AddMercalli - Mercalli V4 Automation

Peter_P wrote on 10/31/2016, 3:41 AM

Hello together,

during Mai 2014 I wrote a Vegas pro custom command to automatically apply Mercalli 2.0 FX to video event and let it be analyzed. In September 2015 these functions have been adapted to the Mercalli v4 FX. Now that Vegas pro 14 is available, I enhanced this automation tool and added some features.

You now may select a preset or use the tuned settings of an event that already has adapted setting to be applied to the next events. Specify the number of events to add the Mercalli v4 FX and let it automatically be analyzed.

The Remap Mode ‘Cubic’ provides the best quality results. However, it requires a lot of power and may result in non real time preview. So you may change it in all Mercalli v4 events to ‘Linear’ or ‘Nearest’ during editing and change it back to ‘Cubic’ for final rendering.

You only may have one Mercalli stabilization FX on each event. If you want to use a pre Vegas pro 14 project with Mercalli 2.0 FX, use the ‘Remove Mercalli 2 FX’ to do so starting from the selected video event.

The AddMercalli_V4_2.01.zip file contains a brief description as a pdf and the two file that need to be copied to the ‘Application Extensions’ folder.

This tool is for free but with no obligation of any kind to me.

Edit 04Nov16
The current functionality of V2.01 was adapted to be used with Vegas pro 13.

 

Release History AddMercalli v4 for Vegas pro 14:
Initial Release 31.Oct.2016 AddMercalli_V4_2.01.zip
Update 26.Sep2017 AddMercalli_V4_2.1.0.zip
 

Release History AddMercalli v4 for Vegas pro 13:
Initial public Version 30.Sep2015 AddMercalli_V4_1.00.zip
Update 04.Nov2016 AddMercalli_V4_Vp13_2.02.zip
 

You may download these files from this location using the password : '31oct2016' (without quotes)

 

 

Comments

bmw-boxer wrote on 10/31/2016, 6:58 AM

Klasse von dir !!!

 

Leider aber bekomme ich es nicht zum laufen.

Ich wollte es so machen: ... must be copied to the folder : "C:\ProgramData\VEGAS Pro\Application Extensions\".

Aber bei mir ist noch "14.0" dazwischen, also "C:\ProgramData\VEGAS Pro\14.0\Application Extensions\".

 

Aber egal, ob ich deine beiden Datein jetzt in "C:\ProgramData\VEGAS Pro\Application Extensions\" oder "C:\ProgramData\VEGAS Pro\14.0\Application Extensions\" einfüge: Der Menüpunkt ERWEITERUNGEN bleibt bei meinem VEGAS PRO 14 leer.

 

Könnte das mit meiner Deutschen Version von VP14 zusammenhängen?

Peter_P wrote on 10/31/2016, 7:48 AM

Bei mir sieht das so aus:

Quitter wrote on 10/31/2016, 9:26 AM

you must unlock the dll

Du musst die dll freigeben

Last changed by Quitter on 10/31/2016, 9:30 AM, changed a total of 2 times.

Camcorder: Sony CX 520 VE
Hardware:   Acer Aspire VN7-791G, Win 10 Home 1709, i7-4720 HQ, 8GB, GTX960M, 120 GB SSD, 1 TB HDD
NLE:  Sony Vegas Pro 13.0 Build 453
           Vegas Pro 14.0 Build 270

bmw-boxer wrote on 10/31/2016, 11:20 AM

@Quitter: Nach der Freigabe der DLL klappt es - danke für den Hinweis.

 

@Peter_P: Wär sicher nicht falsch, diese Freigabe-Notwendigkeit (nur unter Windows 10?) mit in deine zugehörige PDF aufzunehmen.

 

Peter_P wrote on 10/31/2016, 11:23 AM

Ja, werde ich machen. Ich kannte dieses Problem bisher nicht.

wwaag wrote on 11/1/2016, 10:21 PM

Peter,

Is the script for Mercalli V2 still available? Danke (only Deutsch ich sprechen--Lol)

wwaag

Peter_P wrote on 11/2/2016, 1:43 AM

Hi wwaang,

ja in der Version 1.01 schau mal hier. Da Mercalli 2.0 unter Vp14 leider die 'Analyze' Funktion nicht mehr unterstützt, macht es aber keinen Sinn diese Automation für Vp14 anzupassen.

 

alessandro-c wrote on 11/2/2016, 4:44 AM

Thank you for your add-in. I used it in Vegas 13 and I found it very useful. Unfortunately neither your extension, nor the similar function in Vegasaur have a CMOS Fixr automation. It could be VERY useful!

