• Video

  2 answers, most recent on 2/11/2020

  [Solved] Multicam editing
  When I switch to 'Multicam editing' the scene labels (i.e. maincam, left cam, etc) are very large when I use draft 1/4 or preview 1/4. Is there a way to minimize the labels without increasing the resolution of the frame. I have an up to date system
• Video

  8 answers, most recent on 12/23/2019

  RE: [Solved] Why do I need GPU if I'm not in a hurry?
  If editing HEVC or H264, the GPU decoding can enable you to edit more/higher resolution streams with real time performance, and getting GPU acceleration for certain plugins can also help keep that preview frame rate high. Sometimes it isn't so much
• Video

  15 answers, most recent on 6/5/2019

  RE: [Solved] Enable Multicam editing
  Try this: 1.Go to Options/Preferences and in Video go to Thumbnails to show in video event and choose NONE. This will cause the video memory used to generate thumbnails to be used in preview 2.Your Build Dynamic Ram Preview is greyed because your
• Video

  15 answers, most recent on 6/5/2019

  [Solved] Enable Multicam editing
  When editing 5 camera angles (all proxy tracks) plus several audio tracks with 'Enable Multicam Editing" enabled, my preview monitor is very choppy, even when set at Preview 1/4. I just finished editing a 5 camera angle shoot with no problem. The
• Video

  9 answers, most recent on 5/3/2019

  RE: [Solved] Unable to save Multicamera project in Vegas14
  @Eagle Six : I thought it was possible to work directly in the master project @Philbec As far as the nesting, you can edit the nested project like you would edit, change, modify, add Fx's, etc. like you can do with any other clip/event. What you can
• Video

  7 answers, most recent on 5/10/2019

  [Solved] Multicam editing
  Hi, I have a 4 camera shoot to edit and was using the vegas multicam edit function. It works really well, except for one annoying thing...if you make a mistake in one of the cuts you can't extend the clip of the previous cut (Premiere Pro allows
• Video

  16 answers, most recent on 3/19/2019

  [Solved] Somehow managed to mute all video tracks, and can't unmute?
  I'm not sure what I managed to do, but I've never had it happen in all my decades of using Vegas. I was editing a Mardi Gras parade in multicam mode. I finished my edit, went to expand back to multiple tracks, and somehow along the way all the video
• Scripting

  7 answers, most recent on 11/17/2019

  [Solved] Excalibur
  @jetdv Something "broke" my Excalibur add-in. I admit to not using it since V16 was released. I set up to do a multicam last night and there are no more drop down boxes to define the type of project (red 1920 by 1080 etc). When I engage the synch
• Video

  11 answers, most recent on 10/16/2018

  RE: [Solved] VP16 Multicam editing stops functioning after a while...
  When the problem occurs press ALT+D,D. This command returns Vegas to the default layout, but resolves this problem in multicam editing. It works for me, I'm not sure it will work for you.
• Video

  11 answers, most recent on 10/16/2018

  [Solved] VP16 Multicam editing stops functioning after a while...
  I've been editing a 3-camera seminar that lasted for several hours. So I have several hours X 3 cameras worth of footage wrapped into one Multicam Track in Vegas Pro 16. As the video plays, I select the take I want to display by clicking my mouse on
• Video

  11 answers, most recent on 5/5/2018

  [Solved] Preview looks way over bright and contrast, but there are no Fx
  So I've got a new one that has me stumped. Here is what I see... The clips on the left look exactly as I expect them too, and the preview (in multicam) is WAY over bright and the contrast is through the roof. I know for 100% that the look of the
• Video

  6 answers, most recent on 2/12/2018

  [Solved] Multicam Edit
  I lose the color correction on clips when I create an "MultiCamera track". After I create the MC track the video clips lose their color correction. Am I doing something wrong? Also, is there a better way to create a MultiCamera track that will allow
• Video

  12 answers, most recent on 8/14/2017

  RE: [Solved] Create cross fades for all selected cuts?
  Than the question is, why are you expanding the multicam track? I have never felt the need for it. And if you have to, apply the transition before you expand the track. OldSmoke, i need to apply coloration by camera, since they are not all the same
• Video

  12 answers, most recent on 8/14/2017

  [Solved] Create cross fades for all selected cuts?
  After a multicam edit, it would be nice to be able to select all cuts and create a default cross fade. Is there a way to accomplish this another way?
• Video

  12 answers, most recent on 8/11/2017

  RE: [Solved] Vegas Pro 13 multi camera video resolution down switching
  Did you already tried video proxies during the multicam session? Right click on file in Project Media and choose "Create Video Proxy"
• Video

  12 answers, most recent on 8/11/2017

  [Solved] Vegas Pro 13 multi camera video resolution down switching
  Hi folks, I have hours of footage to intercut from two Canon C100s. With just the two camera tracks, and no effects applied. Much as I wish it would stay at least in "Preview Full" resolution when in multicam mode, I just can't seem to get away from
• Vegas Movie Studio (up to ver. 17)

  7 answers, most recent on 8/4/2017

  [Solved] Is there a way to refund Movie Studio 14?
  Yesterday (1st of August) i bought Vegas Movie Studio 14, but i quickly realized that many features that i need was missing in the standard version (custom rendering templates, multicam editing, etc). That's why i'd like to refund my Movie Studio 14
• Video

  2 answers, most recent on 4/24/2017

  [Solved] multicam edit: change one camera's brightness after edit?
  Got such a quick answer to my last question, I'll try my luck again. Having finished my multicam edit, I realize camera 1 really should have had a brighter exposure throughout to match camera 2. But now I have split up the clip into many pieces
• Video

  3 answers, most recent on 4/24/2017

  [Solved] multicam edit: remove filename from each take window?
  I've used Vegas for many years, starting from before Sony acquired it. I've been using v9 until I finally upgraded yesterday to Vegas 14. Now I'm doing a 2-camera edit using the "multicamera editing" feature. This works OK, but the video filename is
• Audio

  3 answers, most recent on 3/25/2017

  [Solved] SOLVED -- how to restore deleted audio to video event -- SVP 13
  Hi folks, I'm wondering if there is a (simple) way to restore deleted audio to video events on a Vegas Pro 13 timeline. I'm doing a complex multicam edit and unfortunately the video and audio became ungrouped (I believe that's what SVP does when you
• Video

  69 answers, most recent on 5/27/2018

  [Solved] BUG: DEFOCUS FX crashes VP14 down to SVP13 and SVP12.
  I recently completed our annual Nutcracker On Ice show. All worked well aside from the Act1 project that I couldn't render with GPU ON (GPU acceleration of video processing). I had no time to find out why but now I have. In fact I couldn't even open
• Video

  7 answers, most recent on 10/9/2016

  RE: [Solved] Multicamproblem with effects
    @ Set: after the multicam cut and the expansion I would have to apply the effects to ALL clips on the timeline? In my case a few hundred... There are 4 levels of FX can be applied in Vegas Pro: MediaFX - FX applied to whole video source - so in
• Video

  7 answers, most recent on 10/9/2016

  [Solved] Multicamproblem with effects
  Hi! I've got a Multicam problem: -I set up 6 video tracks an did the colour correction for each track. -Then I created a multicam track and activated it. But then I realised that all effects (colour corrections etc.) disappeared. They were not
• Video

  134 answers, most recent on 8/14/2023

  RE: VEGAS Pro 20 Build 411 General Thread
  AMD has similar limitations. Why is a great question for them. The real question in my mind is why Intel added 4:2:2 hardware decoding at a time when all currently made camera sensors only capture 4:2:0. Those cameras that write 4:2:2 formats to