• Video

  19 answers, most recent on 9/19/2023

  RE: Multi-cam project edit worked superb but ColorGrading Panel unusable
  @paul-marshall I find it surprising but maybe you're onto something. Didn't mention it earlier but as soon as I get my camera tracks into alignment, my next step is to do an Audio mix-down which I render to Sony Wave64 24-bit pcm format. After which
• Video

  28 answers, most recent on 5/16/2024

  RE: Timecode sync attempt error message
  So to follow up re my comment from 2 days ago "If importing bwf files gets them to correct timeline position, and Vegas multicam sync gets the R3d files in correct position relative to each other, then I hope moving the R3d files as a block to sync
• Video

  3 answers, most recent on 1/16/2023

  View Multicam AND final preview at the same time?
  Judging the pacing of camera switches is a bit uncomfortable when you have you keep track of which multicam view is active with that green outline around it. I know you can switch off the multicam editing with a CTRL + SHIFT + D shortcut but I'm
• Video

  4 answers, most recent on 4/26/2024

  All My cuts are not on frame boundaries, is there a way to fix them
  I have been editing a multicam video, all the cameras shot in 23.98 and project in 23.98. I was going through the final touches and realized that one of my cuts was not on a frame boundary. I turned on the option to show where they are not on frame
• Video

  31 answers, most recent on 1/23/2024

  RE: best graphics card options for playback
  This is an old thread from 2020. Subsequent posts indicate OP ended up getting an Amd 6900xt with an Arc a770 for decoding. I have that same combination myself. When display performance is my paramount consideration, I get the smoothest most glassy
• Video

  21 answers, most recent on 1/21/2024

  RE: 4K editing PC
  "...how important is het GPU in vegas?" Very important for decoding and timeline acceleration. You could use both, one for decoding and the other for acceleration or any combination that works and suits your fancy. "...32GIG of RAM or do I need
• Video

  21 answers, most recent on 1/21/2024

  RE: 4K editing PC
  @BONLEV I documented my recent system selection here: Intel 13900K I chose Intel because of the on-die video decoding hardware. thx John! I have read the topic. Seems intel is the way to go and not the amd ryzen. But how important is het GPU in
• Video

  6 answers, most recent on 3/4/2025

  RE: Vegas Pro 22 AI Fx SUPER slow to render
  @Sean-Lester AI Upscales over 1.1x seem to always be increasingly gpu intensive as the scale goes up. Doing that to an fhd clip as an Event FX in a 4k project is a 2x upscale, even without any cropping. Only way I know to speed it up there is to use
• Video

  28 answers, most recent on 5/16/2024

  RE: Timecode sync attempt error message
  Making a little progress: Import broadcast wave file and selecting arrange across timeline and use ruler time actually places the bwf files at correct place on timeline. Adding the R3d video files to another track, selecting them and then syncing
• Video

  22 answers, most recent on 7/6/2024

  RE: Vegas Pro 21 Crashes
  The main way to avoid software crashes is to give VEGAS media that's easy to edit. Constant framerate AVC from cameras is usually fine and works well with VEGAS's GPU decoding on modern GPUs. ProRes also works great assuming a CPU and hard drive
• Video

  16 answers, most recent on 10/14/2025

  RE: Give Me A Few Reasons Why Vegas Pro Is A Good Software
  1) It is intuitive - you just drag and drop everything in one window - no need to walk through extra modules like in Resolve 2) It is fastest editing - no other software give you opportunity to edit 2 hours multicam podcast with full of underlying
• Video

  5 answers, most recent on 2/12/2024

  Vegas 21 crash all time with 4k 50fps..
  HELLO. I would like to know if someone can help me because I don't know what else to do.... It has never happened to me until now...I have a very big project, 1 song with 7 shots of different plans...when I synchronize everything, it makes an error
• Video

  4 answers, most recent on 3/20/2024

  RE: Canons C-log Setting
  Not on my c70. There is a separate menu for Custom Picture format which includes clog2, clog3, bt709 wdr, pq, hlg, eos std, eos neutral, and c709. Codec is independently selected in the Recording/Media menu where choices are Raw ST, Raw LT, XF-AVC
• Video

  37 answers, most recent on 2/21/2024

  RE: What is the best graphics card for vegas 21 ?
  Just got the body and lens for my 3rd 4k camera which will also be shooting hevc in my multicams. Up till now I rarely used proxies and only when using a 4:2:2 hd xf305 camera in the mix when all 5 cameras had to be shown at once in pips to select
• Video

  16 answers, most recent on 10/27/2023

  RE: Hevc 11900k decoding
  @nonam3 I only use Arc for decoding as though it was an igpu. I use Amd's in my desktops as the main gpus. My laptop is the only one I have with an Nvidia (3060) as the main gpu plus an Intel Iris as the igpu. The laptop is reasonably decent for the
• Video

  6 answers, most recent on 3/4/2025

  RE: Vegas Pro 22 AI Fx SUPER slow to render
  @Sean-Lester AI Upscales over 1.1x seem to always be increasingly gpu intensive as the scale goes up. Doing that to an fhd clip as an Event FX in a 4k project is a 2x upscale, even without any cropping. Only way I know to speed it up there is to
• Video

  20 answers, most recent on 7/23/2024

  RE: How do I enable 4:2:2 10 Bit Rendering
  There are times where it matters... I notice it a lot when editing concerts with harsh red stage lighting. I've found that if I pay proper attention to white balance and iris, chroma sub-samping doesn't matter. It had some impact when I used 3ccd hd
• Video

  35 answers, most recent on 8/11/2024

  RE: Changing proxy format to speed up Proxy Building in Vegas 22
  ... Works best for me (for marker frame-alignment) with manually-made proxies having the same or at least an even-division of the original frame rates. With Vegas proxies have the same amount of frames as the original, so no fear for mis-frame
• Video

  9 answers, most recent on 12/3/2023

  RE: MXF file from Sony x70 won't open
  Lesson learned... After copy to drive (whether it is a direct copy or using Sony Catalyst or Playmemories), better do quick check up doing playback first with them (Catalyst / Playmemories) or if you have a chance, load it to VEGAS Pro (or whatever
• Video

  6 answers, most recent on 11/8/2023

  Vp21 update: Adjustment events just got better for me
  Been trying to get some use out of adjustment events in my multicam projects. To fade all the camera tracks together without regard to crossfades between cameras during a song-fade at the end, usually during audience applause. My classic way of
• Video

  95 answers, most recent on 11/17/2025

  RE: What is the best AMD driver at the moment for VP20 ?
  Just updated all my desktop machines to 23.4.3 and it looks pretty good on all the benches. Continuing a multicam project and so far so good with that. Only use a single 32-inch 4k monitor shared via a kvm switch and that works well too.
• Video

  659 answers, most recent on 11/29/2025

  RE: VEGAS Pro Feature Requests
  Like to see a new feature to facilitate multicam... the ability to specify a camera lut to be incorporated into Vegas' proxy file generation. Would suggest the ability to specify a camera lut during the media import process and then apply the lut to
• Video

  22 answers, most recent on 1/15/2024

  RE: Bogus Review in PC Magazine
  Sadly, people look for confirmation bias in just about everything. I had PD many years ago because it could do multicam editing. I tried a few of it's features, they were nice, but for me, nothing special. I can't comment on it today though. I've
• Video

  3 answers, most recent on 1/16/2023

  RE: View Multicam AND final preview at the same time?
  I suggest using a conventional, not a multicam project in Vegas.