Pro 14 to Handbrake: no FrameServer 3.0 in "render as" window

Thanks for the install log. It looks fine. No errors were reported during installation. I guess it's time to start grasping at straws since nothing is obvious. Try this. 1. First uninstall install HOS completely and then re-install. Then open

Scripting

9 answers, most recent on 7/18/2019

RE: Media length incorrect using So4 Compound Reader

I've reproduced the error with a GoPro 3 file so I've edited the post to remove the GoPro 7 references. This is all the same file. Before inserting it, the length is 17 seconds but after inserting it, the length is 14 seconds. It should be 14

Video

4 answers, most recent on 7/11/2019

Cursor on my timeline will not respond

All of a sudden when I went to use my VP16 (build 424) the cursor will not respond to any keyboard or (shuttle pro 2) inputs for play/stop/pause etc etc., nor when I click on the play buttons too, then after a short while Vegas crashes with the

Video

11 answers, most recent on 6/29/2019

Is Sony Vegas 14 not compatible with datamoshed or tampered files?

I used Avidemux to datamosh a video and now trying to put it back into sony vegas to correct the audio it's giving me two seperate error whether I put the video as a .avi or .mp4. For .avi it's saying;An error occured while opening a codec. and

Video

3 answers, most recent on 6/28/2019

Vegas and Registration

So I have quite a peculiar issue. Background: I purchased Vegas Pro 14 via a charity event through Humble Bundle. I have used it on my old laptop for about 2 years. Now in 2019 I have built a new PC and would like to install it. Now I want to

Vegas Movie Studio (up to ver. 17)

11 answers, most recent on 6/26/2019

Launch in Different Version of Movie Studio? Association?

I now have MS 14 and MS 16. I know 'some' about project files created in 16 not being able to open in 14, but I have a related problem that I could not find in the forum. I created a project in 16. After closing it and if I double click on the

Video

23 answers, most recent on 6/25/2019

RE: Vegas 13 won't load keeps redirecting me to purchase VP16

I just thought of something else, that you should definitely check.All VEGAS Licenses can be activated on up to 2x different computers.If MAGIX/Vegas thinks you are trying to activate for a 3rd time, that may produce the error. Login to your MAGIX

Video

58 answers, most recent on 7/6/2019

RE: Stuck in 4K60 rendering hell? Here are some tips

I appreciate everyone's open minded comments. :) @fr0sty Great suggestion (Otter Scripts) but I tried this a few months back and it looked promising, but same issue sadly enough. I think it's the compositing engine that crashes and Vegas never