• Video

  200 answers, most recent on 1/24/2025

  RE: VEGAS Pro 21 Build 314 and 315 General Thread
  2. This bug first appeared in VP12 and still exists.If you mark all the video files in the folder with the shortcut CTRL+A in the Open window, you wait for a varying amount of time before this happens. Sometimes 5 seconds, sometimes 30. The wait is
• Video

  38 answers, most recent on 8/21/2025

  RE: 1080HD on 4K timeline?
  @3POINT I set up my camera on it's tripod & start filming, I generally film one action at a time, IE. I'll cut a piece of wood, that's one take, I'll then film the fixings (screws) I'm using, that's another take, these first two will most likely
• Video

  44 answers, most recent on 8/9/2024

  RE: Big test (and performance/bug report) comparing VP22 to VP 19
  I see in the project settings, that you work in 8bit full. While that can be done for editing, with 8bit you will not utilize the 10bit of your 10bit 420 HEVC footage really. To do so, you would have to switch the project settings to 32bit (what is
• Video

  12 answers, most recent on 6/5/2025

  RE: Shuttle ProV2_VP22
  Resurrecting an old thread, sorry!I just dug out my old Shuttle Pro 2 to use with Vegas 22 build 250, on Win 11. I have installed 2.13.5 of the Contour Shuttle Device Configuration app. I have imported the VEGAS Pro 22 --ShuttlePRO v2.pref settings
• Audio

  25 answers, most recent on 8/23/2024

  RE: Vegas renders a mono audio voice file with HEAVY distortion half way
  Russell-Gough, you asked "Did you try and render a file though?" in response to my post, where I had clearly stated "That original MP4 file behaves fine here in Vegas and SoundForge, both of which can render a clean WAV file identical to
• Video

  24 answers, most recent on 5/1/2025

  RE: No hotkey for "Selectively Paste Event Attributes"?!
  @RedRob-CandlelightProdctns for what purpose do you copy/paste event attributes? Isn't it easier to use track fx or an adjustment track/event to apply certain events with the same attributes. @3POINT Since you asked --- (it's not tooooo long an
• Video

  59 answers, most recent on 8/30/2024

  RE: Vegas 22 Pro - HDR still unusable (for me)
    I'll look forward to your thread! I need to do some more experimentation with the CinemaP3 app on the iPhone to see what codec is uses under various conditions. I have some footage that is DolbyVision and others that are not. I have found that
• Video

  18 answers, most recent on 3/1/2025

  VEGAS 20 (Build 411) ANY CLUE WHAT THIS CRIPPLING VISUAL GLITCH IS!?!?
  I have already made a thread about this recent problem I'm having (started a few months ago, I haven't changed anything on my end) but since nobody could provide answers I decided to create a new topic explaining this glitch a bit better. WHAT
• Video

  17 answers, most recent on 12/5/2023

  RE: V20 imports iphone file differently to V21 - Possible Bug?
  @andyrpsmith said: "Wonder why V21 is doing this and V20 does not?" The shade-tree cynical diagnostician responds: It's possible that every coder on the planet opens a new build of any software and, as soon as the seat of her office chair starts to
• Video

  16 answers, most recent on 12/3/2024

  RE: Vegas Pro 22 Preview rendering consuming all GPU VRAM, causing crashes
  General Media Info: Complete name                            : G:\36-Golden Stars.MOV Format                                   : MPEG-4 Format profile                           : QuickTime Codec ID                                 : qt
• Video

  32 answers, most recent on 7/3/2024

  RE: Stabilizer program suggestion
  In my opinion, Mocha Pro or Mocha Vegas is not going to do what you are wanting a stabilser to do. You wrote in the original post: I need this for interior videos of a home when my photographer is going around lets says a kitchen island in a 360
• Video

  148 answers, most recent on 9/13/2025

  RE: VP21 b300 - VP22. Still unresolved bugs with 4K MXF and HEVC files
  @RogerS, @Todd-AO, @john_dennis Dear colleagues.Today I tested a lot of MXF files in detail and the problem is more complex. 1. This file shows that MXF does not play smoothly in the Preview window even when the full number of frames is displayed.
• Video

