With the Nvidia 1660 Super no problems, only when i disable my Nvidia GPU and Vegas works only with the Intel 630 with driver 30.0.100.9805 there were problems - see crash report:

Maybe I should update the driver again to the same version as @j-v - but Vegas does not find any drivers when searching - is this a known problem?

@walter-i.

Same here. Transitions work fine with nvidia but not with intel. I will also try the driver recommended by @j-v

Timeline preview is usually fine but render or pre-render (Shift + M) is corrupt with intel.

Vegas doesn't find driver updates for intel.

@walter-i.

Same here. Transitions work fine with nvidia but not with intel.

Doesn't matter much to me - I just wanted to follow @j.v's test.

Vegas doesn't find driver updates for intel.

They used to be found, but for some time now it doesn't work for me.
Thanks for the confirmation @misohoza

Some time ago Intel changed the way to look for the newest video drivers and probably the seekoption in Vegas has not been changed.
I search mostly by hand and look for it on this site

GL Transitions, No problem here, in 4k 3840x2160 they work ok, some need a Dynamic ram or prerender to work absolutely fluidly but they do work quite well without, HD 1920x1080 works fluidly first time, no Dynamic ram or prerender, I haven't got intel tho.

Is there any hope that the effects will be organized by folders again? It's more organized and practical that way.

@Joelson +1, with BCC plugins installed, the FX wondows shows very messy and Each time opening the Vegas to search plugins, vegas freezes for about 3 minutes. 

@lan-mLMC I'm sort of getting used to opening Vegas, typing something in the search, then go to put the kettle on & make a drink, it's done it's thing by then 😂 A bit more order would be nice, '+1 with BCC plugins installed', it's a lot to scroll through,

Since the update I've had an issue with adding music. It squealches instead of playing. Anyone else experience this?

I couldn't find a space for suggestions, but it would be very helpful if at the beginning of the update process you could see the new version number. I like to set a restore point before I install new software, and I also like to note the version number, like "Before updating Vegas Pro to ver x.x.x Build xxx". The only point I see the version number for Vegas Pro is after the download, after the install has started, then it asks if I want to update the installed version.

Since the update I've had an issue with adding music. It squealches instead of playing. Anyone else experience this?

@MarkBlaze - B458 working fine with Audio/Music imports.

Clips that were imported well until yesterday are not imported after the update? Does anyone have this problem? Although it is a QuickTime mov file, there are files that are imported for each file and some clips that cannot be imported, but all were imported before the update.

I've reproed Transition "Vegas Stopped Working" with GPU OFF and then using UNDOs. Sent Report.

Here's what I did:

1. GPU OFF
2. Using UNDOs > B458 Stops working.
3. GPU ON
4. Using UNDOs > B458 Starts working correctly.

@GaryRebholz - Hope this helps.

Others could join in - @j-v 😉

Clips that were imported well until yesterday are not imported after the update? Does anyone have this problem?

@yoo-changyun - Working fine here. Need to know a bit more. What GPU are you using? Is it ON or OFF?

당신이 올까요? 트롯지이스트가?

@yoo-changyun - 여기에서 @yoo-changyun 작동합니다. 조금 더. GPU를 사용하고 있습니까? ON OFF인가?

It's a gtx 2060, and I tried on and off, and both had problems. There was no problem in the previous version of 458.

@yoo-changyun - Ah, right. OK, there was no “previous” version of “458”. 458 is a Build - Build458 is a build of VP19. Pleas confirm that you have been OK with previous Builds of VP19? Is this the first time you have used VP19? What version of VegasPro had you been using before? VP18, VP17?

@yoo-changyun  - @yoo-changyun . 알겠습니다. "458"의 "이전" 버전이 변경되었습니다. 458은 빌드 - Build458은 VP19의 빌드입니다. VP19의 이전 옷에 것? VP19는 이번 신규발병? 이전에 버전의 VegasPro를 사용했습니까? VP18, VP17?

Vegas 19 빌드 424 버전에는 문제가 없었습니다. Vegas 18도 문제 없이 가져옵니다. 문제는 Vegas 19 bild 458에 있습니다.

There were no problems with Vegas 19 build 424 version. Vegas 18 also imports without problems. The problem is in Vegas 19 bild 454.

@yoo-changyun - Thank you. I don't know Build454? Typo? Try Build458.

Vegas 19 빌드 424 버전에는 해당 언어가 포함되어 있습니다. 라스베거스 18도 추가 동료 추가. 중요한 것은 Vegas 19 bild 454입니다.

@yoo-changyun - 감사합니다. 나는 Build454를? 오식? Build458을 학습하세요.

It's build 458...
I'm reading posts from people who have this problem other than me.

@yoo-changyun - DO you have QT checked under the Deprecated Tab?:

Since the update I've had an issue with adding music. It squealches instead of playing. Anyone else experience this?

@MarkBlaze
In a German forum, we have been able to solve this by resetting to factory default.
Try it - maybe it helps.
https://www.vegascreativesoftware.info/us/forum/faq-how-can-i-reset-vegas-pro-to-default-settings--104646/

Clips that were imported well until yesterday are not imported after the update? Does anyone have this problem? Although it is a QuickTime mov file, there are files that are imported for each file and some clips that cannot be imported, but all were imported before the update.

@yoo-changyun
Check out this thread to see if it helps!
https://www.vegascreativesoftware.info/de/forum/mov--133405/

Is it possible to TURN OFF the auto-resize crop/filters window? It is jumping all the time, hard to use for me.

Thanks.