• Video

  One answer, on 2/13/2024

  Motion track is not working properly
  See 8:13 in that video: Guys, you should repair this. Why do we have to instant delete all keyframes from "picture in picture" mode and apply "picture in picture" effect again to these feature (motion tracking) works?I want to set my lower third for
• Video

  20 answers, most recent on 4/8/2024

  RE: Motion Tracking - Effect not found?
  @Blacksands If the motion tracking plugin is unable to load into VEGAS, it is often due to some conflict it is having with the hardware on your system, as this plug in very dependent on both the CPU and GPU. Please provide this information so we
• Video

  670 answers, most recent on 3/14/2026

  RE: VEGAS Pro Feature Requests
  Automation Recording for OFX keyframes (as well as Pan/Crop and Track Motion).   In fact, as early as Sony Vegas era, this feature has been implemented on DXT plug-ins.If you don't know what this is, see: This feature has even been retained in the
• Video

  4 answers, most recent on 11/11/2024

  RE: motion tracking issues
  So the consensus is that vegas 22 doesnt use AI for its motion tracking. I don't remember where I heard it did, I think it was some of the marketing hype that referred to the motion tracking as AI, or it may have been stated on one of the numerous
• Video

  9 answers, most recent on 12/17/2023

  RE: Easy way to extend slow mo clips automatically
  Vegas' Slow Motion fx does all of this automatically, using optical flow resampling. For slowing down of 60fps to 30fps, no resampling is needed. Just when framerate of slomo should stay 60fps, resampling with optical flow is useful.
• Video

  15 answers, most recent on 3/13/2026

  RE: how to use z-depth 3d render pass for depth of filed blur in vegas 23
  I'm not sure of a built-in way to control blur with another black and white depth map image, the best approach I can think of is to set the track with the depth mask on it to the Multiply composite mode. Make 2 copies of your video, one with a blur
• Video

  31 answers, most recent on 4/13/2024

  RE: Vegas Pro 20 (Build 411) - Issue With Track Motion
  @MH7 and everyone else. I turned off GPU acceleration in Preferences>File I/O, and Video. Then everything worked as it should. Not shifting. Hmm…that’s interesting. I wouldn’t’ve thought Track Motion used GPU acceleration. I will definitely try
• Video

  6 answers, most recent on 3/5/2026

  RE: An alternative to Pan&Crop?
  @Sunky All I can say is that Pan/Crop is almost the fundamental logic of VEGAS Pro. It cannot be replaced by any other FX. Before Pan/Crop, FX processes the raw video footage, and the content will be "rasterized" to the resolution of the project by
• Video

  31 answers, most recent on 4/13/2024

  RE: Vegas Pro 20 (Build 411) - Issue With Track Motion
  @MH7 This is what I get with VP21 This is what I get with VP20 Notice the inverted chevrons on the track header. Are you seeing these? This signifies track motion has been applied.
• Video

  13 answers, most recent on 7/4/2024

  RE: Video rendered with all footage sped up.
  This is odd: Frame rate                               : 7 495.659 FPS How exactly did you generate this media? I watched through the video and don't see any point where the audio and video is out of sync or the video seems to be moving in fast
• Video

  218 answers, most recent on 3/25/2026

  RE: Post Your VEGAS Creations - 2
  A promo video for a murder mystery performance that one of my businesses is putting on soon... Real quick, low (no) budget... I didn't even use a pro mic on the camera, I ran the camera mic audio through AI to remove background noise and make it
• Video

  20 answers, most recent on 3/13/2024

  RE: Conversion from 25 fps to 23.976 fps
    great found it, what is it for and when exactly should I use it? Actually it generates the extra frames needed to get the new framerate. Optical flow is not always generating perfect frames, it works quite good for generating extra frames for
• Video

  3 answers, most recent on 3/26/2024

  RE: [Feature Request] Skip morphed frame on Optical Flow sampling of Cuts
  It's like with stabilisation, you stabilize each clip separately and not a whole movie at once. So I'm with @Former user that scene detection is a must before starting resampling a whole movie (which I still doubt is necessary todays, to convert
• Video

  320 answers, most recent on 5/24/2024

  RE: [Closed] VEGAS Pro 21 Build 108 General Discussion
  Does anyone else think the Motion Capture is just plain awful? I miss the Vegas 17 Bezier method. I'm considering a refund. The Ai Masking sucks too
• Video

  7 answers, most recent on 9/15/2023

  RE: Motion Tracking
  Quite a lot of tutorials for VP16 motion tracking. A d Gary announcing it, eg
• Offtopic

  2 answers, most recent on 9/16/2024

  RE: Video Magic Wand (software)
  If I understand your post correctly, Vegas already has a well developed feature to convert video to image sequences (jpg, tiff, or png), import them to the timeline, and reconstruct them to video. This is an especially important feature for high
• Video

  49 answers, most recent on 12/7/2024

  RE: Vegas Pro Post 365
  And I'm not sure that Vegas can be retooled to add in what Effects does. Sure, as you say, they could enhance the masking engine, and add some of the effects. But what about Behaviours? Cameras (and thus camera projection)? Lights? Proper 3D ... All
• Video

  25 answers, most recent on 7/10/2023

  RE: video is blocky/choppy
  50 and 25, yes for PAL land. You can use it for slow or normal motion. 24fps, just slow motion. Did you watch the video I linked to?
• Video

  9 answers, most recent on 12/5/2024

  RE: Image stabilization
  You are facing two issues that cause your Video Preview to look choppy, both of which are a temporary overload of your CPU cycles: 1. The added Stabilizer Effect puts a heavy load on your CPU, causing jittery playback. 2. The complex
• Video

  2 answers, most recent on 6/2/2023

  Motion tracker disappears
  I can't find my motion tracker.But this seems like a larger problem. Whenever I try to add additional motion tracking, they somehow get linked with one another in various ways.Right now, I can't see any motion tracker on the screen. This happened
• Video

  4 answers, most recent on 9/15/2023

  RE: Crop & Border - At track level
  My goal was to create a thumbnail in a corner and zoom into the video inside it. (Track motion to reduce the size of the video plus two filters: Crop to simulate a zoom in and Border to smooth edges). Instead of cropping it I used the SmartZoom
• Video

  9 answers, most recent on 12/17/2023

  RE: Easy way to extend slow mo clips automatically
  Or you could write a script that changes the playback rate to .5 and makes the event twice as long. For video, there's also the "Slow Motion" effect which you could set the playback rate to .5 and then click the "Adjust Event Length" button.
• Video

  21 answers, most recent on 8/5/2023

  RE: VEGAS Pro Edit 19 stops responding in the middle of editing
  I miss the point to resample with frame blending 240 fps to 60 fps. Deactivate resampling or directly record with 60 fps. The point is I get some really clean motion blur. So if I switch to 60 FPS I won't get the motion blur.
• Video

  31 answers, most recent on 3/24/2025

  RE: One file in 4K ruins everything in Vegas
  I have a popular camera and I use it. Canon 5D Mark IV. That is by far one of the hardest acquisition codecs in existence to decode in Windows. The files are very complex, and the Quicktime architecture in Windows is a lot older than your camera