• Video

  6 answers, most recent on 9/10/2015

  Using the CPU fully
  I just installed my TMPGENC Mastering Works 6 upgrade. I frameserve from VPro 13 to TMW to create 35 Mbps MPEG2 BR files. With TMW5, my 5960X averaged 23% usage. Astonishingly, TMW6 is averaging 90%+ - CPU is cooking along at 4GHz, 52 degrees C.
• Video

  3 answers, most recent on 9/3/2015

  RE: "Vegas has stopped working" error & AMD Radeon
  HP specs says it has an HD4000 onboard and the HD8600. Did you update your Video drivers from AMD, and Intel if both GPUs are seen in Device Manger? How about the rest of the hardware drivers, like sound, chipset INFs, NICs, and BOIS up to the
• Video

  26 answers, most recent on 9/4/2015

  RE: XAVC MXF files - playback problems
  "Correction, it was 111 fps with the video composition test...." So in my experience Luxmark represents a closer match to Vegas OpenCL. What scores do you see compared to the lists on
• Video

  4 answers, most recent on 8/27/2015

  RE: Vegas 12 makes windows 7 freeze??
  No you can not assume Disk0 is your boot disk. Disk order has to do with where the drives were plugged in to the controller, and install selections. On my system SSD boot is disk1, and spinning storage that used to be a boot disk is disk0. I
• Vegas Movie Studio (up to ver. 17)

  12 answers, most recent on 8/25/2015

  RE: No GPU available
  Actually this one is 512 shaders + GDDR5 memory :) http://www.hardwareluxx.com/index.php/reviews/hardware/vgacards/29726-test-sapphire-radeon-r7-250-ultimate-.html But yes, it's not the most modern GPU or CPU. I can't really justify more expensive
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 10/1/2015

  RE: Unable to Import Media
  I have just upgraded my hardware Did you have to reinstall MS? If not, you may need to.
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 10/1/2015

  Unable to Import Media
  I looked through the topics but couldn't find an answer. Sorry guys I have just upgraded my hardware and now Vegas Movie Studio won't import my media I am trying to import media to Movie studio and it comes up with an error "The File Format
• Video

  11 answers, most recent on 8/16/2015

  RE: Vegas via Bootcamp... any users here?
  Thanks Johnny, The iMac 5K comes with an R9 290 I believe. So I should be sure to get AMD's drivers for Mac and not Apples? My PC at the moment is spec'ed quite a bit higher than the iMacs, so this is something I am looking at considering for the
• Video

  23 answers, most recent on 7/31/2015

  RE: Window 10 Auto Upgrade W/O Reservation
  @FPP Except for a few frills, the changes are mostly in the way it looks. Right now I am giving my first impressions. After I use it a while, then I might start liking it. This is on my internet system. While installing it, there was one part
• Video

  11 answers, most recent on 7/8/2015

  RE: win 10?
  "Surely the best solution is to make sure you have a good image of your current system. Then update to 10 and grab the serial number allocated. It may not be that simple. Software doesn't work from just a serial number anymore. It is also tied to a
• Video

  11 answers, most recent on 7/8/2015

  win 10?
  ok, opening a can of worms... with the advent of 10 around the corner, and all my pc's eligible for upgrade, i was wondering if anyone out there has actually been using the beta releases with vegas 12 / 13? i am not likely to be the first kid on
• Video

  33 answers, most recent on 6/9/2015

  RE: OT "Get Windows 10"
  "I have read where Windows 10 will be the last official version. That means no more version upgrades; just constant updates. That sounds a lot like an evolutionary step to a subscription model." You know, that's actually something i could get on
• Video

  33 answers, most recent on 6/9/2015

  RE: OT "Get Windows 10"
  > "I have read where Windows 10 will be the last official version. That means no more version upgrades; just constant updates. That sounds a lot like an evolutionary step to a subscription model." I believe this is the statement that caused all
• Video

  33 answers, most recent on 6/9/2015

  RE: OT "Get Windows 10"
  Can you do a full reinstall of the free Windows 10 upgrade on the same hardware without issues? (To clear the inevitable cobwebs that appear.)
• Video

  88 answers, most recent on 5/22/2015

  RE: Catalyst Edit
  @SCS I might just be old and jaded, but I think the idea of supporting the feature film people is a marketing mistake at this point in time. This would have been a hip move back in the 90ies, but now the NLE is becoming as ubiquitous as the word
• Scripting

  No answers, created on 5/12/2015

  Multicam Script
  Moving a question here I should have asked here in the first place...didn't notice the scripting forum until just now. Is there a script for multicam that will automatically insert cuts and select takes in a specified sequence? Suppose I have
• Video

  10 answers, most recent on 2/25/2018

  Multicam Script
  Is there a script for multicam that will automatically insert cuts and select takes in a specified sequence? Suppose I have three sources: wide and close from the same angle, and the third source is from a side angle. So, in my example, I would
• Video

  14 answers, most recent on 5/15/2015

  RE: Fluent preview playback
  I guess the CPU is a bottleneck in this, unless a better graphics card can help with the previewing? A better graphic card will help but the CPU will be a bottleneck very fast. If you don't want a full hardware upgrade, proxies is the only way to
• Video

  14 answers, most recent on 4/23/2015

  RE: sot. dumb windoz question...
  Posted by: Hulk, Date: 4/23/2015 1:58:50 AM But MS needs something to sell and my model doesn't really give people a reason to upgrade. A lot of that is MS urging the developers to drop support for old OS's with new versions of their software. To a
• Video

  66 answers, most recent on 10/9/2015

  RE: No support for GTX 970 / Maxwell GPU?
  I agree with @Oldsmoke, but I think SCS has already done this. I can respect choosing to base your code on something that appears to support multiple manufacturers, however, in the end it’s more about getting stuff done. If SCS was active in
• Video

  36 answers, most recent on 3/31/2015

  GPU upgrade...and disappointing initial results
  The saga continues of upgrading from On-MoBo Intel graphics (HD 3000) to a card that would fit in my current workstation. I apologize in advance for the length of the results here but I was trying to provide all the info and not waste Forum members
• Video

  10 answers, most recent on 3/9/2015

  My system good for 4K?
  Hi guys (and gals), I am a sucker for the best possible video quality and would like to go 4k and change my current Sony HX-50V camera for a Panasonic Lumix-DMC LX100 (here's a review in case you're not familiar with the camera:
• Video

  85 answers, most recent on 10/3/2016

  RE: One-click frameserving from Vegas to Handbrake
  Yes, I understand that the basic premise of an "update" is that you will have new features that will let you do more things, do them better, or do them faster. My point was that with most modern software, the list of new features that actually make
• Video

  8 answers, most recent on 2/27/2015

  iEEE 1394 and Windows 8.1
  Hey Guys/Gals, I'll been around a while and continuing to edit. Recently upgraded my rig to this decade. Computer Brand/Model: Home Build Operating System: Windows 8.1 64-bit RAM: G.Skill Z- 2133 16gb Processor: Intel i7 4930k Video Card: Nvidia