• Video

  28 answers, most recent on 1/2/2025

  RE: Who (still) uses VegasPro to edit camera footage?
  I use all sorts of consumer formats from about 1980 on. Currently my usual cameras are A7-IV and AX700 and iPhone 13 up to 4K. I also use Gopro, DJI drones and other phones. Sometimes captures from MiniDV, Hi8, betamax and VHS. Sometimes 60 and 50Hz
• Video

  41 answers, most recent on 10/9/2025

  RE: GoPro Hero 5 Black video probem
  The original video is poor as if it was encoded with a low bitrate. It's not just the road that is bad. Look at the grass areas. But media info shows the original bitrate as 45 Mb/s which is more than adequate for good quality 1080. Likewise the
• Video

  51 answers, most recent on 7/8/2025

  RE: 8k hevc decoding problem (nvidia)
  @relaxvideoDoes Vegas play this file with GPU decoder? https://www.mediafire.com/file/ia365n7556capk7/P1025412.MOV/file Above 4k below 8K, you may already have some gopro 5.*K HEVC footage.
• Video

  32 answers, most recent on 6/17/2025

  RE: Big problems with 9070 XT
  Hi thanks for the reply. I'm at work and only got my laptop so can't check with Mediainfo. It is gopro footage at 5k 30, insta360 at 4k 30, drone at 4k 30 and nikon at 4k 30. I've got plenty of HDD space (100gb). I was just able to render on my
• Video

  41 answers, most recent on 10/9/2025

  RE: GoPro Hero 5 Black video probem
  @Ruby888 I find your post a small bit confusing, maybe because i'm not familiar with gopro footage. The 1st video info is for mp41 which is considered nowadays to be near obsolete codec. The 2nd. one, avc, looks ok. Can you post mediainfo output of
• Video

  9 answers, most recent on 2/14/2025

  RE: What can I do to speed up 4K render?
    I am only using the sharpening FX at half-strength, and I think even that may be too much. Sharpening on the source recorder (GoPro) was set to "low". Never had the need to sharpen in post a 4k recording. Keep in mind that rendering is the final
• Video

  21 answers, most recent on 4/21/2024

  GOPRO VIDEO FORMATS
  I am looking to buy a Go Pro video camera. I see it does 5K format and I also see 1080P. I am using Vegas Pro 18. I don't believe I can edit 5k with that version. I suspect I can choose the 1080P resolution but they (Amazon and reviews) don't
• Video

  323 answers, most recent on 10/20/2025

  RE: VEGAS Pro 23 build 278 General Discussion
  @BogdanRSC @RogerS @Reyfox My two cents here: If you look in my signature, notice the "All AMD" computers (CPU & GPU). Three Canon cameras, all 4:2:2 10-bit CLog3 IPB (not IPB light), and the bitrate is around 170 Mbps, which I always use, along
• Video

  20 answers, most recent on 12/21/2024

  RE: [Closed] Questions about Vegas Pro Color Range
  I went through my library of media and found multiple cases where MxCompound is reading the metadata differently from MediaInfo (and I assume wrongly).Main issues were with HEVC media (Canon, GoPro) and also MXF AVC from a Sony FS7.If anyone finds
• Video

  25 answers, most recent on 9/10/2024

  RE: Vegas 21 (315) Lag when handling clips (Trimming and Moving)
  @Former user I am not concerned with playback speed on the timeline. I am concerned with editing/trimming on the timeline. If I want to playback my files, i just open up the folder where my GoPro footage is (and even the CLOG3 from my Canons'),
• Video

  6 answers, most recent on 6/7/2024

  RE: Vegas Edit 21 Upgrade
  @mhammann57 I use a GoPro11, Vegas Pro Edit 21 is a lot better than previous versions esp VP18, I've tried pretty much every GoPro format inc 5.3 & playback is pretty much flawless (No proxies). In previous versions I had stuttering, layback
• Video

  9 answers, most recent on 2/14/2025

  RE: What can I do to speed up 4K render?
  Thanks @RogerS. Is there any rendering speed advantage by applying FX at the track level versus event level? I typically copy and paste the same LUT, minor color grading, and sharpening to all the clips in my track, then view each media event and
• Video

