VEGAS Pro 15 Update 8 (build 416) - General Discussion

fifonik wrote on 11/25/2018, 8:52 PM

Just discovered that VP15 build 8 was released last week.

For some reason there is no discussion thread for the release so I created this one.

To be honest, after "huge" change log in Update 6/7 I have not expected this update at all and I'm extremely excited and looking forward to install and check it as my last "show stopper" is finally fixed it this update. Wow!

Camcorder: Panasonic X920

Desktop: MB: MSI B350M PRO-VDH, CPU: AMD Ryzen 1600, RAM: G'Skill 16 GB DDR4 2400, Graphics card: MSI RX470 4GB, SSD: Samsung 850 EVO SATA 250MB, HDDs: Seagate & Toshiba 2TB, OS: Windows 10 64-bit 1809

NLE: Vegas Pro 11, 12, 13, 15

Comments

j-v wrote on 11/26/2018, 6:53 AM

Just discovered that VP15 build 8 was released last week.

You are a little late

For some reason there is no discussion thread for the release so I created this one.

Probably you missed this post incl. comments

met vriendelijke groet
Jan

Camera : Pan X900,GoPro Hero7 Hero Black
Desktop :AsRock Z270 Pro4, W10 , i7 7700K 4.2Ghz,16 DDR4 GB RAM, Gef. GTX 1050 Ti.
Laptop  :Asus ROG GL753VD, W10 home, version1803 build 17134.407, CPU i7 7700HQ, 16 GB RAM, GeF. GTX 1050 (2 GB) + Int. HD Graphics 630(2GB).
Both Nvidia GPU's have driver version 430.86 Studio Drivers
TV      :LG 4K 55EG960V

Dutch video tutorials for beginners

My slogan is: BE OR BECOME A STEMCELL DONOR !!!

Red Prince wrote on 11/26/2018, 5:15 PM

my last "show stopper" is finally fixed it this update. Wow!

What was it?

He who knows does not speak; he who speaks does not know.
                    — Lao Tze in Tao Te Ching

Can you imagine the silence if everyone only said what he knows?
                    — Karel Čapek (The guy who gave us the word “robot” in R.U.R.)

fifonik wrote on 11/26/2018, 6:55 PM

Probably you missed this post incl. comments

Well, I do not usually reading the News section so yes, I missed the announcement. However, I already read that and link in the OP was exactly to this post.

Also, in the news section usually only announcements and in Video section are discussions.

Anyway, sorry for everyone who think that discussing necro-VP15 should not be here any longer :)

 

What was it?

The issue with NeatVideo missed frames preview when it is placed in chain before pan/crop (all projects where NeatVideo required and that were started in VP15 were on hold).

Camcorder: Panasonic X920

Desktop: MB: MSI B350M PRO-VDH, CPU: AMD Ryzen 1600, RAM: G'Skill 16 GB DDR4 2400, Graphics card: MSI RX470 4GB, SSD: Samsung 850 EVO SATA 250MB, HDDs: Seagate & Toshiba 2TB, OS: Windows 10 64-bit 1809

NLE: Vegas Pro 11, 12, 13, 15

BobMoyer wrote on 11/27/2018, 9:18 AM

@fifonik, thanks for creating this thread. There seems to be a couple of issues being reported on the other thread under the "news" forum but probably unread by many of the users here.

OldSmoke wrote on 11/27/2018, 11:57 AM

@fifonik, thanks for creating this thread. There seems to be a couple of issues being reported on the other thread under the "news" forum but probably unread by many of the users here.

Yes, I have the same feeling and I don't understand why this is not in this forum. Here is what I posted over there:

I just updated to the latest build of VP15 and may have stumbled across a bug.

I tried to selectively prerender an event using Magix AVC with VCE and that didn’t work. The project is a 4K project with XAVC-S files from my a6300. I can see the prerender is running but when finished I don’t get the bar across the selected section indicating the prerender and the playback is slow which means Vegas doesn’t read the prerendered file. It does however work with other codecs like XDCAM and even MagicYUV. Can someone else with an AMD card and VCE confirm my findings?

Can anyone confirm this?

 

Last changed by OldSmoke on 11/27/2018, 9:49 PM, changed a total of 1 times.

Proud owner of Sony Vegas Pro 7, 8, 9, 10, 11, 12 & 13 and now Magix VP15&16.

System Spec.:
Motherboard: Intel DX79SR
Ram: G.Skill 8x4GB DDR3 2133 (running at 1600 and lower latency)
CPU: 3930K @ 4.3GHz (custom water cooling system)
GPU: 1x ASUS Fury-X
Hard drives: 4x 2GB WD Red in RAID 5 (with Hot Spare), 2x Crucial 256GB SSD in RAID 0 (mulitcam project drive), 1x Samsung 850 Pro 256GB SSD (System), 1x Crucial 64GB SSD (temp files and swap file), 1x 3.5" Hotswap Bay, 1x LG BluRay Burner
PSU: Corsair 1200W
Monitor: 2x Dell Ultrasharp U2713HM, 1x Sony HDTV 32" preview monitor

fifonik wrote on 11/28/2018, 12:15 AM

Tried to pre-render using Magix AVC VCE and gor the same issue.

Worked fine with Magix Intermediate.

Camcorder: Panasonic X920

Desktop: MB: MSI B350M PRO-VDH, CPU: AMD Ryzen 1600, RAM: G'Skill 16 GB DDR4 2400, Graphics card: MSI RX470 4GB, SSD: Samsung 850 EVO SATA 250MB, HDDs: Seagate & Toshiba 2TB, OS: Windows 10 64-bit 1809

NLE: Vegas Pro 11, 12, 13, 15

OldSmoke wrote on 11/28/2018, 9:17 AM

@fifonik Thanks for confirming it. Now I wonder if that happens in VP16 too.

Proud owner of Sony Vegas Pro 7, 8, 9, 10, 11, 12 & 13 and now Magix VP15&16.

System Spec.:
Motherboard: Intel DX79SR
Ram: G.Skill 8x4GB DDR3 2133 (running at 1600 and lower latency)
CPU: 3930K @ 4.3GHz (custom water cooling system)
GPU: 1x ASUS Fury-X
Hard drives: 4x 2GB WD Red in RAID 5 (with Hot Spare), 2x Crucial 256GB SSD in RAID 0 (mulitcam project drive), 1x Samsung 850 Pro 256GB SSD (System), 1x Crucial 64GB SSD (temp files and swap file), 1x 3.5" Hotswap Bay, 1x LG BluRay Burner
PSU: Corsair 1200W
Monitor: 2x Dell Ultrasharp U2713HM, 1x Sony HDTV 32" preview monitor

supergafudo wrote on 11/29/2018, 4:33 AM

wow thank you for this update, really apreciated.

The only part AMD VCE is still broken is that you cannot change the resolution, only use the one that comes preselected. If you check the "use project resolution" the soft bypass it and use the preselected one.

So I still need to export to handbrake and render using VCE to use manual resolutions.

But thank you for this update.

Reyfox wrote on 11/29/2018, 8:46 AM

Oh... I too was not aware of the new patch for VP15. Now that I have VP16 (just got it yesterday), I'll have to look at AMD VCE .......

Nick Hope wrote on 12/10/2018, 11:12 PM

I added "[VP15+] Selective Prerender does not work with MAGIX AVC/AAC in VCE mode." to the known issues post. Has anyone reported it? If not, please do so via a support request, with details of GPU and its driver version. @OldSmoke @fifonik @matthias-krutz