Transfer of SCS serial numbers

Comments

m2016 wrote on 11/17/2016, 5:52 AM

@SandyG: Please take a look at "My products" section in your MAGIX Account (MAGIX Service Center)

vkmast wrote on 11/17/2016, 6:50 AM

Note though that "All downloads there should be the rebranded builds."

Source: https://www.vegascreativesoftware.info/us/forum/sony-vegas-13-has-disappeared-where-to-download--104352/#ca645329

 

SandyG wrote on 11/17/2016, 12:57 PM

@m2016 It's magix-ly been fixed. I now see all the data in my account.

Thanks for the fix on the account S/N's. 

Sandy

Kimberly wrote on 11/26/2016, 9:33 AM

Hello All:

I was able to migrgrate my old SCS account, but I'm not sure where I can see my SNs. Will it be in My Account/My Software?  That area is current not populated. 

NickHope wrote on 11/29/2016, 10:58 PM

I waited over a month but still no programs showed up in my account, so I registered them manually. Everything worked successfully. Every program I ever bought from SCS could be registered. As others have said, only products that have had a MAGIX/VEGAS-branded version built are available to actually download there (in my case, VEGAS Pro 14, VEGAS Pro 13, DVD Architect 6, CD Architect 5.2, and Sound Forge 11.0). Installers for earlier software need to be downloaded from SCS.

Grazie wrote on 12/4/2016, 12:44 AM

. . only products that have had a MAGIX/VEGAS-branded version built .. .

Nick, I don't understand. Please explain. I was under the impression that MAGIX had purchased ALL the SCS lines, does this not apply to the pre-existing branded ties being carried over?

The following are on My Account on the MAGIX.COM site with their S/Ns:

  • Sound Forge 10
  • DVDA4.5/5
  • VP12 and before

But there isn't a provision for neither D/L nor install instructions. And yes, I understand one can D/L from that other link.

Here's my more urgent query, who would then sanction the final install on my PC of the S/W I've listed above? SCS? I wouldn't have thought so. And, if it should be MAGIX, is there a statement from them confirming that they will complete the new install procedure for me/others?

vkmast wrote on 12/4/2016, 2:45 AM

Grazie, Nick was just wondering as well.

https://www.vegascreativesoftware.info/us/forum/how-to-download-vegas-pro-13-0-build-453-last-sony-version-pre-magix-etc--103229/#ca647435

Note to others: Vegas Pro 12 is not listed in the SCS archive downloads. The D/L link and other valuable advice in the first post of the above thread.

 

m2016 wrote on 12/5/2016, 7:53 AM

The registration and activation of all software products MAGIX took over will be done via the MAGIX servers. Just try out the "Register from another computer" option.

southpawami wrote on 12/6/2016, 2:58 PM

Well, I have NONE of my Sony serial numbers in my Magix account. So... ALL of my Sony software is now gone(and my Vegas Training videos), save software through Steam. What little was installed on my computer, like Spectralayers now makes a Magix request and does not work. Unless this gets fixed, the likelihood I will ever buy Magix software or update or recommend is now seriously compromised. And for that matter, because of this, my enjoyment of Sony Creative Software is compromised also.

I submitted a ticket, and was referred to this post because it had all the answers. Well, the post mentions October, and now it is December, and years worth of Sony software is gone. I am... annoyed.

vkmast wrote on 12/6/2016, 3:43 PM

I suppose you did check on your old Sony Creative Software account (My Account > My Software) in case your Serial Numbers just might be there still? If they are not, let's hope this gets the attention of a MAGIX moderator it deserves.

NickHope wrote on 12/6/2016, 10:19 PM

Well, I have NONE of my Sony serial numbers in my Magix account. So... ALL of my Sony software is now gone(and my Vegas Training videos)...

I don't believe any software has yet been intentionally removed from our Sony accounts. I recommend you carefully follow section 4a of this guide. If you find your software there, download all the installers and save your serial numbers (they might disappear at any time) and then follow section 2b of that guide to manually register your software on the MAGIX site.

m2016 wrote on 12/7/2016, 7:54 AM

@southpawami: Just take a look into your MAGIX Account in the MAGIX Service Center.

GJeffrey wrote on 12/8/2016, 2:51 AM

None of my previous SCS software appear on my Magix account.

When will it be done?

vkmast wrote on 12/8/2016, 4:09 AM

GJ, from https://www.vegascreativesoftware.info/us/forum/how-to-download-vegas-pro-13-0-build-453-last-sony-version-pre-magix-etc--103229/#ca647555 "This process is still ongoing..." (12/05/2016)

GJeffrey wrote on 12/8/2016, 5:35 AM

Thanks VK. I didn't expect this to take so long to be fomplete especially when some users got them only few days after Oct 25th...

Wait n See but Magix should give us deadline.

BruceUSA wrote on 12/28/2016, 8:44 PM

None of my SCS softwares registerable with Magix. . When I tried to register manually. I got this message copy & paste here.

Wrong product registration number

Please check your entries again.
If necessary, use the product registration directly from within your MAGIX product.

Last changed by BruceUSA on 12/28/2016, 9:02 PM, changed a total of 1 times.

