• Video

  939 answers, most recent on 6/4/2023

  RE: [Closed] Post Your VEGAS Creations!
  @fr0sty "Here's another video we shot, this one isn't recap style, but a multicam full-song edit. One of the best looking light rigs I've ever personally filmed, especially once they start up the lasers." This one held up well on youtube considering
• Video

  3 answers, most recent on 3/6/2018

  RE: Vegas 15 is very disappointing - 14 seems to be a lot better
  When rendering with an Nvidia GPU supporting NVENC, Vegas 15 runs circles around 14. I encode 4K multicam at real time or faster, even with basic effects applied. I have not noticed any slowdown at all using CPU renders, either, so I'm not sure what
• Video

  10 answers, most recent on 2/25/2018

  RE: Multicam Script
  Apologies to add a message to this rather old thread but I regularly work in VEGAS Pro's multicam edit mode and, as is the original poster, would like to somehow automate the 1st rough cut process, i.e. letting VEGAS Pro split the multicam track at
• Video

  252 answers, most recent on 5/22/2018

  RE: VEGAS Pro 15 Update 3 (build 311) - General Discussion
  @MagixDerek THANK YOU!!!Here is detailed a list of what always reproduces it for me: Windows 10 new install last August on new PC, updated to current level. Has happened on the 15 base, 216, 261 and 311 builds. Editing 4 to 6 video tracks in
• Video

  3 answers, most recent on 2/23/2018

  RE: Windows gpu monitor accurate?
  I should have said my interest is in multicam preview, vs better speed with a wider range of fx. Multicam mode doesn’t even apply fx. And I have pretty good fps displaying only the selected track in Best mode. It’s try to select tracks in a 6 track
• Video

  3 answers, most recent on 2/23/2018

  Windows gpu monitor accurate?
  The Windows task manager now has a column for GPU, but it is always low - about 8 - 15%. But I have a AMD Fury x that has a line of lights that shows activity, and it shows 100% in heavy tasks like multicam preview and render. In Process mode, the
• Video

  252 answers, most recent on 5/22/2018

  RE: VEGAS Pro 15 Update 3 (build 311) - General Discussion
  [XAVC-S Timecode issue] - For the record: FullHD 50p clips TC IN & OUT information does now read correctly it seems. But this still does Not work for 4K/25 clips. Those still don't show Timecode In. (can someone else please confirm) Beware
• Video

  252 answers, most recent on 5/22/2018

  RE: VEGAS Pro 15 Update 3 (build 311) - General Discussion
  [XAVC-S Timecode issue] - For the record: FullHD 50p clips TC IN & OUT information does now read correctly it seems. But this still does Not work for 4K/25 clips. Those still don't show Timecode In. (can someone else please confirm) Beware
• Video

  252 answers, most recent on 5/22/2018

  RE: VEGAS Pro 15 Update 3 (build 311) - General Discussion
  @cornico, you aren't using multicam, and although I saw a couple of pan/crop windows, I didn't see you actually set anything, especially keyframes. This is what I do, 4 - 6 camera multicam with almost every cut using pan/crop with keyframes.
• Video

  252 answers, most recent on 5/22/2018

  RE: VEGAS Pro 15 Update 3 (build 311) - General Discussion
  @Christian de Godzinsky, what limitation/errorneous functionality do you find in multicam mode? I use it 99% of my projects and the only thing I don't like is having to use Media level fx for cameras that make a new file at 2/4GB. And that's because
• Video

  252 answers, most recent on 5/22/2018

  RE: VEGAS Pro 15 Update 3 (build 311) - General Discussion
  Very disappointed here too with the latest bug fix release. Many major issues are still not fixed. The bug list is long as father Xmas beard.  Lots of hang-ups and crashing for no reason - just during editing without even attempting
• Video

  252 answers, most recent on 5/22/2018

  RE: VEGAS Pro 15 Update 3 (build 311) - General Discussion
  Hi Fiola, My system (built around a Radeon RX470 GPU) is entirely different from yours and this may not be helpful to you but since I installed Windows 10 Fall Creators Update (1709) which I held off for a certain period of time, I suffered a lot of
• Video

  6 answers, most recent on 2/12/2018

  RE: Multicam Edit
  Are you asking how to apply a FX to an event in the multicam track? Yes. Thank you....
• Video

  6 answers, most recent on 2/12/2018

  RE: Multicam Edit
  How? Are you asking how to apply a FX to an event in the multicam track? If so, it works the same way as it does in a simple video track. Every "section", between two cuts or the beginning and end of the multicam track, are basically single events.
• Video

  8 answers, most recent on 2/6/2018

  RE: VP15 (b261) - fundamental error when expanding tracks from multicam
  While I almost never use fades in multicam editing, I also have to expand to seperate tracks for color correction, because I usually have lots of footage in P2 format, which sadly is not supported correctly by Vegas. Instead of recognizing the
• Video

  8 answers, most recent on 2/6/2018

  RE: VP15 (b261) - fundamental error when expanding tracks from multicam
  must be done in Vegas AFTER the multicam edit. Maybe in your workflow, certainly not in mine. “There are many ways to skin a cow”
• Video

  8 answers, most recent on 2/6/2018

  RE: VP15 (b261) - fundamental error when expanding tracks from multicam
  Hi, Thanks all for your comments. Yes - I certainly have learned to save versions. Especiall before going into multicam mode! If you remember the first ridiculous implementations of this feature you also might remember that there was no way back -
• Video

  8 answers, most recent on 2/6/2018

  RE: VP15 (b261) - fundamental error when expanding tracks from multicam
  Hi, Just finalizing an 1,5 hour multicam project. Done with editing of 4 cameras in the multicam mode for the first time. The majority of transition are 2 second fades. So far smooth sailing, just some crashes but I'm used to save
• Video

  8 answers, most recent on 2/6/2018

  RE: VP15 (b261) - fundamental error when expanding tracks from multicam
  The other must-do in my workflow is to save full second copy of all Media synched on the timeline, before creating the multicam track. That way it's right there if something goes terribly wrong.
• Video

  8 answers, most recent on 2/6/2018

  RE: VP15 (b261) - fundamental error when expanding tracks from multicam
  I don't know about those issues, on Version 12 I have not had problems expanding a multicam. But you can apply your color corrections to the clips in the Media bin and they will stick regardless of multicam.
• Video

  8 answers, most recent on 2/6/2018

  VP15 (b261) - fundamental error when expanding tracks from multicam
  Hi, Just finalizing an 1,5 hour multicam project. Done with editing of 4 cameras in the multicam mode for the first time. The majority of transition are 2 second fades. So far smooth sailing, just some crashes but I'm used to save
• Vegas Movie Studio (up to ver. 17)

  10 answers, most recent on 2/6/2018

  RE: Multicam functionality in MovieStudio 14
  Thanks, VK - that makes it clear that multicam track re-expansion is a Pro-only function. I guess it's important to have some product differentiation, given that Pro is substantially more expensive than MovieStudio; clearly it's these sort of things
• Vegas Movie Studio (up to ver. 17)

  10 answers, most recent on 2/6/2018

  RE: Multicam functionality in MovieStudio 14
  A discussion on the multicam workflow in VEGAS Pro and VEGAS Movie Studio 14 Platinum in this article by the Vegas team.
• Vegas Movie Studio (up to ver. 17)

  10 answers, most recent on 2/6/2018

  Multicam functionality in MovieStudio 14
  Multicam editing is pretty essential for me now I'm recording events with four cameras. But am I right in assuming that the Multicam functionality - greatly appreciated in MS14 (currently Build 148) - is reduced compared to Vegas Pro? In particular,