• Video

  6 answers, most recent on 12/3/2019

  RE: Audio not synced in speeded up parts after enabling multi cam editing
  Before I use multicam mode, I always save a version as it is. Then you can revert if something goes wrong such as this.
• Video

  6 answers, most recent on 12/3/2019

  Audio not synced in speeded up parts after enabling multi cam editing
  I spent a few days editing lots of clips with a lot of those parts speeded up 400%. I then added a second video track at about the 10 minute mark and enabled multicam editing. Now all of the previous speeded up parts have audio that is out of sync
• Video

  No answers, created on 12/1/2019

  Vegas not remembering button/state after exit/start for Multi-cam
  As we try making the native Vegas multi-cam workflow working for us, I've encounter some oddities perhaps others have run across.. wondering if this is a bug or some settings we're overlooking? Here's one. After setting up the multi-cam project and
• Scripting

  6 answers, most recent on 11/28/2019

  RE: Group placing inside region/regions
  When you click Apply to place multicam events within the Region Vegasaur creates a crossfade on the first or last event hack to try to adjust multicam events within the region. This is as expected and vegasaur is working correctly in this case.
• Video

  6 answers, most recent on 11/30/2019

  upgrading video card RX590 or GTX1660
  hi All, i will be heading out to upgrade mu video card tomorrow. 209.00 for an gigabyte RX590 and 279.00 for a gigabyte GTX1660. my system consists of an msi gaming pro x470 mb, 48gb ram, Ryzen 7 2700x,2 x 500 gb ssd, 2 x 3 tb hhd's. i am running
• Video

  11 answers, most recent on 12/1/2019

  RE: Building a proxy (pre-rendered) video to speed up multi-cam editing
  Thanks for the reply! I understand Vegas proxies are large uncompressed files which make them quick for decode, but large in size. Throw that up with 7 or 8 concurrent streams multicam and I am pretty sure Vegas will drop frames when editing in fast
• Video

  11 answers, most recent on 12/1/2019

  RE: Building a proxy (pre-rendered) video to speed up multi-cam editing
  Vegas does have a proxy system, just right click on a clip in project media and select "create video proxy" (you can ctrl+a all clips to do this quickly). This creates 720p proxies of all the clips that are only visible if preview quality is set to
• Video

  21 answers, most recent on 11/25/2019

  RE: VP17 Build 353 Unusable - Reinstalled B321. Back working . . . so far
  Before build 321 I got 2-3 crash in editing per project. Mostly freeze when I try to click here and there. But acceptable to work to finished the project. Build 321 is the best one. Edited and finished multicam project that is 1hrs 30minutes long.
• Video

  11 answers, most recent on 11/17/2019

  RE: Multiple cameras choppy playback and slow render times VP14+
  Thanks for the recommendation; I don't have Excalibur, and I don't plan any multicam projects now that I'm retired from theatre production.
• Video

  11 answers, most recent on 11/17/2019

  RE: Multiple cameras choppy playback and slow render times VP14+
  Hey @Musicvid.. I'm a huge Excaliber fan for our multi-cam work -- it's nondestructive way of editing and only building the master track upon completion is superior IMO -- the ability to apply event-level FX, pan/crop, etc and have them preserved.
• Vegas Movie Studio (up to ver. 17)

  3 answers, most recent on 11/14/2019

  Crossfade between multiple clips
  Using Movie Studio 16 Platinum on Windows 10. I understand how to add transitions between clips by selecting all the clips using shift and clicking the first and last clip. What I cannot figure out is the following. I want each crossfade to last
• Video

  6 answers, most recent on 11/12/2019

  RE: heavy multicamera editing
  1. Upgrade to a modern Nvidia GPU (10 series or later, RTX preferred). The hardware decoding they support in Vegas can give lots of extra mileage when it comes to editing multicam smoothly. 1/2 OFF: It is interesting to read recommendations to
• Video

  6 answers, most recent on 11/12/2019

  RE: heavy multicamera editing
  1. Upgrade to a modern Nvidia GPU (10 series or later, RTX preferred). The hardware decoding they support in Vegas can give lots of extra mileage when it comes to editing multicam smoothly. 2. In the mean time, make proxies. It takes some time, but
• Video

  8 answers, most recent on 11/11/2019

  RE: "Create Multicamera Track" is greyed out VP 16
  Be Sure to back up all your tracks before creating a Multicam Track. You'll find out why during editing.
• Video

  9 answers, most recent on 11/10/2019

  RE: So my G9 gets 10 bit 4:2:2, since it reads my 8bit ......
  10 bit vlog video definitely decodes slower in Vegas, I proxy any multicam stuff I do in 10 bit, but the added color and dynamic range is worth it.
• Video

  74 answers, most recent on 11/11/2019

  RE: Proxy for still images?
  "I use punch-in recording on an audio track while in loop record mode which creates multiple takes on top of each other which I can select between which one is take is active." That's the concept of looped punch-in recording, where Takes are added
• Video

  74 answers, most recent on 11/11/2019

  RE: Proxy for still images?
  "I use punch-in recording on an audio track while in loop record mode which creates multiple takes on top of each other which I can select between which one is take is active." That's the concept of looped punch-in recording, where Takes are added
• Vegas Movie Studio (up to ver. 17)

  13 answers, most recent on 6/15/2021

  RE: using source timecode
  BTW, timecode sync and multicam only works in Vegas Pro as well, not Movie Studio. I've been under the impression we were on the Pro forum, my bad. Giving us the specs on an external t/c generator is no different than internally generated timecode
• Video

  255 answers, most recent on 12/9/2023

  RE: Crash after about 3 minutes of editing "nvopencl64.dll" error
  as you see I am not using the multicam feature integrated into VP what I am doing is taking three video tracks syncing them, using the best sound track grouping them and deleting the other two sound tracks and cutting the video track where I want to
• Video

  255 answers, most recent on 12/9/2023

  RE: Crash after about 3 minutes of editing "nvopencl64.dll" error
  I am on V16 and I am not that familiar with multicam - hopefully someone else can test & comment. IIRC there have been issues like this in the past with multicam & UI memory leaks. Vegas 15? I will keep testing. I feel like you are on the
• Video

  255 answers, most recent on 12/9/2023

  RE: Crash after about 3 minutes of editing "nvopencl64.dll" error
  well got the first crash when doing multicam.. let me put the video together and
• Video

  11 answers, most recent on 10/1/2019

  RE: GPU for VP17
  8 core is the minimum CPU spec for 4k in Vegas 17. I use a Radeon 7 and cannot do 4k multicam mode with 4 4k angles without building proxies, with a Ryzen 7 1800x 8 core 16 thread CPU and 64GB DDR4. NVENC Decode will dramatically accelerate your
• Video

  5 answers, most recent on 9/17/2019

  RE: multicam edit lecturer+powerpoint+composite of both
  You don't have 3 shots, only 2. no need for multicam. So place your main presenter 4K in one track and the PPT on next track in basic PIP. cut for the relevant content first and then go back and modify for the composition you need.  
• Video

  5 answers, most recent on 9/17/2019

  RE: multicam edit lecturer+powerpoint+composite of both
  I have never tried it but maybe nesting the track with all the tracking into a multicam project could be a solution?