Intel i7 12700k @5.2Ghz all P Cores, 5.3@ 6 Core, Turbo boost 3 Cores @5.4Ghz. 4.1Ghz All E Cores.                                          

MSI Z690 MPG Edge DDR5 Wifi                                                     

TEAMGROUP T-Force Delta RGB 32GB DDR5 -6200                     

Samsung 980 Pro x4 Nvme .M2 1tb Pcie Gen 4                                     

ASRock RX 6900XT Phantom 16GB                                                        

PSU Eva Supernova G2 1300w                                                     

Black Ice GTX 480mm radiator top mount push/pull                    

MCP35X dual pump w/ dual pump housing.                                

Corsair RGB water block. RGB Fan thru out                           

Phanteks Enthoo full tower

Windows 11 Pro

BruceUSA wrote on 12/29/2016, 11:00 AM

Just want to update what is going here. Because of my above post/  I got panic about what if SONY SCS shutdown and unable to register my SCS software.  So,  I take out my SONY Sound Forge Audio Studio 10 DVD Disc and install the software.  The registration show the product is registered with SONY SCS.  DONE.   I log in to Magix web to check out my SCS products.  And guess what my SONY Sound Forge Audio Studio 10 shown up on Magix account.   This what led me to believed you have to re- register all your SCS softwares.  When you register your Sony product, it will bounce the registration process to Magix automatically. 

 

Intel i7 12700k @5.2Ghz all P Cores, 5.3@ 6 Core, Turbo boost 3 Cores @5.4Ghz. 4.1Ghz All E Cores.                                          

MSI Z690 MPG Edge DDR5 Wifi                                                     

TEAMGROUP T-Force Delta RGB 32GB DDR5 -6200                     

Samsung 980 Pro x4 Nvme .M2 1tb Pcie Gen 4                                     

ASRock RX 6900XT Phantom 16GB                                                        

PSU Eva Supernova G2 1300w                                                     

Black Ice GTX 480mm radiator top mount push/pull                    

MCP35X dual pump w/ dual pump housing.                                

Corsair RGB water block. RGB Fan thru out                           

Phanteks Enthoo full tower

Windows 11 Pro

fawtz wrote on 2/7/2017, 10:39 PM

To add one more option to Bruce's one that just worked for me these last minutes, I could go back to the older SCS page and was able to find my account with everything I've owned since the start with all the serial numbers and everything on the page after remembering my former e-mail adress and pw at the time. I was able to re-install everything and register online except for Sound Forge Studio which was an old Sonic Foundry product so the link doesn't work to register anymore. No big deal: the soft' is working ok...

Attaching pics so if somebody else goes throught this, it might help somehow...(the link is on the picture and the way to get back to an old account in the menu...)

vkmast wrote on 2/8/2017, 7:26 AM

Yes, this method is mentioned in Nick's FAQ, section 4. > 4a. Note Nick's comment on which versions you are able to download from your SCS Account / My Software.

m2016 wrote on 2/8/2017, 11:44 AM

@fawtz: see pn

fawtz wrote on 2/13/2017, 3:29 PM

So true ! my mistake... O_O

I replied with another set of pictures m2016

 

set wrote on 2/19/2017, 5:44 PM

Just saw my serial numbers listed on Magix's account and 'registered' at Jan 18 2017.

Setiawan Kartawidjaja
Bandung, West Java, Indonesia (UTC+7 Time Area)

Personal FB | Personal IG | Personal YT Channel
Chungs Video FB | Chungs Video IG | Chungs Video YT Channel
Personal Portfolios YouTube Playlist
Pond5 page: My Stock Footage of Bandung city

 

System 5-2021:
Processor: Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz   2.90 GHz
Video Card1: Intel UHD Graphics 630 (Driver 31.0.101.2127 (Feb 1 2024 Release date))
Video Card2: NVIDIA GeForce RTX 3060 Ti 8GB GDDR6 (Driver Version 551.23 Studio Driver (Jan 24 2024 Release Date))
RAM: 32.0 GB
OS: Windows 10 Pro Version 22H2 OS Build 19045.3693
Drive OS: SSD 240GB
Drive Working: NVMe 1TB
Drive Storage: 4TB+2TB

 

System 2-2018:
ASUS ROG Strix Hero II GL504GM Gaming Laptop
Processor: Intel(R) Core(TM) i7 8750H CPU @2.20GHz 2.21 GHz
Video Card 1: Intel(R) UHD Graphics 630 (Driver 31.0.101.2111)
Video Card 2: NVIDIA GeForce GTX 1060 6GB GDDR5 VRAM (Driver Version 537.58)
RAM: 16GB
OS: Win11 Home 64-bit Version 22H2 OS Build 22621.2428
Storage: M.2 NVMe PCIe 256GB SSD & 2.5" 5400rpm 1TB SSHD

 

* I don't work for VEGAS Creative Software Team. I'm just Voluntary Moderator in this forum.

m2016 wrote on 2/20/2017, 11:36 AM

Just saw my serial numbers listed on Magix's account and 'registered' at Jan 18 2017.

Thanks for the information. That means your account & products were migrated.

vkmast wrote on 2/20/2017, 11:43 AM

While we're on the subject, can someone tell me why "all my past trials" were registered as well on Jan 19, 2017?