  35 answers, most recent on 5/16/2024

  RE: Crashing ALL the time
  Hi again Michel Here are the correct links for updating your ASUS Motherboard and AMD 5800X CPU: 1. Download and install this Chipset Driver for Windows 11:https://www.amd.com/en/support/downloads/drivers.html/chipsets/am4/b350.html 2. Here is link
• Scripting

  25 answers, most recent on 3/25/2023

  RE: 📝⚙️(Script) Add Picture-in-Picture to the event.
  @jetdv Is it possible to make the script, before adding the PiP, check if the event already has a PiP? If the event already has a PiP, instead of adding another one, the script will only open the PiP adjustment window. PiP's Video Effect UI. If the
• Video

  8 answers, most recent on 6/21/2023

  RE: Vegas Pro 20 Crashing Video
  You basically have an issue with your GPU and you have just told Vegas to not use your GPU hence it runs OK. But you will not get any accelerated FX or timeline/preview. I expect you do not have the correct drivers for your NVIDIA GPU which is a
• Video

  4 answers, most recent on 1/14/2024

  Can I turn off automatic generation of proxies?
  I’ve completed multiple 2023 projects with hundreds of proxies, I will never edit the projects again and do not need the proxies. After deleting the proxies, I opened the project to make sure I didn’t break anything and found proxies were being
• Video

  15 answers, most recent on 9/23/2025

  RE: Multiple V23 Bugs: Color Grade Broken, 4x Slow Render, UX, Pan/Crop.
  Hi @RogerS! I understood your intro. My comment was direct feedback, not meant to criticize anyone negatively. I would love to have at least V23 working, after V21 and V22 failing. Answering your points: 1. Here's a clear example that is very
• Video

  9 answers, most recent on 2/23/2024

  RE: How to export video regions with file names?
  CTRL+R: But I've just realised that CTRL+R renders audio only - so that's not going to be of much help after all. Sorry about that.   However, CTRL+M will render the timeline - video and audio - to a new (higher) track. The area of the timeline
• Scripting

  42 answers, most recent on 7/20/2025

  RE: VEGAS Pro Scripts Collections | SHARE YOUR SCRIPT HERE !!
  Auto Render ScriptYou just need to save your favourite render templates if they are not already exists.Do it only once.this script will render your project at loop region as per your project settings by matching render template with it.. using
• Video

  2 answers, most recent on 8/6/2023

  RE: Unable to launch vegas pro 18
  Unfortunately, there's no history of that .dll being mentioned on the forum so there's no guidance available there. I see from FL Studio's website that in addition to its audio functions, it also has some video features - it may be that the .dll
• Video

  26 answers, most recent on 6/19/2024

  VEGAS Pro 22 running on ARM spotted at Computex!
  Hey folks! Just thought I'd share something interesting I saw last week while covering Computex for those of us who have been waiting on the next version of VEGAS Pro. At the Qualcomm suite they were demonstrating the new Snapdragon X Elite laptops
• Offtopic

  5 answers, most recent on 10/5/2024

  RE: Question for users of the Wolverine or Kodak style 8mm film xfer
  @DMT3 Hi, I have the Wolverine Movie Maker Pro. It records to 1080, 4:3, or 1440x1080 at 20fps. If you go for a Wolverine, get this one, not the less expensive one that records at 720 and can't take large reels. I estimated that it would cost me
• Video

  7 answers, most recent on 7/28/2023

  RE: D-Log M a 10 bit with Vegas Pro 20
  Definitely not a wizard but I've tried a lot of things in VEGAS. Glad that helped. ShutterEncoder is great for files that are even tougher to play back (like 10-bit 4:2:2 HEVC, variable framerate footage, screen captures, etc.) Re-encode them to
• Video

  6 answers, most recent on 3/27/2023

  RE: Flickering flash and blackout effects
  @debojitacharjee, that would be correct. Excalibur is a custom command and will not show up in VEGAS' VideoFX tab. so: Open Excalibur by going to View - Extensions - Excalibur. Then go to the the Video Effects tab INSIDE Excalibur.