Peter_P wrote on 11/2/2016, 8:06 AM

Hi Alessandro,

up to now I had no need to use the CMOS Fixr and therefore did not concider to write an automation for that FX. For what kind of footage do you need it ?

alessandro-c wrote on 11/2/2016, 8:26 AM

Thank you for your answer, Peter_P.

My footage are shaky HDV and shaky AVC clips with various CMOS camcorders.

I usually stabilize the clips in batch mode with the stand alone Mercalli app, with excellent results, and I think that what makes Mercalli greatly superior to standard Vegas stabilization is CMOS Fixr.  Sometimes, when some clips are very shaky, I do a second pass with good old Virtualdub Deshaker.

I would like to do a batch stabilization with Mercalli (stabilizr + fixr) inside Vegas.

Alessandro

Peter_P wrote on 11/2/2016, 9:45 AM

Thanks, I'll have a second lock at the CMOS Fixr. If I feel I'll need it, I'll write an automation - but surely not in the next weeks.

Peter

Peter_P wrote on 11/4/2016, 9:38 AM

I was asked to make the current Version of AddMercalli_V4 also availabe for Vegas pro 13. See top of thread.

Peter

Peter_P wrote on 8/28/2017, 10:43 AM

There is a new version of Mercalli v4 (Version 4.0.477.1) which should be down loaded from the proDAD or Magix account and installed to make Mercalli v4 usable with Vp15. The AddMercalli_V4_2.01.zip (see top post) is also working with Vp15.

Nick Hope wrote on 8/28/2017, 11:32 AM

The older Mercalli v4 4.0.470.1 plugin is version-locked to VP14 and gives "invalid serial number" and a watermark in VP15, 13, 12 etc.. I can't find a link to this new version 4.0.477.1 in either my MAGIX or proDAD account. Anyone know a direct link?

Peter_P wrote on 8/28/2017, 11:39 AM

Did you try downloading the mercalli-40-vegas64bit.exe via your proDAD account? Unfortunately they do not have the version number in the filename.

Nick Hope wrote on 8/28/2017, 11:42 AM

Did you try downloading the mercalli-40-vegas64bit.exe via your proDAD account? Unfortunately they do not have the version number in the filename.

I'm only finding this file which is installing version 4.0.470.1.

Nick Hope wrote on 8/28/2017, 12:34 PM

I have contacted proDAD support about this updated version.

Peter_P wrote on 8/29/2017, 2:18 AM

Did you try downloading the mercalli-40-vegas64bit.exe via your proDAD account? Unfortunately they do not have the version number in the filename.

I'm only finding this file which is installing version 4.0.470.1.


The new version file has a size of 12.3MB.

Nick Hope wrote on 8/29/2017, 3:25 AM

Did you try downloading the mercalli-40-vegas64bit.exe via your proDAD account? Unfortunately they do not have the version number in the filename.

I'm only finding this file which is installing version 4.0.470.1.


The new version file has a size of 12.3MB.

And the old one 9.43MB. Can you please clarify exactly where you downloaded it? Is there a URL you can share?

Marco. wrote on 8/29/2017, 3:28 AM

As mentioned in other posts the new version 4.0.477.1 (which is 12,3 MB here) doesn't help.

Peter_P wrote on 8/29/2017, 3:59 AM

Is there a URL you can share?

No, I was told one should use the link that was contained in the purchase confirmation mail.

michael-tsagares wrote on 9/21/2017, 10:37 AM

Hello.  What a cool app, just what I need!  However, I have been trying to get Vegas Pro 14 build 270 to see the extension.  For some reason my extensions button is greyed and says "no extensions"  I added the folder Application Extensions where you stated (and tried several other locations) and pasted the extracted dll and png files.  I even did a CLEAN reinstall of everything.  I am very frustrated because I need to be able to batch render many stabilized clips after changing my frame rate.  Can you please give me some insight as to what could be wrong?  Is there an "enable extensions button" somewhere?  Thank you

 

Peter_P wrote on 9/21/2017, 10:46 AM

On my Win10 System the dll is installed at C:\ProgramData\VEGAS Pro\Application Extensions\

If this folder is not shown on your system, you should allocate it. In addition you might need to unlock the downloaded file see :

https://www.vegascreativesoftware.info/us/forum/addmercalli-mercalli-v4-automation--104306/#ca644608

Peter_P wrote on 9/26/2017, 7:22 AM

On my current project I often had to change the parameter for one pan or event with motion and then set back the count and parameter for a fixed camera setting. To keep this setting and count fixed for the events behind the one with motion setting, I now added a button to just add one Mercalli FX to the next selected event.

Therefore I modified the interface slightly and added this button.

Details can be found in the also updated PDF in the zip file (see top of thread).