• Video

  17 answers, most recent on 6/13/2014

  RE: Stability - lucky 13 vs 12 vs 11?
  [I]@24Peter, I haven't heard about that "parameters unsupported" issue before. Can you offer any more details?[/I] Not really - it happens randomly and infrequently when I go to render a file from what I can tell. First time it happened I saved a
• Video

  33 answers, most recent on 6/10/2014

  RE: Sony Vegas Pro 13 don't display (DNxHD format) ?
  I carefully say it is the number of clips. I transcoded a 180 clips to DNxHD 220 10bit and tried to put as many as I can into a new project. Like Zayed, VP13 crashed somewhere around 50 clips. Since it crashed and I was unable to count the number of
• Vegas Movie Studio (up to ver. 17)

  49 answers, most recent on 8/25/2014

  RE: Studio 13 crashing at startup...
  Did you see this answer to that amdocl64.dll error? http://forums.creativecow.net/thread/24/951512
• Video

  10 answers, most recent on 5/28/2014

  RE: Vegas Pro 13 Crash on startup
  I have installed on the same PC, Vegas Pro 12 (and never I have had problems, and stiil works), JRiver Media Center 19, GoPro Studio, but I need all these SW (excluding Vegas Pro 12, once I can start Vegas Pro 13, until I cannot start Pro 13, I
• DVD Architect

  6 answers, most recent on 4/24/2014

  RE: Audio Out of Sync with Video
  Thank you ChristoC for the information. I do have a couple of questions, though: 1) Was the wrong choice of storage media the cause of the audio/video out of synchronization? 2) Why these templates(DVDA NTSC video stream and Program stream NTSC)
• DVD Architect

  6 answers, most recent on 4/24/2014

  Audio Out of Sync with Video
  Hello Everyone, I am attempting to create blu-ray discs from some old lecture clips (mp4 format), which I have lost the original source videos. I'm using Vegas Pro 12.0 and DVD Architect Pro 6.0 products for the project. The rendering templates of
• Video

  3 answers, most recent on 4/19/2014

  RE: Cannot finish downloading Microsoft .NET Framework
  Thanks, that worked. Now I have another problem actually running Pro 13, which is that I get a massive "Vegas Pro has stopped working" error. Here's what it says (edit: Uninstalling Vegasaur fixed this). Extra Information File:
• Video

  One answer, on 4/16/2014

  Mercalli disabled during render to Sony AVC 720p
  Anyone have this problem? While rendering out to Sony AVC 720p, when the render gets to my 1080i HDV clips the error of having to re-stabilize pops up about half way through the clip. I didn't catch it in DVDA before I burned to BD, but it sure
• Video

  11 answers, most recent on 3/30/2014

  RE: Advice on PCM audio for Blu-ray
  Thanks for the reply john, but which Wav format in the drop down list do you use? Sony Wave64, Scott Studios Wave, or Microsoft Wave? John EDIT: Looks like people in the past have recommended Microsoft Wave, but the maximum file size limit is
• Vegas Movie Studio (up to ver. 17)

  8 answers, most recent on 3/29/2014

  Cannot open .avi file codec error
  As above. I had K-lite installed and have uninstalled it then done a registry clean then re-installed Movie Studio Platinum 13. Still not working. Mediainfo gave me this not sure what half of it means ;). eneral Complete name
• Video

  53 answers, most recent on 3/25/2014

  RE: Add clips to T/L using their timecode.
  On Absolute Frames...I just want to point out that when you're looking at Absolute Frames, its a measure of timeline frames, not media frames. The Absolute Frames count depends on your project's framerate. It's a minor distinction but take from it
• Video

  19 answers, most recent on 3/20/2014

  RE: WOT: drive letters
  @ECHO OFF :: CURDRIVE.BAT :: :: Substitutes CURDRIVE with NEWDRIVE :: SET NEWDRIVE=B :: SET CURDRIVE= CD | CHOICE /C:ABCDEFGHIJKLMNOPQRSTUVWXYZ > NUL IF ERRORLEVEL 1 SET CURDRIVE=A IF ERRORLEVEL 2 SET CURDRIVE=B IF ERRORLEVEL 3 SET
• Video