  16 answers, most recent on 9/15/2024

  RE: Vloggers/Youtubers, what camera + capture method do you use for Vegas?
  I have an Osmo Pocket 1, 2, and 3 and a couple of GoPro cameras. I just copy the files off the cards and drop them on the timeline. They all work just fine. Motion JPEG is not a good option. I'd see if the camera can capture in a different format.
• Video

  28 answers, most recent on 1/2/2025

  RE: Who (still) uses VegasPro to edit camera footage?
  Present day: Camera RX10 m4, phone Samsung S22 ultra. Past: and still have older video taken on videotape like mini DV (or was it VHS-C even prior Year 2000), old Gopro and early models of digital consumer photo cameras (with limited filming
• Video

  19 answers, most recent on 7/18/2024

  RE: Rendering takes so long 5,3k 60fps 10bit Nvenc
  Yeah, rendering goes well. so maybe footage too hard for this? I'm recording on gopro12 using these specs
• Video

  78 answers, most recent on 10/1/2025

  VP22 vs VP23 rendering speed, VP23 ½ slower than VP22...?
  I just downloaded the Trial & tested a very recent project created in VP22. (didn't want to hijack someone elses post) Exactly the same project, a mix of Samsung S23 phone clips & GoPro11 clips, all UHD 29.97fps. MediaInfo says variable for
• Video

  152 answers, most recent on 10/30/2024

  RE: VEGAS Pro 22 Build 122 General Discussion
  I tried reproducing it and it rendered in a couple minutes. One unique thing about the video clips I was working on was it was created in 21 and then opened in 22. It was about 50 clips. All GoPro 4k 120fps. About have stretched to slow motion. Then
• Video

  152 answers, most recent on 10/30/2024

  RE: VEGAS Pro 22 Build 122 General Discussion
  @Jeffrey-Stachowiak without the actual project where the AI is used, it's hard to know where the issues might be. I've used AI Dehaze on images with quick results. @iEmby the Hub is working right now for me in VP22. Yay! GoPro 4k 120fps video 8
• Video

  6 answers, most recent on 6/7/2024

  RE: Vegas Edit 21 Upgrade
  @mhammann57 i7-13700K / RTX 3060ti (FE) here. For what its worth, I shoot with a GoPro 10, Fuji XT-4 (ALL-I, 400mbps), and a GoPro 5, all in 4K. For the GoPro 5, it's in to GyroFlow for stabilization and lens correction, and then out to
• Video

  48 answers, most recent on 5/6/2024

  RE: [Solved] GoPro timecode/timestamp access?
  So...here are the two scripts from @NoKi I'd like to flag as the solution for this thread:This script is used to get the timecode from clips selected in the project media area. It can be edited to shift the time code, if needed, to correct
• Video

  21 answers, most recent on 4/21/2024

  RE: GOPRO VIDEO FORMATS
  Ok Thank you. I will consider that the solution and try to seek more information from GoPro or a user group. Thanks for all your help.
• Offtopic

  17 answers, most recent on 4/30/2024

  RE: Samsung S23 Ultra camera video audio out of sync.
  .. you need to go into the GoPro app to do that ... Not at all ... I just swipped down on GoPro's window and then swipped left and the Preferences menu button (it is large) appears - click on it and the options including 'Anti-Flicker' opens up.
• Video

  11 answers, most recent on 5/2/2024

  RE: Who was able to set up CineForm in vegas 21?
  My understanding is that GoPro CineForm is an open source video code, not a video OFX plugin. Video codecs are built in to Vegas Pro as part of its program and aren't able to be user-installed as can be done with OFX and VST plugins. You can put in
• Video

  19 answers, most recent on 7/18/2024

  RE: Rendering takes so long 5,3k 60fps 10bit Nvenc
  ... it may just be that this GoPro footage is hard to decode so try to choose different settings in your camera that are easier to edit or be patient with your renders. Agreed. The GoPro settings are at its maximums: 5,3k 60fps and 10bit ... but