  16 answers, most recent on 3/18/2014

  RE: How to make NATURAL looking green-screening?
  To add to the other good advice given: In addition to the issue of lighting the bottom leg and feet appropriately to match the reflectivity of the background plate surface while eliminating green spill (which is difficult in itself in a semi-pro
• Video

  40 answers, most recent on 2/18/2014

  RE: Verbatim Printable DVD+R DL p/n 98319
  The topic of optimal burn speed seems to be a perennial that just keeps coming back. I have always maintained that it makes little difference if the burner is operating correctly and uses a suitable methodology for a particular disk. BUT in the
• Vegas Movie Studio (up to ver. 17)

  No answers, created on 2/6/2014

  Editing DVB recordings
  Hello, I have a few recordings from a DVB HD recorder that I want to edit in Movie Studio 11 Platinum. Goal is to take only a few scenes from each recording and output a single "master" for different devices incl. iPad, Blu-Ray and DVD. I can access
• Video

  31 answers, most recent on 3/24/2014

  RE: Vegas Pro 12 Build 770 - Crashing Constantly
  You are not alone. SVP 10 led me to switch from Media Composer. If I would have known all the heartache I would go through in the next two years with SVP 11 & 12, I never would have switched. However, I believe there are many times more
• Vegas Movie Studio (up to ver. 17)

  19 answers, most recent on 10/20/2014

  .MOV files “break” Sony Movie Studio 12
  .MOV files “break” Sony Movie Studio 12 – Black video preview and renders Sony Movie Studio 12.0 is consistently showing a black preview screen and black rendering of .MOV clips after I put a certain number of source files in my project media bins
• Video

  12 answers, most recent on 6/6/2022

  RE: Getting a weird error when creating Blu-Ray image
  Hi Adam -- Here's some info: 1. There are two files on the timeline - one is an m2t file that I recorded on my Canon XH-A1 HDV camera. The other is a 48K/24-bit WAV file. The video is of a local band concert. 2. Vegas Pro 11 seems to still be
• Video

  One answer, on 1/10/2014

  ReStream utility
  Some of you may not know of this utility, hence the post. I recently wished to copy the movies from some DVDs recorded by a friend's DVD recorder. However, the concatenated VOB files, whether performed by Copy /b or VOB2MPG, appeared to be 4:3
• Video

  8 answers, most recent on 1/12/2014

  RE: AVISynth again, decompressor error, fear of codecs
  https://www.hightail.com/download/elNLU2VwMGswVW0wYjhUQw This is the file I am trying to run through AVISynth with the JohnMeyer Deflicker script. The error is "Couldn't locate a decompressor for fourcc.dll DVSD" Mediainfo: General Complete name
• Video

  2 answers, most recent on 12/29/2013

  Sony Vegas 12 (770) error APPCRASH and AppHangB1
  Hello, Recently bought a new computer with the following parameters: Graphics: Nvidia Geforce 550 Ti Ram: 16 Processor: Intel Core i7-3770 CPU 3,4 GHz Windows 7 Home Premium Sony vegas 12 started using and after a few days errors
• Video

  39 answers, most recent on 12/28/2013

  RE: Vegas Pro 11.0.701 64-bit Will Not Start On PC
  C:\Users\Jamil\AppData\Local\Sony\Vegas Pro\11.0\vst_grovel.log: INFO 2013-12-24 10:12:26 **** Writing search paths to registry **** INFO 2013-12-24 10:12:26 **** Writing mappings to registry **** INFO 2013-12-24 10:12:26 **** Grovel completed with
• Video

  32 answers, most recent on 12/3/2013

  RE: making 23.976fps into 24fps
  Jphnmeyer said: [I]"However, the speed, when measured as how many frames are actually shown each second, is never going to be an exact integer like 16, 18, 24, 30, etc. because the speed control is an analog control and not locked to an atomic
• Video

  4 answers, most recent on 12/2/2013

  A/V Sync time warp
  I recently ran into an audio/video sync problem while recording continuous two hour+ videos in the AVCHD format and rendering the files to the mp-4 format for upload to Vimeo. I reproduced the exact same out of sync condition with two identical